$1=[$]_gas_uniq_newlist
])dnl
+sinclude(../libtool.m4)
+dnl The lines below arrange for aclocal not to bring libtool.m4
+dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[
+AC_DEFUN([AM_PROG_LIBTOOL],)
+AC_DEFUN([AC_CHECK_LIBM],)
+AC_SUBST(LIBTOOL)
+])
+
+sinclude(../gettext.m4)
+ifelse(yes,no,[
+AC_DEFUN([CY_WITH_NLS],)
+AC_SUBST(INTLLIBS)
+])
+
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
fi
AC_SUBST($1)])
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
- # Accept absolute paths.
-changequote(,)dnl
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
- break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$host" in
-*-*-beos* | *-*-cygwin*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case "$enable_ltdl_convenience" in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'. Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
- fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
AC_PROG_LEX
AC_DECL_YYTEXT])
-# This file is derived from `gettext.m4'. The difference is that the
-# included macros assume Cygnus-style source and build trees.
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file file be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 3
-
-AC_DEFUN(CY_WITH_NLS,
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE(nls,
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT($USE_NLS)
- AC_SUBST(USE_NLS)
-
- USE_INCLUDED_LIBINTL=no
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH(included-gettext,
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If gettext or catgets are available (in this order) we
- dnl use this. Else we have to fall back to GNU NLS library.
- dnl catgets is only used if permitted by option --with-catgets.
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
-
- AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
- [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
- gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- AC_CHECK_LIB(intl, bindtextdomain,
- [AC_CACHE_CHECK([for gettext in libintl],
- gt_cv_func_gettext_libintl,
- [AC_TRY_LINK([], [return (int) gettext ("")],
- gt_cv_func_gettext_libintl=yes,
- gt_cv_func_gettext_libintl=no)])])
- fi
-
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
- AC_DEFINE(HAVE_GETTEXT, 1,
- [Define as 1 if you have gettext and don't want to use GNU gettext.])
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
- if test "$MSGFMT" != "no"; then
- AC_CHECK_FUNCS(dcgettext)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr],
- [CATOBJEXT=.gmo
- DATADIRNAME=share],
- [CATOBJEXT=.mo
- DATADIRNAME=lib])
- INSTOBJEXT=.mo
- fi
- fi
- ])
-
- dnl In the standard gettext, we would now check for catgets.
- dnl However, we never want to use catgets for our releases.
-
- if test "$CATOBJEXT" = "NONE"; then
- dnl Neither gettext nor catgets in included in the C library.
- dnl Fall back on GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- INTLOBJS="\$(GETTOBJS)"
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_SUBST(MSGFMT)
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS='$(top_builddir)/../intl/libintl.a'
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=libintl.h
- nls_cv_header_libgt=libgettext.h
- fi
-
- dnl Test whether we really found GNU xgettext.
- if test "$XGETTEXT" != ":"; then
- dnl If it is no GNU xgettext we define it as : so that the
- dnl Makefiles still can work.
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
- : ;
- else
- AC_MSG_RESULT(
- [found xgettext programs is not GNU xgettext; ignore it])
- XGETTEXT=":"
- fi
- fi
-
- # We need to process the po/ directory.
- POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=libintl.h
- nls_cv_header_libgt=libgettext.h
- fi
-
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
- if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
- fi
-
- dnl These rules are solely for the distribution goal. While doing this
- dnl we only have to keep exactly one list of the available catalogs
- dnl in configure.in.
- for lang in $ALL_LINGUAS; do
- GMOFILES="$GMOFILES $lang.gmo"
- POFILES="$POFILES $lang.po"
- done
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST(USE_INCLUDED_LIBINTL)
- AC_SUBST(CATALOGS)
- AC_SUBST(CATOBJEXT)
- AC_SUBST(DATADIRNAME)
- AC_SUBST(GMOFILES)
- AC_SUBST(INSTOBJEXT)
- AC_SUBST(INTLDEPS)
- AC_SUBST(INTLLIBS)
- AC_SUBST(INTLOBJS)
- AC_SUBST(POFILES)
- AC_SUBST(POSUB)
- ])
-
-AC_DEFUN(CY_GNU_GETTEXT,
- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_PROG_RANLIB])dnl
- AC_REQUIRE([AC_ISC_POSIX])dnl
- AC_REQUIRE([AC_HEADER_STDC])dnl
- AC_REQUIRE([AC_C_CONST])dnl
- AC_REQUIRE([AC_C_INLINE])dnl
- AC_REQUIRE([AC_TYPE_OFF_T])dnl
- AC_REQUIRE([AC_TYPE_SIZE_T])dnl
- AC_REQUIRE([AC_FUNC_ALLOCA])dnl
- AC_REQUIRE([AC_FUNC_MMAP])dnl
-
- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h values.h sys/param.h])
- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
- AC_CHECK_FUNCS(stpcpy)
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
- AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
- fi
-
- AM_LC_MESSAGES
- CY_WITH_NLS
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
- AC_MSG_CHECKING(for catalogs to be installed)
- NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
- AC_MSG_RESULT($LINGUAS)
- fi
-
- dnl Construct list of names of catalog files to be constructed.
