--- /dev/null
+* Marvell EBU PCIe interfaces
+
+Mandatory properties:
+- compatible: one of the following values:
+ marvell,armada-370-pcie
+ marvell,armada-xp-pcie
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- bus-range: PCI bus numbers covered
+- device_type, set to "pci"
+- ranges: ranges for the PCI memory and I/O regions, as well as the
+ MMIO registers to control the PCIe interfaces.
+
+In addition, the Device Tree node must have sub-nodes describing each
+PCIe interface, having the following mandatory properties:
+- reg: used only for interrupt mapping, so only the first four bytes
+ are used to refer to the correct bus number and device number.
+- assigned-addresses: reference to the MMIO registers used to control
+ this PCIe interface.
+- clocks: the clock associated to this PCIe interface
+- marvell,pcie-port: the physical PCIe port number
+- status: either "disabled" or "okay"
+- device_type, set to "pci"
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- ranges, empty property.
+- interrupt-map-mask and interrupt-map, standard PCI properties to
+ define the mapping of the PCIe interface to interrupt numbers.
+
+and the following optional properties:
+- marvell,pcie-lane: the physical PCIe lane number, for ports having
+ multiple lanes. If this property is not found, we assume that the
+ value is 0.
+
+Example:
+
+pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */
+ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
+ 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 6>;
+ status = "disabled";
+ };
+
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+ reg = <0x1800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 7>;
+ status = "disabled";
+ };
+
+ pcie@4,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+ reg = <0x2000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 8>;
+ status = "disabled";
+ };
+
+ pcie@5,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 9>;
+ status = "disabled";
+ };
+
+ pcie@6,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+ reg = <0x3000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 63>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <1>;
+ clocks = <&gateclk 10>;
+ status = "disabled";
+ };
+
+ pcie@7,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+ reg = <0x3800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 64>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <2>;
+ clocks = <&gateclk 11>;
+ status = "disabled";
+ };
+
+ pcie@8,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+ reg = <0x4000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 65>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <3>;
+ clocks = <&gateclk 12>;
+ status = "disabled";
+ };
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 26>;
+ status = "disabled";
+ };
+
+ pcie@10,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+ reg = <0x5000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 103>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 27>;
+ status = "disabled";
+ };
+};
--- /dev/null
+/*
+ * PCIe driver for Marvell Armada 370 and Armada XP SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mbus.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+/*
+ * PCIe unit register offsets.
+ */
+#define PCIE_DEV_ID_OFF 0x0000
+#define PCIE_CMD_OFF 0x0004
+#define PCIE_DEV_REV_OFF 0x0008
+#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
+#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
+#define PCIE_HEADER_LOG_4_OFF 0x0128
+#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
+#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
+#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
+#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
+#define PCIE_WIN5_CTRL_OFF 0x1880
+#define PCIE_WIN5_BASE_OFF 0x1884
+#define PCIE_WIN5_REMAP_OFF 0x188c
+#define PCIE_CONF_ADDR_OFF 0x18f8
+#define PCIE_CONF_ADDR_EN 0x80000000
+#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
+#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
+#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
+#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
+#define PCIE_CONF_ADDR(bus, devfn, where) \
+ (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
+ PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
+ PCIE_CONF_ADDR_EN)
+#define PCIE_CONF_DATA_OFF 0x18fc
+#define PCIE_MASK_OFF 0x1910
+#define PCIE_MASK_ENABLE_INTS 0x0f000000
+#define PCIE_CTRL_OFF 0x1a00
+#define PCIE_CTRL_X1_MODE 0x0001
+#define PCIE_STAT_OFF 0x1a04
+#define PCIE_STAT_BUS 0xff00
+#define PCIE_STAT_LINK_DOWN BIT(0)
+#define PCIE_DEBUG_CTRL 0x1a60
+#define PCIE_DEBUG_SOFT_RESET BIT(20)
+
+/*
+ * This product ID is registered by Marvell, and used when the Marvell
+ * SoC is not the root complex, but an endpoint on the PCIe bus. It is
+ * therefore safe to re-use this PCI ID for our emulated PCI-to-PCI
+ * bridge.
