config MEDIA_CEC_SUPPORT
bool "HDMI CEC support"
---help---
- Enable support for HDMI CEC (Consumer Electronics Control),
- which is an optional HDMI feature.
+ Enable support for HDMI CEC (Consumer Electronics Control),
+ which is an optional HDMI feature.
- Say Y when you have an HDMI receiver, transmitter or a USB CEC
- adapter that supports HDMI CEC.
+ Say Y when you have an HDMI receiver, transmitter or a USB CEC
+ adapter that supports HDMI CEC.
source "drivers/media/cec/Kconfig"
dvb-net-$(CONFIG_DVB_NET) := dvb_net.o
dvb-vb2-$(CONFIG_DVB_MMSP) := dvb_vb2.o
-dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o \
+dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o \
dvb_ca_en50221.o dvb_frontend.o \
$(dvb-net-y) dvb_ringbuffer.o $(dvb-vb2-y) dvb_math.o
* @ca: CA instance.
* @slot: Slot to write to.
* @buf: The data in this buffer is treated as a complete link-level packet to
- * be written.
+ * be written.
* @bytes_write: Size of ebuf.
*
* return: Number of bytes written, or < 0 on error.
/* Validate length */
if (d->msg_len > sizeof(d->msg))
- return -EINVAL;
+ return -EINVAL;
/* Dump DiSEqC message */
if (debug) {
* - In case of UCODE_UPLOAD: I2C error.
* - In case of UCODE_VERIFY: I2C error or image on device
* is not equal to image provided to this control function.
- * -EINVAL:
+ * -EINVAL:
* - Invalid arguments.
* - Provided image is corrupt
*/
*
* @adr: I2C address of the DRX-K
* @parallel_ts: True means that the device uses parallel TS,
- * Serial otherwise.
+ * Serial otherwise.
* @dynamic_clk: True means that the clock will be dynamically
* adjusted. Static clock otherwise.
* @enable_merr_cfg: Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG.
static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config,
struct i2c_adapter *i2c)
{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
}
#endif
static int mb86a20s_get_frontend_algo(struct dvb_frontend *fe)
{
- return DVBFE_ALGO_HW;
+ return DVBFE_ALGO_HW;
}
static const struct dvb_frontend_ops mb86a20s_ops;
static struct i2c_driver mn88473_driver = {
.driver = {
- .name = "mn88473",
+ .name = "mn88473",
.suppress_bind_attrs = true,
},
.probe = mn88473_probe,
static inline struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c, u8 adr)
{
- printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
- return NULL;
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
}
#endif
camera sensor.
config VIDEO_S5K4ECGX
- tristate "Samsung S5K4ECGX sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ tristate "Samsung S5K4ECGX sensor support"
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
select CRC32
- ---help---
- This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M
- camera sensor with an embedded SoC image signal processor.
+ ---help---
+ This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M
+ camera sensor with an embedded SoC image signal processor.
config VIDEO_S5K5BAF
tristate "Samsung S5K5BAF sensor support"
};
/*
- * 2^32
+ * 2^32
* FSC(reg) = FSC (HZ) * --------
* 27000000
*/
};
/*
- * 2^32
+ * 2^32
* FSC(reg) = FSC (HZ) * --------
* 27000000
*/
/* Assuming TV */
/* Calculate the PLL frequency word based on the adjusted ifHz */
- pll_freq = div_u64((u64)ifHz * 268435456, 50000000);
- pll_freq_word = (u32)pll_freq;
+ pll_freq = div_u64((u64)ifHz * 268435456, 50000000);
+ pll_freq_word = (u32)pll_freq;
- cx25840_write4(client, DIF_PLL_FREQ_WORD, pll_freq_word);
+ cx25840_write4(client, DIF_PLL_FREQ_WORD, pll_freq_word);
/* Round down to the nearest 100KHz */
ifHz = (ifHz / 100000) * 100000;
* Rx and Tx Clock Divider register computations
*
* Note the largest clock divider value of 0xffff corresponds to:
- * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
+ * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
* which fits in 21 bits, so we'll use unsigned int for time arguments.
*/
static inline u16 count_to_clock_divider(unsigned int d)
* Low Pass Filter register calculations
*
* Note the largest count value of 0xffff corresponds to:
- * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
+ * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
* which fits in 21 bits, so we'll use unsigned int for time arguments.