- if test -n "$LINGUAS"; then
- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
- fi
- fi
-
- dnl The reference to <locale.h> in the installed <libintl.h> file
- dnl must be resolved because we cannot expect the users of this
- dnl to define HAVE_LOCALE_H.
- if test $ac_cv_header_locale_h = yes; then
- INCLUDE_LOCALE_H="#include <locale.h>"
- else
- INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>. Take care yourself. */"
- fi
- AC_SUBST(INCLUDE_LOCALE_H)
-
- dnl Determine which catalog format we have (if any is needed)
- dnl For now we know about two different formats:
- dnl Linux libc-5 and the normal X/Open format
- if test -f $srcdir/po2tbl.sed.in; then
- if test "$CATOBJEXT" = ".cat"; then
- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
- dnl Transform the SED scripts while copying because some dumb SEDs
- dnl cannot handle comments.
- sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
- fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/po2tbl.sed.in > po2tbl.sed
- fi
-
- dnl In the intl/Makefile.in we have a special dependency which makes
- dnl only sense for gettext. We comment this out for non-gettext
- dnl packages.
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
- AC_SUBST(GT_NO)
- AC_SUBST(GT_YES)
-
- MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
- AC_SUBST(MKINSTALLDIRS)
-
- dnl *** For now the libtool support in intl/Makefile is not for real.
- l=
- AC_SUBST(l)
-
- dnl Generate list of files to be processed by xgettext which will
- dnl be included in po/Makefile. But only do this if the po directory
- dnl exists in srcdir.
- if test -d $srcdir/po; then
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
- fi
- rm -f po/POTFILES
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
- fi
- ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-#
-# This file file be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
- /*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
- AC_MSG_RESULT([$]$1)
-else
- AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file file be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
- [if test $ac_cv_header_locale_h = yes; then
- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
- if test $am_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES, 1,
- [Define if your locale.h file contains LC_MESSAGES.])
- fi
- fi])
-
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering
ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
+ac_help="$ac_help
--enable-bfd-assembler use BFD back end for writing object files"
ac_help="$ac_help
targets alternative target configurations besides the primary"
ac_n= ac_c='\c' ac_t=
fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:552: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 557 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:585: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 590 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
ac_aux_dir=
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:598: checking host system type" >&5
+echo "configure:662: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:619: checking target system type" >&5
+echo "configure:683: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:637: checking build system type" >&5
+echo "configure:701: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:672: checking for a BSD compatible install" >&5
+echo "configure:736: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:725: checking whether build environment is sane" >&5
+echo "configure:789: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:782: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:846: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:828: checking for working aclocal" >&5
+echo "configure:892: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:841: checking for working autoconf" >&5
+echo "configure:905: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:854: checking for working automake" >&5
+echo "configure:918: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:867: checking for working autoheader" >&5
+echo "configure:931: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:880: checking for working makeinfo" >&5
+echo "configure:944: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
enable_fast_install=yes
fi
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:966: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:996: checking for $ac_word" >&5
+echo "configure:1030: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1026: checking for $ac_word" >&5
+echo "configure:1060: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1077: checking for $ac_word" >&5
+echo "configure:1111: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1109: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1143: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1120 "configure"
+#line 1154 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1151: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1185: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1156: checking whether we are using GNU C" >&5
+echo "configure:1190: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1199: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1184: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1227: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
+echo "configure:1261: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
case "$ac_prog" in
# Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*)
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1251: checking for GNU ld" >&5
+echo "configure:1291: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1254: checking for non-GNU ld" >&5
+echo "configure:1294: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1289: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1329: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$ac_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1346: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1305: checking for BSD-compatible nm" >&5
+echo "configure:1358: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$tmp_nm -B"
break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$tmp_nm -p"
break
else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ ac_cv_path_NM=${ac_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1341: checking whether ln -s works" >&5
+echo "configure:1395: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1416: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='${MAGIC}'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case "$host_os" in
+aix4*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='${OBJDUMP} -f'
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case "$host_cpu" in
+ i*86 )
+ lt_cv_deplibs_check_method=='file_magic OpenBSD/i[3-9]86 demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*)
+ # TODO: Does this work for hpux-11 too?
