When a PCI device is detected, pdev->is_added is set to 1 and proc and
sysfs entries are created.
When the device is removed, pdev->is_added is checked for one and then
device is detached with clearing of proc and sys entries and at end,
pdev->is_added is set to 0.
is_added and is_busmaster are bit fields in pci_dev structure sharing same
memory location.
A strange issue was observed with multiple removal and rescan of a PCIe
NVMe device using sysfs commands where is_added flag was observed as zero
instead of one while removing device and proc,sys entries are not cleared.
This causes issue in later device addition with warning message
"proc_dir_entry" already registered.
Debugging revealed a race condition between the PCI core setting the
is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue
setting the is_busmaster bit in pci_set_master(). As these fields are not
handled atomically, that clears the is_added bit.
Move the is_added bit to a separate private flag variable and use atomic
functions to set and retrieve the device addition state. This avoids the
race because is_added no longer shares a memory location with is_busmaster.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283
Signed-off-by: Hari Vyas <hari.vyas@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
#include <asm/ppc-pci.h>
#include <asm/eeh.h>
+#include "../../../drivers/pci/pci.h"
+
/* hose_spinlock protects accesses to the the phb_bitmap. */
static DEFINE_SPINLOCK(hose_spinlock);
LIST_HEAD(hose_list);
/* Cardbus can call us to add new devices to a bus, so ignore
* those who are already fully discovered
*/
- if (dev->is_added)
+ if (pci_dev_is_added(dev))
continue;
pcibios_setup_device(dev);
#include "powernv.h"
#include "pci.h"
+#include "../../../../drivers/pci/pci.h"
#define PNV_IODA1_M64_NUM 16 /* Number of M64 BARs */
#define PNV_IODA1_M64_SEGS 8 /* Segments per M64 BAR */
struct pci_dn *pdn;
int mul, total_vfs;
- if (!pdev->is_physfn || pdev->is_added)
+ if (!pdev->is_physfn || pci_dev_is_added(pdev))
return;
pdn = pci_get_pdn(pdev);
#include <asm/security_features.h>
#include "pseries.h"
+#include "../../../../drivers/pci/pci.h"
int CMO_PrPSP = -1;
int CMO_SecPSP = -1;
const int *indexes;
struct device_node *dn = pci_device_to_OF_node(pdev);
- if (!pdev->is_physfn || pdev->is_added)
+ if (!pdev->is_physfn || pci_dev_is_added(pdev))
return;
/*Firmware must support open sriov otherwise dont configure*/
indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL);
return;
}
- dev->is_added = 1;
+ pci_dev_assign_added(dev, true);
}
EXPORT_SYMBOL_GPL(pci_bus_add_device);
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip already-added devices */
- if (dev->is_added)
+ if (pci_dev_is_added(dev))
continue;
pci_bus_add_device(dev);
}
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Skip if device attach failed */
- if (!dev->is_added)
+ if (!pci_dev_is_added(dev))
continue;
child = dev->subordinate;
if (child)
list_for_each_entry(dev, &bus->devices, bus_list) {
/* Assume that newly added devices are powered on already. */
- if (!dev->is_added)
+ if (!pci_dev_is_added(dev))
dev->current_state = PCI_D0;
}
/* pci_dev priv_flags */
#define PCI_DEV_DISCONNECTED 0
+#define PCI_DEV_ADDED 1
static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)
{
return test_bit(PCI_DEV_DISCONNECTED, &dev->priv_flags);
}
+static inline void pci_dev_assign_added(struct pci_dev *dev, bool added)
+{
+ assign_bit(PCI_DEV_ADDED, &dev->priv_flags, added);
+}
+
+static inline bool pci_dev_is_added(const struct pci_dev *dev)
+{
+ return test_bit(PCI_DEV_ADDED, &dev->priv_flags);
+}
+
#ifdef CONFIG_PCI_ATS
void pci_restore_ats_state(struct pci_dev *dev);
#else
dev = pci_scan_single_device(bus, devfn);
if (!dev)
return 0;
- if (!dev->is_added)
+ if (!pci_dev_is_added(dev))
nr++;
for (fn = next_fn(bus, dev, 0); fn > 0; fn = next_fn(bus, dev, fn)) {
dev = pci_scan_single_device(bus, devfn + fn);
if (dev) {
- if (!dev->is_added)
+ if (!pci_dev_is_added(dev))
nr++;
dev->multifunction = 1;
}
{
pci_pme_active(dev, false);
- if (dev->is_added) {
+ if (pci_dev_is_added(dev)) {
device_release_driver(&dev->dev);
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
- dev->is_added = 0;
+
+ pci_dev_assign_added(dev, false);
}
if (dev->bus->self)
unsigned int transparent:1; /* Subtractive decode bridge */
unsigned int multifunction:1; /* Multi-function device */
- unsigned int is_added:1;
unsigned int is_busmaster:1; /* Is busmaster */
unsigned int no_msi:1; /* May not use MSI */
unsigned int no_64bit_msi:1; /* May only use 32-bit MSIs */