*/
static inline u16 count_to_lpf_count(unsigned int d)
if (csi_format->compressed == old_csi_format->compressed)
return 0;
- valid_link_freqs =
+ valid_link_freqs =
&sensor->valid_link_freqs[sensor->csi_format->compressed
- sensor->compressed_min_bpp];
#define VIDEO_STD_NTSC_MJ_BIT_AS 0x01
#define VIDEO_STD_PAL_BDGHIN_BIT_AS 0x03
-#define VIDEO_STD_PAL_M_BIT_AS 0x05
+#define VIDEO_STD_PAL_M_BIT_AS 0x05
#define VIDEO_STD_PAL_COMBINATION_N_BIT_AS 0x07
#define VIDEO_STD_NTSC_4_43_BIT_AS 0x09
-#define VIDEO_STD_SECAM_BIT_AS 0x0b
+#define VIDEO_STD_SECAM_BIT_AS 0x0b
/* Reserved 29h-2bh */
if (v4l2_event_pending(&id->fh))
res |= POLLPRI;
- if (eof && videobuf_poll == POLLERR)
+ if (eof && videobuf_poll == POLLERR)
return res | POLLHUP;
return res | videobuf_poll;
}
unsigned int width, unsigned int height,
enum v4l2_field field)
{
- struct cx18 *cx = s->cx;
+ struct cx18 *cx = s->cx;
int rc = 0;
/* check settings */
* Rx and Tx Clock Divider register computations
*
* Note the largest clock divider value of 0xffff corresponds to:
- * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
+ * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
* which fits in 21 bits, so we'll use unsigned int for time arguments.
*/
static inline u16 count_to_clock_divider(unsigned int d)
* Low Pass Filter register calculations
*
* Note the largest count value of 0xffff corresponds to:
- * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
+ * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
* which fits in 21 bits, so we'll use unsigned int for time arguments.
*/
static inline u16 count_to_lpf_count(unsigned int d)
/********************** card configuration *******************************/
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
This keeps the PCI ID database up to date. Note that the entries
must be added under vendor 0x4444 (Conexant) as subsystem IDs.
New vendor IDs should still be added to the vendor ID list. */
* Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org>
*
* based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/
- * by Dany Salman <salmandany@yahoo.fr>
+ * by Dany Salman <salmandany@yahoo.fr>
* Copyright (c) 2004 TDF
*
* This program is free software; you can redistribute it and/or modify
* Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
*
* based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
*
* based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
*
* based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
*
* based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info>
*
* based on pt1dvr - http://pt1dvr.sourceforge.jp/
- * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
+ * by Tomoaki Ishikawa <tomy@users.sourceforge.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>
- Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
+ Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
for further details about this card.
This program is free software; you can redistribute it and/or modify
frameinterval->denominator = 25;
break;
default:
- dev_warn(&dev->pci->dev, "tw5864_frameinterval_get requested for unknown std %d\n",
+ dev_warn(&dev->pci->dev, "tw5864_frameinterval_get requested for unknown std %d\n",
input->std);
return -EINVAL;
}
depends on DEBUG_FS
help
Select this to see information about the internal state and the last
- operation of STMicroelectronics HVA multi-format video encoder in
- debugfs.
+ operation of STMicroelectronics HVA multi-format video encoder in
+ debugfs.
- Choose N unless you know you need this.
+ Choose N unless you know you need this.
config VIDEO_STI_DELTA
tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver"
select CEC_CORE
select CEC_NOTIFIER
---help---
- This is a driver for Samsung S5P HDMI CEC interface. It uses the
- generic CEC framework interface.
- CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
+ This is a driver for Samsung S5P HDMI CEC interface. It uses the
+ generic CEC framework interface.
+ CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
config VIDEO_STI_HDMI_CEC
tristate "STMicroelectronics STiH4xx HDMI CEC driver"
select CEC_CORE
select CEC_NOTIFIER
---help---
- This is a driver for STIH4xx HDMI CEC interface. It uses the
- generic CEC framework interface.
- CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
+ This is a driver for STIH4xx HDMI CEC interface. It uses the
+ generic CEC framework interface.
+ CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
config VIDEO_STM32_HDMI_CEC
tristate "STMicroelectronics STM32 HDMI CEC driver"
select REGMAP_MMIO
select CEC_CORE
---help---
- This is a driver for STM32 interface. It uses the
- generic CEC framework interface.
- CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
+ This is a driver for STM32 interface. It uses the
+ generic CEC framework interface.
+ CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
config VIDEO_TEGRA_HDMI_CEC
tristate "Tegra HDMI CEC driver"
select CEC_CORE
select CEC_NOTIFIER
---help---
- This is a driver for the Tegra HDMI CEC interface. It uses the
- generic CEC framework interface.
- The CEC bus is present in the HDMI connector and enables communication
- between compatible devices.
+ This is a driver for the Tegra HDMI CEC interface. It uses the
+ generic CEC framework interface.
+ The CEC bus is present in the HDMI connector and enables communication
+ between compatible devices.
endif #CEC_PLATFORM_DRIVERS
* Note that M32700UT does not support CIF mode, but QVGA is
* supported by M32700UT hardware using VGA mode of AR LSI.
*
- * Supported: VGA (Normal mode, Interlace mode)
+ * Supported: VGA (Normal mode, Interlace mode)
* QVGA (Always Interlace mode of VGA)
*
*/
/*
* ar_initialize()
- * ar_initialize() is called by video_register_device() and
+ * ar_initialize() is called by video_register_device() and
* initializes AR LSI and peripherals.
*
* -1 is returned in all failures.
struct bfin_ppi_regs *reg = info->base;
unsigned short status;
- /* register on bf561 is cleared when read
+ /* register on bf561 is cleared when read
* others are W1C
*/
status = bfin_read16(®->status);
* pre-process the Bayer RGB data, before writing it to SDRAM.
*
* TODO: 1) Raw bayer parameter settings and bayer capture
- * 2) Split module parameter structure to module specific ioctl structs
+ * 2) Split module parameter structure to module specific ioctl structs
* 3) add support for lense shading correction
* 4) investigate if enum used for user space type definition
- * to be replaced by #defines or integer
+ * to be replaced by #defines or integer
*/
#include <linux/platform_device.h>
#include <linux/uaccess.h>
* may be supported using the same module.
*
* TODO: Test Raw bayer parameter settings and bayer capture
- * Split module parameter structure to module specific ioctl structs
- * investigate if enum used for user space type definition
- * to be replaced by #defines or integer
+ * Split module parameter structure to module specific ioctl structs
+ * investigate if enum used for user space type definition
+ * to be replaced by #defines or integer
*/
#include <linux/platform_device.h>
#include <linux/uaccess.h>
*
*
* decoder(TVP5146/ YUV/
- * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
- * data input | |
+ * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
+ * data input | |
* V |
* SDRAM |
* V
* block such as IPIPE (on DM355 only).
*
* Features supported
- * - MMAP IO
+ * - MMAP IO
* - Capture using TVP5146 over BT.656
* - support for interfacing decoders using sub device model
* - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
* @input: capture input type, grp_id of the attached subdev
* @user_subdev_api: true if subdevs are not configured by the host driver
* @inh_sensor_ctrls: a flag indicating v4l2 controls are inherited from
- * an image sensor subdev
+ * an image sensor subdev
*/
struct fimc_vid_cap {
struct fimc_ctx *ctx;
* @max_height: maximum camera interface input height in pixels
* @out_width_align: minimum output width alignment in pixels
* @win_hor_offs_align: minimum camera interface crop window horizontal
- * offset alignment in pixels
+ * offset alignment in pixels
* @out_hor_offs_align: minimum output DMA compose rectangle horizontal
- * offset alignment in pixels
+ * offset alignment in pixels
* @max_dma_bufs: number of output DMA buffer start address registers
* @num_instances: total number of FIMC-LITE IP instances available
*/
* @inst_addr : VPU decoder instance address
* @signaled : 1 - Host has received ack message from VPU, 0 - not received
* @ctx : context for v4l2 layer integration
- * @dev : platform device of VPU
+ * @dev : platform device of VPU
* @wq : wait queue to wait VPU message ack
* @handler : ipi handler for each decoder
*/
/*
* isp_pipeline_is_last - Verify if entity has an enabled link to the output
- * video node
+ * video node
* @me: ISP module's media entity
*
* Returns 1 if the entity has an enabled link to the output video node or 0
* @dbg: context debug info
*/
struct hva_ctx {
- struct hva_dev *hva_dev;
+ struct hva_dev *hva_dev;
struct v4l2_fh fh;
struct v4l2_ctrl_handler ctrl_handler;
struct hva_controls ctrls;
#define VCR_CI_BSS 0x00000002 /* WTF "bit stream selection" */
#define VCR_CI_3BUFS 0x00000004 /* 1 = 3 buffers, 0 = 2 buffers */
#define VCR_CI_VIPEN 0x00000008 /* VIP enable */
-#define VCR_CI_CCIR601_8 0 /* CCIR601 input stream, 8 bit */
+#define VCR_CI_CCIR601_8 0 /* CCIR601 input stream, 8 bit */
#define VCR_CI_CCIR656_8 0x00000010 /* ... CCIR656, 8 bit */
#define VCR_CI_CCIR601_16 0x00000020 /* ... CCIR601, 16 bit */
#define VCR_CI_CCIR656_16 0x00000030 /* ... CCIR656, 16 bit */
* anybody does please mail me.