+ */
+#define MARVELL_EMULATED_PCI_PCI_BRIDGE_ID 0x7846
+
+/* PCI configuration space of a PCI-to-PCI bridge */
+struct mvebu_sw_pci_bridge {
+ u16 vendor;
+ u16 device;
+ u16 command;
+ u16 status;
+ u16 class;
+ u8 interface;
+ u8 revision;
+ u8 bist;
+ u8 header_type;
+ u8 latency_timer;
+ u8 cache_line_size;
+ u32 bar[2];
+ u8 primary_bus;
+ u8 secondary_bus;
+ u8 subordinate_bus;
+ u8 secondary_latency_timer;
+ u8 iobase;
+ u8 iolimit;
+ u16 secondary_status;
+ u16 membase;
+ u16 memlimit;
+ u16 prefmembase;
+ u16 prefmemlimit;
+ u32 prefbaseupper;
+ u32 preflimitupper;
+ u16 iobaseupper;
+ u16 iolimitupper;
+ u8 cappointer;
+ u8 reserved1;
+ u16 reserved2;
+ u32 romaddr;
+ u8 intline;
+ u8 intpin;
+ u16 bridgectrl;
+};
+
+struct mvebu_pcie_port;
+
+/* Structure representing all PCIe interfaces */
+struct mvebu_pcie {
+ struct platform_device *pdev;
+ struct mvebu_pcie_port *ports;
+ struct resource io;
+ struct resource realio;
+ struct resource mem;
+ struct resource busn;
+ int nports;
+};
+
+/* Structure representing one PCIe interface */
+struct mvebu_pcie_port {
+ char *name;
+ void __iomem *base;
+ spinlock_t conf_lock;
+ int haslink;
+ u32 port;
+ u32 lane;
+ int devfn;
+ struct clk *clk;
+ struct mvebu_sw_pci_bridge bridge;
+ struct device_node *dn;
+ struct mvebu_pcie *pcie;
+ phys_addr_t memwin_base;
+ size_t memwin_size;
+ phys_addr_t iowin_base;
+ size_t iowin_size;
+};
+
+static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
+{
+ return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
+}
+
+static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
+{
+ u32 stat;
+
+ stat = readl(port->base + PCIE_STAT_OFF);
+ stat &= ~PCIE_STAT_BUS;
+ stat |= nr << 8;
+ writel(stat, port->base + PCIE_STAT_OFF);
+}
+
+/*
+ * Setup PCIE BARs and Address Decode Wins:
+ * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
+ * WIN[0-3] -> DRAM bank[0-3]
+ */
+static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
+{
+ const struct mbus_dram_target_info *dram;
+ u32 size;
+ int i;
+
+ dram = mv_mbus_dram_info();
+
+ /* First, disable and clear BARs and windows. */
+ for (i = 1; i < 3; i++) {
+ writel(0, port->base + PCIE_BAR_CTRL_OFF(i));
+ writel(0, port->base + PCIE_BAR_LO_OFF(i));
+ writel(0, port->base + PCIE_BAR_HI_OFF(i));
+ }
+
+ for (i = 0; i < 5; i++) {
+ writel(0, port->base + PCIE_WIN04_CTRL_OFF(i));
+ writel(0, port->base + PCIE_WIN04_BASE_OFF(i));
+ writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
+ }
+
+ writel(0, port->base + PCIE_WIN5_CTRL_OFF);
+ writel(0, port->base + PCIE_WIN5_BASE_OFF);
+ writel(0, port->base + PCIE_WIN5_REMAP_OFF);
+
+ /* Setup windows for DDR banks. Count total DDR size on the fly. */
+ size = 0;
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ writel(cs->base & 0xffff0000,
+ port->base + PCIE_WIN04_BASE_OFF(i));
+ writel(0, port->base + PCIE_WIN04_REMAP_OFF(i));
+ writel(((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ port->base + PCIE_WIN04_CTRL_OFF(i));
+
+ size += cs->size;
+ }
+
+ /* Round up 'size' to the nearest power of two. */
+ if ((size & (size - 1)) != 0)
+ size = 1 << fls(size);
+
+ /* Setup BAR[1] to all DRAM banks. */
+ writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1));
+ writel(0, port->base + PCIE_BAR_HI_OFF(1));
