--- /dev/null
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL18XX_CONF_H__
+#define __WL18XX_CONF_H__
+
+struct wl18xx_conf_phy {
+ u8 phy_standalone;
+ u8 rdl;
+ u8 enable_clpc;
+ u8 enable_tx_low_pwr_on_siso_rdl;
+ u8 auto_detect;
+ u8 dedicated_fem;
+ u8 low_band_component;
+ u8 low_band_component_type;
+ u8 high_band_component;
+ u8 high_band_component_type;
+ u8 number_of_assembled_ant2_4;
+ u8 number_of_assembled_ant5;
+ u8 external_pa_dc2dc;
+ u8 tcxo_ldo_voltage;
+ u8 xtal_itrim_val;
+ u8 srf_state;
+ u8 io_configuration;
+ u8 sdio_configuration;
+ u8 settings;
+ u8 rx_profile;
+ u8 primary_clock_setting_time;
+ u8 clock_valid_on_wake_up;
+ u8 secondary_clock_setting_time;
+};
+
+struct wl18xx_conf {
+ /* TODO: move the wlcore conf here? */
+
+ struct wl18xx_conf_phy phy;
+};
+
+#endif /* __WL18XX_CONF_H__ */
#include "../wlcore/wlcore.h"
#include "../wlcore/debug.h"
+#include "../wlcore/io.h"
+#include "../wlcore/acx.h"
+#include "../wlcore/boot.h"
#include "reg.h"
+#include "conf.h"
+
+static struct wl18xx_conf wl18xx_default_conf = {
+ .phy = {
+ .phy_standalone = 0x00,
+ .primary_clock_setting_time = 0x05,
+ .clock_valid_on_wake_up = 0x00,
+ .secondary_clock_setting_time = 0x05,
+ .rdl = 0x01,
+ .auto_detect = 0x00,
+ .dedicated_fem = FEM_NONE,
+ .low_band_component = COMPONENT_2_WAY_SWITCH,
+ .low_band_component_type = 0x05,
+ .high_band_component = COMPONENT_2_WAY_SWITCH,
+ .high_band_component_type = 0x09,
+ .number_of_assembled_ant2_4 = 0x01,
+ .number_of_assembled_ant5 = 0x01,
+ .external_pa_dc2dc = 0x00,
+ .tcxo_ldo_voltage = 0x00,
+ .xtal_itrim_val = 0x04,
+ .srf_state = 0x00,
+ .io_configuration = 0x01,
+ .sdio_configuration = 0x00,
+ .settings = 0x00,
+ .enable_clpc = 0x00,
+ .enable_tx_low_pwr_on_siso_rdl = 0x00,
+ .rx_profile = 0x00,
+ },
+};
static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
[PART_TOP_PRCM_ELP_SOC] = {
return ret;
}
+static void wl18xx_set_clk(struct wl1271 *wl)
+{
+ /*
+ * TODO: this is hardcoded just for DVP/EVB, fix according to
+ * new unified_drv.