*
* For the pdf file see:
- * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf
+ * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf
*
*
* CHANGES:
* http://www.spinics.net/lists/linux-usb-devel/msg10109.html
*
* Version 0.01: First working version.
- * It's required to blacklist AverMedia USB Radio
- * in usbhid/hid-quirks.c
+ * It's required to blacklist AverMedia USB Radio
+ * in usbhid/hid-quirks.c
* Version 0.10: A lot of cleanups and fixes: unpluging the device,
- * few mutex locks were added, codinstyle issues, etc.
- * Added stereo support. Thanks to
- * Douglas Schilling Landgraf <dougsland@gmail.com> and
- * David Ellingsworth <david@identd.dyndns.org>
- * for discussion, help and support.
+ * few mutex locks were added, codinstyle issues, etc.
+ * Added stereo support. Thanks to
+ * Douglas Schilling Landgraf <dougsland@gmail.com> and
+ * David Ellingsworth <david@identd.dyndns.org>
+ * for discussion, help and support.
* Version 0.11: Converted to v4l2_device.
*
* Many things to do:
- * - Correct power management of device (suspend & resume)
- * - Add code for scanning and smooth tuning
- * - Add code for sensitivity value
- * - Correct mistakes
- * - In Japan another FREQ_MIN and FREQ_MAX
+ * - Correct power management of device (suspend & resume)
+ * - Add code for scanning and smooth tuning
+ * - Add code for sensitivity value
+ * - Correct mistakes
+ * - In Japan another FREQ_MIN and FREQ_MAX
*/
/* kernel includes */
* - switched from bit structs to bit masks
* - header file cleaned and integrated
* 2008-01-14 Tobias Lorenz <tobias.lorenz@gmx.net>
- * Version 1.0.2
- * - hex values are now lower case
- * - commented USB ID for ADS/Tech moved on todo list
- * - blacklisted si470x in hid-quirks.c
- * - rds buffer handling functions integrated into *_work, *_read
- * - rds_command in si470x_poll exchanged against simple retval
- * - check for firmware version 15
- * - code order and prototypes still remain the same
- * - spacing and bottom of band codes remain the same
+ * Version 1.0.2
+ * - hex values are now lower case
+ * - commented USB ID for ADS/Tech moved on todo list
+ * - blacklisted si470x in hid-quirks.c
+ * - rds buffer handling functions integrated into *_work, *_read
+ * - rds_command in si470x_poll exchanged against simple retval
+ * - check for firmware version 15
+ * - code order and prototypes still remain the same
+ * - spacing and bottom of band codes remain the same
* 2008-01-16 Tobias Lorenz <tobias.lorenz@gmx.net>
* Version 1.0.3
- * - code reordered to avoid function prototypes
+ * - code reordered to avoid function prototypes
* - switch/case defaults are now more user-friendly
* - unified comment style
* - applied all checkpatch.pl v1.12 suggestions
* - more safety checks, let si470x_get_freq return errno
* - vidioc behavior corrected according to v4l2 spec
* 2008-10-20 Alexey Klimov <klimov.linux@gmail.com>
- * - add support for KWorld USB FM Radio FM700
- * - blacklisted KWorld radio in hid-core.c and hid-ids.h
+ * - add support for KWorld USB FM Radio FM700
+ * - blacklisted KWorld radio in hid-core.c and hid-ids.h
* 2008-12-03 Mark Lord <mlord@pobox.com>
* - add support for DealExtreme USB Radio
* 2009-01-31 Bob Ross <pigiron@gmx.com>
#define FM_RDS_GROUP_TYPE_MASK_15B ((unsigned long)1<<31)
/* RX Alternate Frequency info */
-#define FM_RDS_MIN_AF 1
-#define FM_RDS_MAX_AF 204
-#define FM_RDS_MAX_AF_JAPAN 140
-#define FM_RDS_1_AF_FOLLOWS 225
-#define FM_RDS_25_AF_FOLLOWS 249
+#define FM_RDS_MIN_AF 1
+#define FM_RDS_MAX_AF 204
+#define FM_RDS_MAX_AF_JAPAN 140
+#define FM_RDS_1_AF_FOLLOWS 225
+#define FM_RDS_25_AF_FOLLOWS 249
/* RDS system type (RDS/RBDS) */
#define FM_RDS_SYSTEM_RDS 0
IR transmitting (aka "blasting") and for the lirc daemon.