+ writel(((size - 1) & 0xffff0000) | 1,
+ port->base + PCIE_BAR_CTRL_OFF(1));
+}
+
+static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
+{
+ u16 cmd;
+ u32 mask;
+
+ /* Point PCIe unit MBUS decode windows to DRAM space. */
+ mvebu_pcie_setup_wins(port);
+
+ /* Master + slave enable. */
+ cmd = readw(port->base + PCIE_CMD_OFF);
+ cmd |= PCI_COMMAND_IO;
+ cmd |= PCI_COMMAND_MEMORY;
+ cmd |= PCI_COMMAND_MASTER;
+ writew(cmd, port->base + PCIE_CMD_OFF);
+
+ /* Enable interrupt lines A-D. */
+ mask = readl(port->base + PCIE_MASK_OFF);
+ mask |= PCIE_MASK_ENABLE_INTS;
+ writel(mask, port->base + PCIE_MASK_OFF);
+}
+
+static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
+ struct pci_bus *bus,
+ u32 devfn, int where, int size, u32 *val)
+{
+ writel(PCIE_CONF_ADDR(bus->number, devfn, where),
+ port->base + PCIE_CONF_ADDR_OFF);
+
+ *val = readl(port->base + PCIE_CONF_DATA_OFF);
+
+ if (size == 1)
+ *val = (*val >> (8 * (where & 3))) & 0xff;
+ else if (size == 2)
+ *val = (*val >> (8 * (where & 3))) & 0xffff;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
+ struct pci_bus *bus,
+ u32 devfn, int where, int size, u32 val)
+{
+ int ret = PCIBIOS_SUCCESSFUL;
+
+ writel(PCIE_CONF_ADDR(bus->number, devfn, where),
+ port->base + PCIE_CONF_ADDR_OFF);
+
+ if (size == 4)
+ writel(val, port->base + PCIE_CONF_DATA_OFF);
+ else if (size == 2)
+ writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
+ else if (size == 1)
+ writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3));
+ else
+ ret = PCIBIOS_BAD_REGISTER_NUMBER;
+
+ return ret;
+}
+
+static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
+{
+ phys_addr_t iobase;
+
+ /* Are the new iobase/iolimit values invalid? */
+ if (port->bridge.iolimit < port->bridge.iobase ||
+ port->bridge.iolimitupper < port->bridge.iobaseupper) {
+
+ /* If a window was configured, remove it */
+ if (port->iowin_base) {
+ mvebu_mbus_del_window(port->iowin_base,
+ port->iowin_size);
+ port->iowin_base = 0;
+ port->iowin_size = 0;
+ }
+
+ return;
+ }
+
+ /*
+ * We read the PCI-to-PCI bridge emulated registers, and
+ * calculate the base address and size of the address decoding
+ * window to setup, according to the PCI-to-PCI bridge
+ * specifications. iobase is the bus address, port->iowin_base
+ * is the CPU address.
+ */
+ iobase = ((port->bridge.iobase & 0xF0) << 8) |
+ (port->bridge.iobaseupper << 16);
+ port->iowin_base = port->pcie->io.start + iobase;
+ port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
+ (port->bridge.iolimitupper << 16)) -
+ iobase);
+
+ mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base,
+ port->iowin_size,
+ iobase,
+ MVEBU_MBUS_PCI_IO);
+
+ pci_ioremap_io(iobase, port->iowin_base);
+}
+
+static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
+{
+ /* Are the new membase/memlimit values invalid? */
+ if (port->bridge.memlimit < port->bridge.membase) {
+
+ /* If a window was configured, remove it */
+ if (port->memwin_base) {
+ mvebu_mbus_del_window(port->memwin_base,
+ port->memwin_size);
+ port->memwin_base = 0;
+ port->memwin_size = 0;
+ }
+
+ return;
+ }
+
+ /*
+ * We read the PCI-to-PCI bridge emulated registers, and
+ * calculate the base address and size of the address decoding
+ * window to setup, according to the PCI-to-PCI bridge
+ * specifications.
