OSDN Git Service

Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"
authorDaniel Drake <drake@endlessm.com>
Thu, 5 Sep 2019 04:55:57 +0000 (12:55 +0800)
committerUlf Hansson <ulf.hansson@linaro.org>
Wed, 11 Sep 2019 13:57:21 +0000 (15:57 +0200)
This reverts commit 414126f9e5abf1973c661d24229543a9458fa8ce.

This commit broke eMMC storage access on a new consumer MiniPC based on
AMD SoC, which has eMMC connected to:

02:00.0 SD Host controller: O2 Micro, Inc. Device 8620 (rev 01) (prog-if 01)
Subsystem: O2 Micro, Inc. Device 0002

During probe, several errors are seen including:

  mmc1: Got data interrupt 0x02000000 even though no data operation was in progress.
  mmc1: Timeout waiting for hardware interrupt.
  mmc1: error -110 whilst initialising MMC card

Reverting this commit allows the eMMC storage to be detected & usable
again.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Fixes: 414126f9e5ab ("mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host
controller")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
drivers/mmc/host/sdhci-pci-o2micro.c

index 9dc4548..19944b0 100644 (file)
@@ -432,7 +432,6 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
                                        mmc_hostname(host->mmc));
                                host->flags &= ~SDHCI_SIGNALING_330;
                                host->flags |= SDHCI_SIGNALING_180;
-                               host->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
                                host->mmc->caps2 |= MMC_CAP2_NO_SD;
                                host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
                                pci_write_config_dword(chip->pdev,
@@ -682,6 +681,7 @@ static const struct sdhci_ops sdhci_pci_o2_ops = {
 const struct sdhci_pci_fixes sdhci_o2 = {
        .probe = sdhci_pci_o2_probe,
        .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+       .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
        .probe_slot = sdhci_pci_o2_probe_slot,
 #ifdef CONFIG_PM_SLEEP
        .resume = sdhci_pci_o2_resume,