menuconfig RC_DECODERS
- bool "Remote controller decoders"
+ bool "Remote controller decoders"
depends on RC_CORE
default y
Serial Port Transmitter support
config IR_SIR
- tristate "Built-in SIR IrDA port"
- depends on RC_CORE
- ---help---
+ tristate "Built-in SIR IrDA port"
+ depends on RC_CORE
+ ---help---
Say Y if you want to use a IrDA SIR port Transceivers.
To compile this driver as a module, choose M here: the module will
/*
* MT2063_SetReceiverMode() - Set the MT2063 receiver mode, according with
- * the selected enum mt2063_delivery_sys type.
+ * the selected enum mt2063_delivery_sys type.
*
* (DNC1GC & DNC2GC are the values, which are used, when the specific
* DNC Output is selected, the other is always off)
* Save original LO1 and LO2 register values
*/
ofLO1 = state->AS_Data.f_LO1;
- ofLO2 = state->AS_Data.f_LO2;
+ ofLO2 = state->AS_Data.f_LO2;
/*
* Find and set RF Band setting
static struct i2c_driver si2157_driver = {
.driver = {
- .name = "si2157",
+ .name = "si2157",
.suppress_bind_attrs = true,
},
.probe = si2157_probe,
*
* state structure must contain the following:
*
- * struct list_head hybrid_tuner_instance_list;
+ * struct list_head hybrid_tuner_instance_list;
* struct tuner_i2c_props i2c_props;
*
* hybrid_tuner_instance_list (both within state structure and globally)
* as10x_cmd_eLNA_change_mode - send eLNA change mode command to AS10x
* @adap: pointer to AS10x bus adapter
* @mode: mode selected:
- * - ON : 0x0 => eLNA always ON
- * - OFF : 0x1 => eLNA always OFF
- * - AUTO : 0x2 => eLNA follow hysteresis parameters
+ * - ON : 0x0 => eLNA always ON
+ * - OFF : 0x1 => eLNA always OFF
+ * - AUTO : 0x2 => eLNA follow hysteresis parameters
* to be ON or OFF
*
* Return 0 on success or negative value in case of error.
/******************************************************************************
* A F E - B L O C K C O N T R O L functions *
- * [ANALOG FRONT END] *
+ * [ANALOG FRONT END] *
******************************************************************************/
static int afe_write_byte(struct cx231xx *dev, u16 saddr, u8 data)
{
Empiatech em28xx chips.
config VIDEO_EM28XX_RC
- tristate "EM28XX Remote Controller support"
- depends on RC_CORE
- depends on VIDEO_EM28XX
- depends on !(RC_CORE=m && VIDEO_EM28XX=y)
- default VIDEO_EM28XX
- ---help---
- Enables Remote Controller support on em28xx driver.
+ tristate "EM28XX Remote Controller support"
+ depends on RC_CORE
+ depends on VIDEO_EM28XX
+ depends on !(RC_CORE=m && VIDEO_EM28XX=y)
+ default VIDEO_EM28XX
+ ---help---
+ Enables Remote Controller support on em28xx driver.