+ */
+ port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16);
+ port->memwin_size =
+ (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
+ port->memwin_base;
+
+ mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base,
+ port->memwin_size,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+}
+
+/*
+ * Initialize the configuration space of the PCI-to-PCI bridge
+ * associated with the given PCIe interface.
+ */
+static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
+{
+ struct mvebu_sw_pci_bridge *bridge = &port->bridge;
+
+ memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge));
+
+ bridge->status = PCI_STATUS_CAP_LIST;
+ bridge->class = PCI_CLASS_BRIDGE_PCI;
+ bridge->vendor = PCI_VENDOR_ID_MARVELL;
+ bridge->device = MARVELL_EMULATED_PCI_PCI_BRIDGE_ID;
+ bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
+ bridge->cache_line_size = 0x10;
+
+ /* We support 32 bits I/O addressing */
+ bridge->iobase = PCI_IO_RANGE_TYPE_32;
+ bridge->iolimit = PCI_IO_RANGE_TYPE_32;
+}
+
+/*
+ * Read the configuration space of the PCI-to-PCI bridge associated to
+ * the given PCIe interface.
+ */
+static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
+ unsigned int where, int size, u32 *value)
+{
+ struct mvebu_sw_pci_bridge *bridge = &port->bridge;
+
+ switch (where & ~3) {
+ case PCI_VENDOR_ID:
+ *value = bridge->device << 16 | bridge->vendor;
+ break;
+
+ case PCI_COMMAND:
+ *value = bridge->status << 16 | bridge->command;
+ break;
+
+ case PCI_CLASS_REVISION:
+ *value = bridge->class << 16 | bridge->interface << 8 |
+ bridge->revision;
+ break;
+
+ case PCI_CACHE_LINE_SIZE:
+ *value = bridge->bist << 24 | bridge->header_type << 16 |
+ bridge->latency_timer << 8 | bridge->cache_line_size;
+ break;
+
+ case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
+ *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4];
+ break;
+
+ case PCI_PRIMARY_BUS:
+ *value = (bridge->secondary_latency_timer << 24 |
+ bridge->subordinate_bus << 16 |
+ bridge->secondary_bus << 8 |
+ bridge->primary_bus);
+ break;
+
+ case PCI_IO_BASE:
+ *value = (bridge->secondary_status << 16 |
+ bridge->iolimit << 8 |
+ bridge->iobase);
+ break;
+
+ case PCI_MEMORY_BASE:
+ *value = (bridge->memlimit << 16 | bridge->membase);
+ break;
+
+ case PCI_PREF_MEMORY_BASE:
+ *value = (bridge->prefmemlimit << 16 | bridge->prefmembase);
+ break;
+
+ case PCI_PREF_BASE_UPPER32:
+ *value = bridge->prefbaseupper;
+ break;
+
+ case PCI_PREF_LIMIT_UPPER32:
+ *value = bridge->preflimitupper;
+ break;
+
+ case PCI_IO_BASE_UPPER16:
+ *value = (bridge->iolimitupper << 16 | bridge->iobaseupper);
+ break;
+
+ case PCI_ROM_ADDRESS1:
+ *value = 0;
+ break;
+
+ default:
+ *value = 0xffffffff;
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ if (size == 2)
+ *value = (*value >> (8 * (where & 3))) & 0xffff;
+ else if (size == 1)
+ *value = (*value >> (8 * (where & 3))) & 0xff;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* Write to the PCI-to-PCI bridge configuration space */
+static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
