[PATCH] kill include/linux/eeprom.h

This patch kills include/linux/eeprom.h .

Rationale:
- it was only used by one single driver
- even this driver didn't do anything useful with it
- most of this file are non-inline and non-static functions (sic)

This removes include/linux/eeprom.h and cleans drivers/net/ns83820.c up.

If you think eeprom.h should be used more extensively, please consider:
- the code has to be moved from the header file to a .c file
- the currently empty write function has to be implemented
- ns83820.c or any other driver should actually use it

Noone did any of these during the more than 3 years eeprom.h already
exists...

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index a3c3fc9..f857ae9 100644 (file)
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -110,7 +110,6 @@
 #include <linux/init.h>
 #include <linux/ip.h>  /* for iph */
 #include <linux/in.h>  /* for IPPROTO_... */
-#include <linux/eeprom.h>
 #include <linux/compiler.h>
 #include <linux/prefetch.h>
 #include <linux/ethtool.h>
@@ -445,7 +444,6 @@ struct ns83820 {
 
        u32                     MEAR_cache;
        u32                     IMR_cache;
-       struct eeprom           ee;
 
        unsigned                linkstate;
 
@@ -1558,15 +1556,13 @@ static void ns83820_getmac(struct ns83820 *dev, u8 *mac)
        unsigned i;
        for (i=0; i<3; i++) {
                u32 data;
-#if 0  /* I've left this in as an example of how to use eeprom.h */
-               data = eeprom_readw(&dev->ee, 0xa + 2 - i);
-#else
+
                /* Read from the perfect match memory: this is loaded by
                 * the chip from the EEPROM via the EELOAD self test.
                 */
                writel(i*2, dev->base + RFCR);
                data = readl(dev->base + RFDR);
-#endif
+
                *mac++ = data;
                *mac++ = data >> 8;
        }
@@ -1851,8 +1847,6 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
        spin_lock_init(&dev->misc_lock);
        dev->pci_dev = pci_dev;
 
-       dev->ee.cache = &dev->MEAR_cache;
-       dev->ee.lock = &dev->misc_lock;
        SET_MODULE_OWNER(ndev);
        SET_NETDEV_DEV(ndev, &pci_dev->dev);
 
@@ -1887,9 +1881,6 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
 
        dev->IMR_cache = 0;
 
-       setup_ee_mem_bitbanger(&dev->ee, dev->base + MEAR, 3, 2, 1, 0,
-               0);
-
        err = request_irq(pci_dev->irq, ns83820_irq, SA_SHIRQ,
                          DRV_NAME, ndev);
        if (err) {

diff --git a/include/linux/eeprom.h b/include/linux/eeprom.h
deleted file mode 100644 (file)
index 38afd9d..0000000
--- a/include/linux/eeprom.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/* credit winbond-840.c
- */
-#include <asm/io.h>
-struct eeprom_ops {
-       void    (*set_cs)(void *ee);
-       void    (*clear_cs)(void *ee);
-};
-
-#define EEPOL_EEDI     0x01
-#define EEPOL_EEDO     0x02
-#define EEPOL_EECLK    0x04
-#define EEPOL_EESEL    0x08
-
-struct eeprom {
-       void *dev;
-       struct eeprom_ops *ops;
-
-       void __iomem *  addr;
-
-       unsigned        ee_addr_bits;
-
-       unsigned        eesel;
-       unsigned        eeclk;
-       unsigned        eedo;
-       unsigned        eedi;
-       unsigned        polarity;
-       unsigned        ee_state;
-
-       spinlock_t      *lock;
-       u32             *cache;
-};
-
-
-u8   eeprom_readb(struct eeprom *ee, unsigned address);
-void eeprom_read(struct eeprom *ee, unsigned address, u8 *bytes,
-               unsigned count);
-void eeprom_writeb(struct eeprom *ee, unsigned address, u8 data);
-void eeprom_write(struct eeprom *ee, unsigned address, u8 *bytes,
-               unsigned count);
-
-/* The EEPROM commands include the alway-set leading bit. */
-enum EEPROM_Cmds {
-        EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
-};
-
-void setup_ee_mem_bitbanger(struct eeprom *ee, void __iomem *memaddr, int eesel_bit, int eeclk_bit, int eedo_bit, int eedi_bit, unsigned polarity)
-{
-       ee->addr = memaddr;
-       ee->eesel = 1 << eesel_bit;
-       ee->eeclk = 1 << eeclk_bit;
-       ee->eedo = 1 << eedo_bit;
-       ee->eedi = 1 << eedi_bit;
-
-       ee->polarity = polarity;
-
-       *ee->cache = readl(ee->addr);
-}
-
-/* foo. put this in a .c file */
-static inline void eeprom_update(struct eeprom *ee, u32 mask, int pol)
-{
-       unsigned long flags;
-       u32 data;
-
-       spin_lock_irqsave(ee->lock, flags);
-       data = *ee->cache;
-
-       data &= ~mask;
-       if (pol)
-               data |= mask;
-
-       *ee->cache = data;
-//printk("update: %08x\n", data);
-       writel(data, ee->addr);
-       spin_unlock_irqrestore(ee->lock, flags);
-}
-
-void eeprom_clk_lo(struct eeprom *ee)
-{
-       int pol = !!(ee->polarity & EEPOL_EECLK);
-
-       eeprom_update(ee, ee->eeclk, pol);
-       udelay(2);
-}
-
-void eeprom_clk_hi(struct eeprom *ee)
-{
-       int pol = !!(ee->polarity & EEPOL_EECLK);
-
-       eeprom_update(ee, ee->eeclk, !pol);
-       udelay(2);
-}
-
-void eeprom_send_addr(struct eeprom *ee, unsigned address)
-{
-       int pol = !!(ee->polarity & EEPOL_EEDI);
-       unsigned i;
-       address |= 6 << 6;
-
-        /* Shift the read command bits out. */
-        for (i=0; i<11; i++) {
-               eeprom_update(ee, ee->eedi, ((address >> 10) & 1) ^ pol);
-               address <<= 1;
-               eeprom_clk_hi(ee);
-               eeprom_clk_lo(ee);
-        }
-       eeprom_update(ee, ee->eedi, pol);
-}
-
-u16   eeprom_readw(struct eeprom *ee, unsigned address)
-{
-       unsigned i;
-       u16     res = 0;
-
-       eeprom_clk_lo(ee);
-       eeprom_update(ee, ee->eesel, 1 ^ !!(ee->polarity & EEPOL_EESEL));
-       eeprom_send_addr(ee, address);
-
-       for (i=0; i<16; i++) {
-               u32 data;
-               eeprom_clk_hi(ee);
-               res <<= 1;
-               data = readl(ee->addr);
-//printk("eeprom_readw: %08x\n", data);
-               res |= !!(data & ee->eedo) ^ !!(ee->polarity & EEPOL_EEDO);
-               eeprom_clk_lo(ee);
-       }
-       eeprom_update(ee, ee->eesel, 0 ^ !!(ee->polarity & EEPOL_EESEL));
-
-       return res;
-}
-
-
-void eeprom_writeb(struct eeprom *ee, unsigned address, u8 data)
-{
-}