int i, steps, retval = 0;
if (v4l2_ctrl_g_ctrl(gspca_dev->autogain) == 0)
- return 0;
+ return 0;
orig_gain = gain = v4l2_ctrl_g_ctrl(gspca_dev->gain);
orig_exposure = exposure = v4l2_ctrl_g_ctrl(gspca_dev->exposure);
}
if (gain != orig_gain) {
- v4l2_ctrl_s_ctrl(gspca_dev->gain, gain);
+ v4l2_ctrl_s_ctrl(gspca_dev->gain, gain);
retval = 1;
}
if (exposure != orig_exposure) {
- v4l2_ctrl_s_ctrl(gspca_dev->exposure, exposure);
+ v4l2_ctrl_s_ctrl(gspca_dev->exposure, exposure);
retval = 1;
}
int steps, retval = 0;
if (v4l2_ctrl_g_ctrl(gspca_dev->autogain) == 0)
- return 0;
+ return 0;
orig_gain = gain = v4l2_ctrl_g_ctrl(gspca_dev->gain);
orig_exposure = exposure = v4l2_ctrl_g_ctrl(gspca_dev->exposure);
}
if (gain != orig_gain) {
- v4l2_ctrl_s_ctrl(gspca_dev->gain, gain);
+ v4l2_ctrl_s_ctrl(gspca_dev->gain, gain);
retval = 1;
}
if (exposure != orig_exposure) {
- v4l2_ctrl_s_ctrl(gspca_dev->exposure, exposure);
+ v4l2_ctrl_s_ctrl(gspca_dev->exposure, exposure);
retval = 1;
}
input_report_key(gspca_dev->input_dev, KEY_CAMERA, a);
input_sync(gspca_dev->input_dev);
#endif
- sd->params.qx3.button = a;
+ sd->params.qx3.button = a;
}
if (sd->params.qx3.button) {
/* button pressed - unlock the latch */
/* Refers to the CIF 352x288 and QCIF 176x144 */
/* 1: 288 lines, 2: 144 lines */
-#define STV_Y_CTRL 0x15c3
+#define STV_Y_CTRL 0x15c3
#define STV_RESET 0x1620
};
static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = {
- .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
- .if_lvl = 1, .rfagc_top = 0x37, },
- .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
- .if_lvl = 1, .rfagc_top = 0x37, },
- .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
- .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+ .if_lvl = 1, .rfagc_top = 0x37, },
};
static struct tda18271_config hauppauge_tda18271_dvb_config = {
struct tm6000_capabilities caps;
/* Used to load alsa/dvb */
- struct work_struct request_module_wk;
+ struct work_struct request_module_wk;
/* Tuner configuration */
int tuner_type; /* type of the tuner */
config VIDEO_USBTV
- tristate "USBTV007 video capture support"
- depends on VIDEO_V4L2 && SND
- select SND_PCM
- select VIDEOBUF2_VMALLOC
+ tristate "USBTV007 video capture support"
+ depends on VIDEO_V4L2 && SND
+ select SND_PCM
+ select VIDEOBUF2_VMALLOC
- ---help---
- This is a video4linux2 driver for USBTV007 based video capture devices.
+ ---help---
+ This is a video4linux2 driver for USBTV007 based video capture devices.
- To compile this driver as a module, choose M here: the
- module will be called usbtv
+ To compile this driver as a module, choose M here: the
+ module will be called usbtv
# Used by drivers that need v4l2-mem2mem.ko
config V4L2_MEM2MEM_DEV
- tristate
- depends on VIDEOBUF2_CORE
+ tristate
+ depends on VIDEOBUF2_CORE
# Used by LED subsystem flash drivers
config V4L2_FLASH_LED_CLASS
struct v4l2_window32 {
struct v4l2_rect w;
- __u32 field; /* enum v4l2_field */
+ __u32 field; /* enum v4l2_field */
__u32 chromakey;
compat_caddr_t clips; /* actually struct v4l2_clip32 * */
__u32 clipcount;
* @t2: with this struct.
* @pclock_delta: the allowed pixelclock deviation.
* @match_reduced_fps: if true, then fail if V4L2_DV_FL_REDUCED_FPS does not
- * match.
+ * match.
*
* Compare t1 with t2 with a given margin of error for the pixelclock.
*/
* struct analog_parameters - Parameters to tune into an analog/radio channel
*
* @frequency: Frequency used by analog TV tuner (either in 62.5 kHz step,
- * for TV, or 62.5 Hz for radio)
+ * for TV, or 62.5 Hz for radio)
* @mode: Tuner mode, as defined on enum v4l2_tuner_type
* @audmode: Audio mode as defined for the rxsubchans field at videodev2.h,
- * e. g. V4L2_TUNER_MODE_*
+ * e. g. V4L2_TUNER_MODE_*
* @std: TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_*
*
* Hybrid tuners should be supported by both V4L2 and DVB APIs. This
* @get_frequency: get the actual tuned frequency
* @get_bandwidth: get the bandwitdh used by the low pass filters
* @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband,
- * should return 0.