+ unsigned int where, int size, u32 value)
+{
+ struct mvebu_sw_pci_bridge *bridge = &port->bridge;
+ u32 mask, reg;
+ int err;
+
+ if (size == 4)
+ mask = 0x0;
+ else if (size == 2)
+ mask = ~(0xffff << ((where & 3) * 8));
+ else if (size == 1)
+ mask = ~(0xff << ((where & 3) * 8));
+ else
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, ®);
+ if (err)
+ return err;
+
+ value = (reg & mask) | value << ((where & 3) * 8);
+
+ switch (where & ~3) {
+ case PCI_COMMAND:
+ bridge->command = value & 0xffff;
+ bridge->status = value >> 16;
+ break;
+
+ case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
+ bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value;
+ break;
+
+ case PCI_IO_BASE:
+ /*
+ * We also keep bit 1 set, it is a read-only bit that
+ * indicates we support 32 bits addressing for the
+ * I/O
+ */
+ bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32;
+ bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32;
+ bridge->secondary_status = value >> 16;
+ mvebu_pcie_handle_iobase_change(port);
+ break;
+
+ case PCI_MEMORY_BASE:
+ bridge->membase = value & 0xffff;
+ bridge->memlimit = value >> 16;
+ mvebu_pcie_handle_membase_change(port);
+ break;
+
+ case PCI_PREF_MEMORY_BASE:
+ bridge->prefmembase = value & 0xffff;
+ bridge->prefmemlimit = value >> 16;
+ break;
+
+ case PCI_PREF_BASE_UPPER32:
+ bridge->prefbaseupper = value;
+ break;
+
+ case PCI_PREF_LIMIT_UPPER32:
+ bridge->preflimitupper = value;
+ break;
+
+ case PCI_IO_BASE_UPPER16:
+ bridge->iobaseupper = value & 0xffff;
+ bridge->iolimitupper = value >> 16;
+ mvebu_pcie_handle_iobase_change(port);
+ break;
+
+ case PCI_PRIMARY_BUS:
+ bridge->primary_bus = value & 0xff;
+ bridge->secondary_bus = (value >> 8) & 0xff;
+ bridge->subordinate_bus = (value >> 16) & 0xff;
+ bridge->secondary_latency_timer = (value >> 24) & 0xff;
+ mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus);
+ break;
+
+ default:
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
+{
+ return sys->private_data;
+}
+
+static struct mvebu_pcie_port *
+mvebu_pcie_find_port(struct mvebu_pcie *pcie, struct pci_bus *bus,
+ int devfn)
+{
+ int i;
+
+ for (i = 0; i < pcie->nports; i++) {
+ struct mvebu_pcie_port *port = &pcie->ports[i];
+ if (bus->number == 0 && port->devfn == devfn)
+ return port;
+ if (bus->number != 0 &&
+ port->bridge.secondary_bus == bus->number)
+ return port;
+ }
+
+ return NULL;
+}
+
+/* PCI configuration space write function */
+static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
+ struct mvebu_pcie_port *port;
+ unsigned long flags;
+ int ret;
+
+ port = mvebu_pcie_find_port(pcie, bus, devfn);
+ if (!port)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Access the emulated PCI-to-PCI bridge */
+ if (bus->number == 0)
+ return mvebu_sw_pci_bridge_write(port, where, size, val);
+
+ if (!port->haslink || PCI_SLOT(devfn) != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Access the real PCIe interface */
+ spin_lock_irqsave(&port->conf_lock, flags);
+ ret = mvebu_pcie_hw_wr_conf(port, bus,
+ PCI_DEVFN(1, PCI_FUNC(devfn)),
+ where, size, val);
