config I2C_ALTERA
tristate "Altera Soft IP I2C"
- depends on (ARCH_SOCFPGA || NIOS2) && OF
+ depends on ARCH_SOCFPGA || NIOS2 || COMPILE_TEST
+ depends on OF
help
If you say yes to this option, support will be included for the
Altera Soft IP I2C interfaces on SoCFPGA and Nios2 architectures.
config I2C_AT91
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
- depends on ARCH_AT91
+ depends on ARCH_AT91 || COMPILE_TEST
help
This supports the use of the I2C interface on Atmel AT91
processors.
config I2C_BCM2835
tristate "Broadcom BCM2835 I2C controller"
- depends on ARCH_BCM2835 || ARCH_BRCMSTB
+ depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
+ depends on COMMON_CLK
help
If you say yes to this option, support will be included for the
BCM2835 I2C controller.
config I2C_BCM_KONA
tristate "BCM Kona I2C adapter"
- depends on ARCH_BCM_MOBILE
- default y
+ depends on ARCH_BCM_MOBILE || COMPILE_TEST
+ default y if ARCH_BCM_MOBILE
help
If you say yes to this option, support will be included for the
I2C interface on the Broadcom Kona family of processors.
config I2C_DAVINCI
tristate "DaVinci I2C driver"
- depends on ARCH_DAVINCI || ARCH_KEYSTONE
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
help
Support for TI DaVinci I2C controller driver.
config I2C_DIGICOLOR
tristate "Conexant Digicolor I2C driver"
- depends on ARCH_DIGICOLOR
+ depends on ARCH_DIGICOLOR || COMPILE_TEST
help
Support for Conexant Digicolor SoCs (CX92755) I2C controller driver.
config I2C_EXYNOS5
tristate "Exynos5 high-speed I2C driver"
- depends on ARCH_EXYNOS && OF
- default y
+ depends on OF
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default y if ARCH_EXYNOS
help
High-speed I2C controller on Exynos5 based Samsung SoCs.
config I2C_HIGHLANDER
tristate "Highlander FPGA SMBus interface"
- depends on SH_HIGHLANDER
+ depends on SH_HIGHLANDER || COMPILE_TEST
help
If you say yes to this option, support will be included for
the SMBus interface located in the FPGA on various Highlander
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
- depends on ARCH_IOP32X || ARCH_IXP4XX
+ depends on ARCH_IOP32X || ARCH_IXP4XX || COMPILE_TEST
help
Say Y here if you want to use the IIC bus controller on
the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
config I2C_MESON
tristate "Amlogic Meson I2C controller"
depends on ARCH_MESON || COMPILE_TEST
+ depends on COMMON_CLK
help
If you say yes to this option, support will be included for the
I2C interface on the Amlogic Meson family of SoCs.
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU
+ depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
config I2C_MXS
tristate "Freescale i.MX28 I2C interface"
- depends on SOC_IMX28
+ depends on SOC_IMX28 || COMPILE_TEST
select STMP_DEVICE
help
Say Y here if you want to use the I2C bus controller on
config I2C_OMAP
tristate "OMAP I2C adapter"
- depends on ARCH_OMAP || ARCH_K3
+ depends on ARCH_OMAP || ARCH_K3 || COMPILE_TEST
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes to this option, support will be included for the
config I2C_PMCMSP
tristate "PMC MSP I2C TWI Controller"
- depends on PMC_MSP
+ depends on PMC_MSP || COMPILE_TEST
help
This driver supports the PMC TWI controller on MSP devices.
config I2C_PNX
tristate "I2C bus support for Philips PNX and NXP LPC targets"
- depends on ARCH_LPC32XX
+ depends on ARCH_LPC32XX || COMPILE_TEST
help
This driver supports the Philips IP3204 I2C IP block master and/or
slave controller
config I2C_PXA
tristate "Intel PXA2XX I2C adapter"
- depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF)
+ depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF) || COMPILE_TEST
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
- depends on HAVE_S3C2410_I2C
+ depends on HAVE_S3C2410_I2C || COMPILE_TEST
help
Say Y here to include support for I2C controller in the
Samsung SoCs.
config I2C_SIRF
tristate "CSR SiRFprimaII I2C interface"
- depends on ARCH_SIRF
+ depends on ARCH_SIRF || COMPILE_TEST
help
If you say yes to this option, support will be included for the
CSR SiRFprimaII I2C interface.
config I2C_SPRD
tristate "Spreadtrum I2C interface"
- depends on I2C=y && ARCH_SPRD
+ depends on I2C=y && (ARCH_SPRD || COMPILE_TEST)
help
If you say yes to this option, support will be included for the
Spreadtrum I2C interface.
config I2C_ST
tristate "STMicroelectronics SSC I2C support"
- depends on ARCH_STI
+ depends on ARCH_STI || COMPILE_TEST
help
Enable this option to add support for STMicroelectronics SoCs
hardware SSC (Synchronous Serial Controller) as an I2C controller.
config I2C_STU300
tristate "ST Microelectronics DDC I2C interface"
- depends on MACH_U300
+ depends on MACH_U300 || COMPILE_TEST
default y if MACH_U300
help
If you say yes to this option, support will be included for the
config I2C_TEGRA
tristate "NVIDIA Tegra internal I2C controller"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || (COMPILE_TEST && (ARC || ARM || ARM64 || M68K || RISCV || SUPERH || SPARC))
+ # COMPILE_TEST needs architectures with readsX()/writesX() primitives
help
If you say yes to this option, support will be included for the
I2C controller embedded in NVIDIA Tegra SOCs
config I2C_TEGRA_BPMP
tristate "NVIDIA Tegra BPMP I2C controller"
- depends on TEGRA_BPMP
- default y
+ depends on TEGRA_BPMP || COMPILE_TEST
+ default y if TEGRA_BPMP
help
If you say yes to this option, support will be included for the I2C
controller embedded in NVIDIA Tegra SoCs accessed via the BPMP.
config I2C_WMT
tristate "Wondermedia WM8xxx SoC I2C bus support"
- depends on ARCH_VT8500
+ depends on ARCH_VT8500 || COMPILE_TEST
help
Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
SoCs.
config I2C_XLR
tristate "Netlogic XLR and Sigma Designs I2C support"
- depends on CPU_XLR || ARCH_TANGO
+ depends on CPU_XLR || ARCH_TANGO || COMPILE_TEST
help
This driver enables support for the on-chip I2C interface of
the Netlogic XLR/XLS MIPS processors and Sigma Designs SOCs.
config I2C_MLXCPLD
tristate "Mellanox I2C driver"
- depends on X86_64
+ depends on X86_64 || COMPILE_TEST
help
This exposes the Mellanox platform I2C busses to the linux I2C layer
for X86 based systems.