+ * should return 0.
* @get_status: returns the frontend lock status
* @get_rf_strength: returns the RF signal strength. Used mostly to support
* analog TV and radio. Digital TV should report, instead,
* implementing this callback only if DVBv3 API
* compatibility is wanted.
* @read_snr: legacy callback function to return the Signal/Noise
- * rate. Newer drivers should provide such info via
+ * rate. Newer drivers should provide such info via
* DVBv5 API, e. g. @set_frontend/@get_frontend,
* implementing this callback only if DVBv3 API
* compatibility is wanted.
* @fec_inner: Forward error correction inner Code Rate
* @transmission_mode: Transmission Mode
* @bandwidth_hz: Bandwidth, in Hz. A zero value means that userspace
- * wants to autodetect.
+ * wants to autodetect.
* @guard_interval: Guard Interval
* @hierarchy: Hierarchy
* @symbol_rate: Symbol Rate
* @lna: Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA)
* @strength: DVBv5 API statistics: Signal Strength
* @cnr: DVBv5 API statistics: Signal to Noise ratio of the
- * (main) carrier
+ * (main) carrier
* @pre_bit_error: DVBv5 API statistics: pre-Viterbi bit error count
* @pre_bit_count: DVBv5 API statistics: pre-Viterbi bit count
* @post_bit_error: DVBv5 API statistics: post-Viterbi bit error count
* @b: &struct dmx_buffer passed from userspace in
* order to handle &DMX_QUERYBUF.
*
- *
+ *
*/
int dvb_vb2_querybuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b);
* @module: initialized with THIS_MODULE at the caller
* @device: pointer to struct device that corresponds to the device driver
* @adapter_nums: Array with a list of the numbers for @dvb_register_adapter;
- * to select among them. Typically, initialized with:
+ * to select among them. Typically, initialized with:
* DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nums)
*/
int dvb_register_adapter(struct dvb_adapter *adap, const char *name,
#ifdef CONFIG_MEDIA_CONTROLLER_DVB
/**
* dvb_create_media_graph - Creates media graph for the Digital TV part of the
- * device.
+ * device.
*
* @adap: pointer to &struct dvb_adapter
* @create_rf_connector: if true, it creates the RF connector too
* in order to identify a match
*
* @V4L2_ASYNC_MATCH_CUSTOM: Match will use the logic provided by &struct
- * v4l2_async_subdev.match ops
+ * v4l2_async_subdev.match ops
* @V4L2_ASYNC_MATCH_DEVNAME: Match will use the device name
* @V4L2_ASYNC_MATCH_I2C: Match will check for I2C adapter ID and address
* @V4L2_ASYNC_MATCH_FWNODE: Match will use firmware node
* string containing the device name to be matched.
* Used if @match_type is %V4L2_ASYNC_MATCH_DEVNAME.
* @match.i2c: embedded struct with I2C parameters to be matched.
- * Both @match.i2c.adapter_id and @match.i2c.address
+ * Both @match.i2c.adapter_id and @match.i2c.address
* should be matched.
* Used if @match_type is %V4L2_ASYNC_MATCH_I2C.
* @match.i2c.adapter_id:
/**
* v4l2_async_register_subdev - registers a sub-device to the asynchronous
- * subdevice framework
+ * subdevice framework
*
* @sd: pointer to &struct v4l2_subdev
*/
/**
* v4l2_async_unregister_subdev - unregisters a sub-device to the asynchronous
- * subdevice framework
+ * subdevice framework
*
* @sd: pointer to &struct v4l2_subdev
*/
* @client_type: name of the chip that's on the adapter.
* @addr: I2C address. If zero, it will use @probe_addrs
* @probe_addrs: array with a list of address. The last entry at such
- * array should be %I2C_CLIENT_END.
+ * array should be %I2C_CLIENT_END.
*
* returns a &struct v4l2_subdev pointer.
*/
* @info: pointer to struct i2c_board_info used to replace the irq,
* platform_data and addr arguments.
* @probe_addrs: array with a list of address. The last entry at such
- * array should be %I2C_CLIENT_END.
+ * array should be %I2C_CLIENT_END.
*
* returns a &struct v4l2_subdev pointer.