+ spin_unlock_irqrestore(&port->conf_lock, flags);
+
+ return ret;
+}
+
+/* PCI configuration space read function */
+static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
+ struct mvebu_pcie_port *port;
+ unsigned long flags;
+ int ret;
+
+ port = mvebu_pcie_find_port(pcie, bus, devfn);
+ if (!port) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /* Access the emulated PCI-to-PCI bridge */
+ if (bus->number == 0)
+ return mvebu_sw_pci_bridge_read(port, where, size, val);
+
+ if (!port->haslink || PCI_SLOT(devfn) != 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /* Access the real PCIe interface */
+ spin_lock_irqsave(&port->conf_lock, flags);
+ ret = mvebu_pcie_hw_rd_conf(port, bus,
+ PCI_DEVFN(1, PCI_FUNC(devfn)),
+ where, size, val);
+ spin_unlock_irqrestore(&port->conf_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops mvebu_pcie_ops = {
+ .read = mvebu_pcie_rd_conf,
+ .write = mvebu_pcie_wr_conf,
+};
+
+static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct mvebu_pcie *pcie = sys_to_pcie(sys);
+ int i;
+
+ pci_add_resource_offset(&sys->resources, &pcie->realio, sys->io_offset);
+ pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
+ pci_add_resource(&sys->resources, &pcie->busn);
+
+ for (i = 0; i < pcie->nports; i++) {
+ struct mvebu_pcie_port *port = &pcie->ports[i];
+ mvebu_pcie_setup_hw(port);
+ }
+
+ return 1;
+}
+
+static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct of_irq oirq;
+ int ret;
+
+ ret = of_irq_map_pci(dev, &oirq);
+ if (ret)
+ return ret;
+
+ return irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+}
+
+static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct mvebu_pcie *pcie = sys_to_pcie(sys);
+ struct pci_bus *bus;
+
+ bus = pci_create_root_bus(&pcie->pdev->dev, sys->busnr,
+ &mvebu_pcie_ops, sys, &sys->resources);
+ if (!bus)
+ return NULL;
+
+ pci_scan_child_bus(bus);
+
+ return bus;
+}
+
+resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
+ const struct resource *res,
+ resource_size_t start,
+ resource_size_t size,
+ resource_size_t align)
+{
+ if (dev->bus->number != 0)
+ return start;
+
+ /*
+ * On the PCI-to-PCI bridge side, the I/O windows must have at
+ * least a 64 KB size and be aligned on their size, and the
+ * memory windows must have at least a 1 MB size and be
+ * aligned on their size
+ */
+ if (res->flags & IORESOURCE_IO)
+ return round_up(start, max((resource_size_t)SZ_64K, size));
+ else if (res->flags & IORESOURCE_MEM)
+ return round_up(start, max((resource_size_t)SZ_1M, size));
+ else
+ return start;
+}
+
+static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie)
+{
+ struct hw_pci hw;
+
+ memset(&hw, 0, sizeof(hw));
+
+ hw.nr_controllers = 1;
+ hw.private_data = (void **)&pcie;
+ hw.setup = mvebu_pcie_setup;
+ hw.scan = mvebu_pcie_scan_bus;
+ hw.map_irq = mvebu_pcie_map_irq;
+ hw.ops = &mvebu_pcie_ops;
+ hw.align_resource = mvebu_pcie_align_resource;
+
+ pci_common_init(&hw);
+}
+
+/*
+ * Looks up the list of register addresses encoded into the reg =
+ * <...> property for one that matches the given port/lane. Once
+ * found, maps it.