+ */
+ wl1271_write32(wl, WL18XX_SCR_PAD2, 0xB3);
+
+ wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+ wl1271_write32(wl, 0x00A02360, 0xD0078);
+ wl1271_write32(wl, 0x00A0236c, 0x12);
+ wl1271_write32(wl, 0x00A02390, 0x20118);
+}
+
+static void wl18xx_boot_soft_reset(struct wl1271 *wl)
+{
+ /* disable Rx/Tx */
+ wl1271_write32(wl, WL18XX_ENABLE, 0x0);
+
+ /* disable auto calibration on start*/
+ wl1271_write32(wl, WL18XX_SPARE_A2, 0xffff);
+}
+
+static int wl18xx_pre_boot(struct wl1271 *wl)
+{
+ /* TODO: add hw_pg_ver reading */
+
+ wl18xx_set_clk(wl);
+
+ /* Continue the ELP wake up sequence */
+ wl1271_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+ udelay(500);
+
+ wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+
+ /* Disable interrupts */
+ wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+
+ wl18xx_boot_soft_reset(wl);
+
+ return 0;
+}
+
+static void wl18xx_pre_upload(struct wl1271 *wl)
+{
+ u32 tmp;
+
+ wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
+
+ /* TODO: check if this is all needed */
+ wl1271_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND);
+
+ tmp = wlcore_read_reg(wl, REG_CHIP_ID_B);
+
+ wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
+
+ tmp = wl1271_read32(wl, WL18XX_SCR_PAD2);
+}
+
+static void wl18xx_set_mac_and_phy(struct wl1271 *wl)
+{
+ struct wl18xx_mac_and_phy_params params;
+
+ memset(¶ms, 0, sizeof(params));
+
+ params.phy_standalone = wl18xx_default_conf.phy.phy_standalone;
+ params.rdl = wl18xx_default_conf.phy.rdl;
+ params.enable_clpc = wl18xx_default_conf.phy.enable_clpc;
+ params.enable_tx_low_pwr_on_siso_rdl =
+ wl18xx_default_conf.phy.enable_tx_low_pwr_on_siso_rdl;
+ params.auto_detect = wl18xx_default_conf.phy.auto_detect;
+ params.dedicated_fem = wl18xx_default_conf.phy.dedicated_fem;
+ params.low_band_component = wl18xx_default_conf.phy.low_band_component;
+ params.low_band_component_type =
+ wl18xx_default_conf.phy.low_band_component_type;
+ params.high_band_component =
+ wl18xx_default_conf.phy.high_band_component;
+ params.high_band_component_type =
+ wl18xx_default_conf.phy.high_band_component_type;
+ params.number_of_assembled_ant2_4 =
+ wl18xx_default_conf.phy.number_of_assembled_ant2_4;
+ params.number_of_assembled_ant5 =
+ wl18xx_default_conf.phy.number_of_assembled_ant5;
+ params.external_pa_dc2dc = wl18xx_default_conf.phy.external_pa_dc2dc;
+ params.tcxo_ldo_voltage = wl18xx_default_conf.phy.tcxo_ldo_voltage;
+ params.xtal_itrim_val = wl18xx_default_conf.phy.xtal_itrim_val;
+ params.srf_state = wl18xx_default_conf.phy.srf_state;
+ params.io_configuration = wl18xx_default_conf.phy.io_configuration;
+ params.sdio_configuration = wl18xx_default_conf.phy.sdio_configuration;
+ params.settings = wl18xx_default_conf.phy.settings;
+ params.rx_profile = wl18xx_default_conf.phy.rx_profile;
+ params.primary_clock_setting_time =
+ wl18xx_default_conf.phy.primary_clock_setting_time;
+ params.clock_valid_on_wake_up =
+ wl18xx_default_conf.phy.clock_valid_on_wake_up;
+ params.secondary_clock_setting_time =
+ wl18xx_default_conf.phy.secondary_clock_setting_time;
+
+ /* TODO: hardcoded for now */
+ params.board_type = BOARD_TYPE_DVP_EVB_18XX;
+
+ wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
+ wl1271_write(wl, WL18XX_PHY_INIT_MEM_ADDR, (u8 *)¶ms,
+ sizeof(params), false);
+}
+
+static void wl18xx_enable_interrupts(struct wl1271 *wl)
+{
+ wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_ALL_EVENTS_VECTOR);
+
+ wlcore_enable_interrupts(wl);
+ wlcore_write_reg(wl, REG_INTERRUPT_MASK,
+ WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+}
+
+static int wl18xx_boot(struct wl1271 *wl)
+{
+ int ret;
+
+ ret = wl18xx_pre_boot(wl);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_boot_upload_nvs(wl);
+ if (ret < 0)
+ goto out;
+
+ wl18xx_pre_upload(wl);
+
+ ret = wlcore_boot_upload_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ wl18xx_set_mac_and_phy(wl);
+
+ ret = wlcore_boot_run_firmware(wl);
+ if (ret < 0)
+ goto out;
+
+ wl18xx_enable_interrupts(wl);
+
+out:
+ return ret;
+}
+
static struct wlcore_ops wl18xx_ops = {
- .identify_chip = wl18xx_identify_chip,
+ .identify_chip = wl18xx_identify_chip,
+ .boot = wl18xx_boot,
};
int __devinit wl18xx_probe(struct platform_device *pdev)
#define WL18XX_REG_COMMAND_MAILBOX_PTR (WL18XX_SCR_PAD0)
#define WL18XX_REG_EVENT_MAILBOX_PTR (WL18XX_SCR_PAD1)
+#define WL18XX_EEPROMLESS_IND (WL18XX_SCR_PAD4)
+
+#define WL18XX_WELP_ARM_COMMAND (WL18XX_REGISTERS_BASE + 0x7100)
+#define WL18XX_ENABLE (WL18XX_REGISTERS_BASE + 0x01543C)
#define WL18XX_CMD_MBOX_ADDRESS 0xB007B4
#define CHIP_ID_185x_PG10 (0x06030101)
+/* TODO: maybe move elsewhere? */
+#define NUM_OF_CHANNELS_11_ABG 150
+#define NUM_OF_CHANNELS_11_P 7
+#define WL18XX_NUM_OF_SUB_BANDS 9
+#define SRF_TABLE_LEN 16
+#define PIN_MUXING_SIZE 2
+
+enum {
+ COMPONENT_NO_SWITCH = 0x0,
+ COMPONENT_2_WAY_SWITCH = 0x1,
+ COMPONENT_3_WAY_SWITCH = 0x2,
+ COMPONENT_MATCHING = 0x3,
+};
+
+enum {
+ FEM_NONE = 0x0,
+ FEM_VENDOR_1 = 0x1,
+ FEM_VENDOR_2 = 0x2,
+ FEM_VENDOR_3 = 0x3,
+};
+
+enum {
+ BOARD_TYPE_FPGA_18XX = 0,
+ BOARD_TYPE_HDK_18XX = 1,
+ BOARD_TYPE_DVP_EVB_18XX = 2,
+};
+
+struct wl18xx_mac_and_phy_params {
+ u8 phy_standalone;
+ u8 rdl;
+ u8 enable_clpc;
+ u8 enable_tx_low_pwr_on_siso_rdl;
+ u8 auto_detect;
+ u8 dedicated_fem;
+
+ u8 low_band_component;
+
+ /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
+ u8 low_band_component_type;
+
+ u8 high_band_component;
+
+ /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
+ u8 high_band_component_type;
+ u8 number_of_assembled_ant2_4;
+ u8 number_of_assembled_ant5;
+ u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
+ u8 external_pa_dc2dc;
+ u8 tcxo_ldo_voltage;
+ u8 xtal_itrim_val;
+ u8 srf_state;
+ u8 srf1[SRF_TABLE_LEN];
+ u8 srf2[SRF_TABLE_LEN];
+ u8 srf3[SRF_TABLE_LEN];
+ u8 io_configuration;
+ u8 sdio_configuration;
+ u8 settings;
+ u8 rx_profile;
+ u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
+ u8 pwr_limit_reference_11_abg;
+ u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
+ u8 pwr_limit_reference_11p;
+ u8 per_sub_band_tx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
+ u8 per_sub_band_rx_trace_loss[WL18XX_NUM_OF_SUB_BANDS];
+ u8 primary_clock_setting_time;
+ u8 clock_valid_on_wake_up;
+ u8 secondary_clock_setting_time;
+ u8 board_type;
+ u8 padding[1];
+} __packed;
+
#endif /* __REG_H__ */
OSDN Git Service