+ lt_cv_deplibs_check_method='file_magic (s0-90-90-9|PA-RISC0-9.0-9) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case "$host_os" in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case "$LD" in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux*)
+ case "$host_cpu" in
+ alpha* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then :
+ else
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case "$host_vendor" in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1557: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1563: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1583: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case "$deplibs_check_method" in
+file_magic*)
+ if test "$file_magic_cmd" = '${MAGIC}'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1626: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MAGIC" in
+ /*)
+ lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC="$MAGIC"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC="$lt_cv_path_MAGIC"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC="$ac_save_MAGIC"
+ ;;
+esac
+fi
+
+MAGIC="$lt_cv_path_MAGIC"
+if test -n "$MAGIC"; then
+ echo "$ac_t""$MAGIC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1688: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$MAGIC" in
+ /*)
+ lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC="$MAGIC"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case "$deplibs_check_method" in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC="$lt_cv_path_MAGIC"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC="$ac_save_MAGIC"
+ ;;
+esac
+fi
+
+MAGIC="$lt_cv_path_MAGIC"
+if test -n "$MAGIC"; then
+ echo "$ac_t""$MAGIC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ MAGIC=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1759: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1791: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ RANLIB=":"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1826: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1858: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ STRIP=":"
+fi
+fi
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1385 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1386: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1925 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1407: checking whether the C compiler needs -belf" >&5
+echo "configure:1947: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1412 "configure"
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 1960 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
lt_cv_cc_needs_belf=no
fi
rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC="$MAGIC" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
exec 5>>./config.log
+
+
+
+
+
user_bfd_gas=
# Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
if test "${enable_bfd_assembler+set}" = set; then
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2441: checking for $ac_word" >&5
+echo "configure:3003: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2471: checking for $ac_word" >&5
+echo "configure:3033: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2522: checking for $ac_word" >&5
+echo "configure:3084: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2554: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:3116: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2565 "configure"
+#line 3127 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2596: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:3158: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2601: checking whether we are using GNU C" >&5
+echo "configure:3163: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2610: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2629: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:3191: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2666: checking for $ac_word" >&5
+echo "configure:3228: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$YACC" || YACC="yacc"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2697: checking how to run the C preprocessor" >&5
+echo "configure:3259: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2712 "configure"
+#line 3274 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2718: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3280: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2729 "configure"
+#line 3291 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3297: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2746 "configure"
+#line 3308 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2752: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2782: checking for $ac_word" >&5
+echo "configure:3344: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2815: checking for $ac_word" >&5
+echo "configure:3377: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:2849: checking for yywrap in -l$ac_lib" >&5
+echo "configure:3411: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2857 "configure"
+#line 3419 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:2868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:2891: checking lex output file root" >&5
+echo "configure:3453: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2912: checking whether yytext is a pointer" >&5
+echo "configure:3474: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 2924 "configure"
+#line 3486 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:2931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
ALL_LINGUAS=
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3519: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:2955: checking for POSIXized ISC" >&5
+echo "configure:3547: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2976: checking for ANSI C header files" >&5
+echo "configure:3568: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2981 "configure"
+#line 3573 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3581: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 3006 "configure"
+#line 3598 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 3024 "configure"
+#line 3616 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 3045 "configure"
+#line 3637 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:3056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3080: checking for working const" >&5
+echo "configure:3672: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3085 "configure"
+#line 3677 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:3134: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3726: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3155: checking for inline" >&5
+echo "configure:3747: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 3162 "configure"
+#line 3754 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:3169: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3195: checking for off_t" >&5
+echo "configure:3787: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3200 "configure"
+#line 3792 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3228: checking for size_t" >&5
+echo "configure:3820: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3233 "configure"
+#line 3825 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:3263: checking for working alloca.h" >&5
+echo "configure:3855: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3268 "configure"
+#line 3860 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:3275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3867: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:3296: checking for alloca" >&5
+echo "configure:3888: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3301 "configure"
+#line 3893 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:3329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:3361: checking whether alloca needs Cray hooks" >&5
+echo "configure:3953: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3366 "configure"
+#line 3958 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3391: checking for $ac_func" >&5
+echo "configure:3983: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3396 "configure"
+#line 3988 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3446: checking stack direction for C alloca" >&5
+echo "configure:4038: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3454 "configure"
+#line 4046 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3473: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4065: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3498: checking for $ac_hdr" >&5
+echo "configure:4090: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3503 "configure"
+#line 4095 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3508: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4100: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3537: checking for $ac_func" >&5
+echo "configure:4129: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3542 "configure"
+#line 4134 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3590: checking for working mmap" >&5
+echo "configure:4182: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3598 "configure"
+#line 4190 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3738: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3766: checking for $ac_hdr" >&5
+echo "configure:4358: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3771 "configure"
+#line 4363 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3776: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4368: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3806: checking for $ac_func" >&5