*/
/**
* v4l2_ctrl_subdev_subscribe_event - Helper function to implement
- * as a &struct v4l2_subdev_core_ops subscribe_event function
+ * as a &struct v4l2_subdev_core_ops subscribe_event function
* that just subscribes control events.
*
* @sd: pointer to &struct v4l2_subdev
* enum v4l2_video_device_flags - Flags used by &struct video_device
*
* @V4L2_FL_REGISTERED:
- * indicates that a &struct video_device is registered.
+ * indicates that a &struct video_device is registered.
* Drivers can clear this flag if they want to block all future
* device access. It is cleared by video_unregister_device.
* @V4L2_FL_USES_V4L2_FH:
/*
* Newer version of video_device, handled by videodev2.c
- * This version moves redundant code from video device code to
+ * This version moves redundant code from video device code to
* the common handler
*/
* @vdev: struct video_device to register
* @type: type of device to register, as defined by &enum vfl_devnode_type
* @nr: which device node number is desired:
- * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
+ * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
* @warn_if_nr_in_use: warn if the desired device node number
* was already in use and another number was chosen instead.
* @owner: module that owns the video device node
* @vdev: struct video_device to register
* @type: type of device to register, as defined by &enum vfl_devnode_type
* @nr: which device node number is desired:
- * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
+ * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
*
* Internally, it calls __video_register_device(). Please see its
* documentation for more details.
*
* .. note::
- * if video_register_device fails, the release() callback of
+ * if video_register_device fails, the release() callback of
* &struct video_device structure is *not* called, so the caller
* is responsible for freeing any data. Usually that means that
* you video_device_release() should be called on failure.
* @vdev: struct video_device to register
* @type: type of device to register, as defined by &enum vfl_devnode_type
* @nr: which device node number is desired:
- * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
+ * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free)
*
* This function is identical to video_register_device() except that no
* warning is issued if the desired device node number was already in use.
* documentation for more details.
*
* .. note::
- * if video_register_device fails, the release() callback of
+ * if video_register_device fails, the release() callback of
* &struct video_device structure is *not* called, so the caller
* is responsible for freeing any data. Usually that means that
* you video_device_release() should be called on failure.
/**
* video_device_release_empty - helper function to implement the
- * video_device->release\(\) callback.
+ * video_device->release\(\) callback.
*
* @vdev: pointer to &struct video_device
*
struct v4l2_event_subscription *sub);
/**
* v4l2_src_change_event_subscribe - helper function that calls
- * v4l2_event_subscribe() if the event is %V4L2_EVENT_SOURCE_CHANGE.
+ * v4l2_event_subscribe() if the event is %V4L2_EVENT_SOURCE_CHANGE.
*
* @fh: pointer to struct v4l2_fh
* @sub: pointer to &struct v4l2_event_subscription
* @V4L2_SUBDEV_IO_PIN_OUTPUT: set it if pin is an output.
* @V4L2_SUBDEV_IO_PIN_INPUT: set it if pin is an input.
* @V4L2_SUBDEV_IO_PIN_SET_VALUE: to set the output value via
- * &struct v4l2_subdev_io_pin_config->value.
+ * &struct v4l2_subdev_io_pin_config->value.
* @V4L2_SUBDEV_IO_PIN_ACTIVE_LOW: pin active is bit 0.
* Otherwise, ACTIVE HIGH is assumed.
*/
*
* .. note::
*
- * On devices that have both AM/FM and TV, it is up to the driver
+ * On devices that have both AM/FM and TV, it is up to the driver
* to explicitly call s_radio when the tuner should be switched to
* radio mode, before handling other &struct v4l2_subdev_tuner_ops
* that would require it. An example of such usage is::
*
* static void s_frequency(void *priv, const struct v4l2_frequency *f)
* {
- * ...
+ * ...
* if (f.type == V4L2_TUNER_RADIO)
* v4l2_device_call_all(v4l2_dev, 0, tuner, s_radio);
* ...
*
* @flags: bitmask flags, as defined by &enum v4l2_mbus_frame_desc_flags.
* @pixelcode: media bus pixel code, valid if @flags
- * %FRAME_DESC_FL_BLOB is not set.
+ * %FRAME_DESC_FL_BLOB is not set.
* @length: number of octets per frame, valid if @flags
* %V4L2_MBUS_FRAME_DESC_FL_LEN_MAX is set.
*/
OSDN Git Service