+ */
+static void __iomem * __init
+mvebu_pcie_map_registers(struct platform_device *pdev,
+ struct device_node *np,
+ struct mvebu_pcie_port *port)
+{
+ struct resource regs;
+ int ret = 0;
+
+ ret = of_address_to_resource(np, 0, ®s);
+ if (ret)
+ return NULL;
+
+ return devm_request_and_ioremap(&pdev->dev, ®s);
+}
+
+static int __init mvebu_pcie_probe(struct platform_device *pdev)
+{
+ struct mvebu_pcie *pcie;
+ struct device_node *np = pdev->dev.of_node;
+ struct of_pci_range range;
+ struct of_pci_range_parser parser;
+ struct device_node *child;
+ int i, ret;
+
+ pcie = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_pcie),
+ GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ pcie->pdev = pdev;
+
+ if (of_pci_range_parser_init(&parser, np))
+ return -EINVAL;
+
+ /* Get the I/O and memory ranges from DT */
+ for_each_of_pci_range(&parser, &range) {
+ unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
+ if (restype == IORESOURCE_IO) {
+ of_pci_range_to_resource(&range, np, &pcie->io);
+ of_pci_range_to_resource(&range, np, &pcie->realio);
+ pcie->io.name = "I/O";
+ pcie->realio.start = max_t(resource_size_t,
+ PCIBIOS_MIN_IO,
+ range.pci_addr);
+ pcie->realio.end = min_t(resource_size_t,
+ IO_SPACE_LIMIT,
+ range.pci_addr + range.size);
+ }
+ if (restype == IORESOURCE_MEM) {
+ of_pci_range_to_resource(&range, np, &pcie->mem);
+ pcie->mem.name = "MEM";
+ }
+ }
+
+ /* Get the bus range */
+ ret = of_pci_parse_bus_range(np, &pcie->busn);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
+ ret);
+ return ret;
+ }
+
+ for_each_child_of_node(pdev->dev.of_node, child) {
+ if (!of_device_is_available(child))
+ continue;
+ pcie->nports++;
+ }
+
+ pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports *
+ sizeof(struct mvebu_pcie_port),
+ GFP_KERNEL);
+ if (!pcie->ports)
+ return -ENOMEM;
+
+ i = 0;
+ for_each_child_of_node(pdev->dev.of_node, child) {
+ struct mvebu_pcie_port *port = &pcie->ports[i];
+
+ if (!of_device_is_available(child))
+ continue;
+
+ port->pcie = pcie;
+
+ if (of_property_read_u32(child, "marvell,pcie-port",
+ &port->port)) {
+ dev_warn(&pdev->dev,
+ "ignoring PCIe DT node, missing pcie-port property\n");
+ continue;
+ }
+
+ if (of_property_read_u32(child, "marvell,pcie-lane",
+ &port->lane))
+ port->lane = 0;
+
+ port->name = kasprintf(GFP_KERNEL, "pcie%d.%d",
+ port->port, port->lane);
+
+ port->devfn = of_pci_get_devfn(child);
+ if (port->devfn < 0)
+ continue;
+
+ port->base = mvebu_pcie_map_registers(pdev, child, port);
+ if (!port->base) {
+ dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",
+ port->port, port->lane);
+ continue;
+ }
+
+ if (mvebu_pcie_link_up(port)) {
+ port->haslink = 1;
+ dev_info(&pdev->dev, "PCIe%d.%d: link up\n",
+ port->port, port->lane);
+ } else {
+ port->haslink = 0;
+ dev_info(&pdev->dev, "PCIe%d.%d: link down\n",
+ port->port, port->lane);
+ }
+
+ port->clk = of_clk_get_by_name(child, NULL);
+ if (!port->clk) {
+ dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n",
+ port->port, port->lane);
+ iounmap(port->base);
+ port->haslink = 0;
+ continue;
+ }
+
+ port->dn = child;
+
+ clk_prepare_enable(port->clk);
+ spin_lock_init(&port->conf_lock);
+
+ mvebu_sw_pci_bridge_init(port);
+
+ i++;
+ }
+
+ mvebu_pcie_enable(pcie);
+
+ return 0;
+}
+
+static const struct of_device_id mvebu_pcie_of_match_table[] = {
+ { .compatible = "marvell,armada-xp-pcie", },
+ { .compatible = "marvell,armada-370-pcie", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
+
+static struct platform_driver mvebu_pcie_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mvebu-pcie",
+ .of_match_table =
+ of_match_ptr(mvebu_pcie_of_match_table),
+ },
+};
+
+static int __init mvebu_pcie_init(void)
+{
+ return platform_driver_probe(&mvebu_pcie_driver,
+ mvebu_pcie_probe);
+}
+
+subsys_initcall(mvebu_pcie_init);
+
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>");
+MODULE_DESCRIPTION("Marvell EBU PCIe driver");
+MODULE_LICENSE("GPLv2");
OSDN Git Service