+echo "configure:4398: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3811 "configure"
+#line 4403 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3863: checking for $ac_func" >&5
+echo "configure:4455: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3868 "configure"
+#line 4460 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3925: checking for LC_MESSAGES" >&5
+echo "configure:4517: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3930 "configure"
+#line 4522 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3958: checking whether NLS is requested" >&5
+echo "configure:4550: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3978: checking whether included gettext is requested" >&5
+echo "configure:4570: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3997: checking for libintl.h" >&5
+echo "configure:4589: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4002 "configure"
+#line 4594 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4599: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4024: checking for gettext in libc" >&5
+echo "configure:4616: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4029 "configure"
+#line 4621 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4628: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4052: checking for bindtextdomain in -lintl" >&5
+echo "configure:4644: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4060 "configure"
+#line 4652 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:4071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4087: checking for gettext in libintl" >&5
+echo "configure:4679: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4092 "configure"
+#line 4684 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:4099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4127: checking for $ac_word" >&5
+echo "configure:4719: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4161: checking for $ac_func" >&5
+echo "configure:4753: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4166 "configure"
+#line 4758 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4189: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4216: checking for $ac_word" >&5
+echo "configure:4808: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4252: checking for $ac_word" >&5
+echo "configure:4844: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 4284 "configure"
+#line 4876 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:4292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4324: checking for $ac_word" >&5
+echo "configure:4916: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4358: checking for $ac_word" >&5
+echo "configure:4950: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4394: checking for $ac_word" >&5
+echo "configure:4986: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4484: checking for catalogs to be installed" >&5
+echo "configure:5076: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4512: checking for linux/version.h" >&5
+echo "configure:5104: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4517 "configure"
+#line 5109 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4522: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4585: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:5177: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
MAINT=$MAINTAINER_MODE_TRUE
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4608: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4613 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:4624: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_cygwin=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4641: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4646 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:4653: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_mingw32=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:4672: checking for executable suffix" >&5
+echo "configure:5202: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:4682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:5212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4707: checking for $ac_hdr" >&5
+echo "configure:5237: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4712 "configure"
+#line 5242 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4717: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5247: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:4747: checking whether compiling a cross-assembler" >&5
+echo "configure:5277: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4762: checking for working alloca.h" >&5
+echo "configure:5292: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4767 "configure"
+#line 5297 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:4774: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:4795: checking for alloca" >&5
+echo "configure:5325: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4800 "configure"
+#line 5330 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:4828: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:4860: checking whether alloca needs Cray hooks" >&5
+echo "configure:5390: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4865 "configure"
+#line 5395 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4890: checking for $ac_func" >&5
+echo "configure:5420: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4895 "configure"
+#line 5425 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:4945: checking stack direction for C alloca" >&5
+echo "configure:5475: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 4953 "configure"
+#line 5483 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:4972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:4994: checking for inline" >&5
+echo "configure:5524: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 5001 "configure"
+#line 5531 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:5008: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5538: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5038: checking for $ac_func" >&5
+echo "configure:5568: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5043 "configure"
+#line 5573 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5095: checking for $ac_func" >&5
+echo "configure:5625: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5100 "configure"
+#line 5630 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
;;
*-ncr-sysv4.3*)
echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6
-echo "configure:5158: checking for _mwvalidcheckl in -lmw" >&5
+echo "configure:5688: checking for _mwvalidcheckl in -lmw" >&5
ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmw $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5166 "configure"
+#line 5696 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
_mwvalidcheckl()
; return 0; }
EOF
-if { (eval echo configure:5177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:5198: checking for main in -lm" >&5
+echo "configure:5728: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5206 "configure"
+#line 5736 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:5213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
;;
*)
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:5236: checking for main in -lm" >&5
+echo "configure:5766: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5244 "configure"
+#line 5774 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:5251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:5282: checking for working assert macro" >&5
+echo "configure:5812: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5287 "configure"
+#line 5817 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:5303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:5344: checking whether declaration is required for strstr" >&5
+echo "configure:5874: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5349 "configure"
+#line 5879 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:5381: checking whether declaration is required for malloc" >&5
+echo "configure:5911: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5386 "configure"
+#line 5916 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:5418: checking whether declaration is required for free" >&5
+echo "configure:5948: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5423 "configure"
+#line 5953 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5434: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:5455: checking whether declaration is required for sbrk" >&5
+echo "configure:5985: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5460 "configure"
+#line 5990 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
-echo "configure:5492: checking whether declaration is required for environ" >&5
+echo "configure:6022: checking whether declaration is required for environ" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5497 "configure"
+#line 6027 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:5508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_environ=no
else
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:5532: checking whether declaration is required for errno" >&5
+echo "configure:6062: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5537 "configure"
+#line 6067 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
; return 0; }
EOF
-if { (eval echo configure:5552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
-s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
s%@WARN_CFLAGS@%$WARN_CFLAGS%g
s%@GDBINIT@%$GDBINIT%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
s%@LIBM@%$LIBM%g
CEOF
OSDN Git Service
