arm64: dts: renesas: r8a77965: Add R-Car Gen3 thermal support

Based on previous work by Ryo Kataoka <ryo.kataoka.wt@renesas.com>.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[simon: moved thermal node to preseve ordering of nodes by bus address]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 536fed8..b93281a 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -282,6 +282,21 @@
                        #power-domain-cells = <1>;
                };
 
+               tsc: thermal@e6198000 {
+                       compatible = "renesas,r8a77965-thermal";
+                       reg = <0 0xe6198000 0 0x100>,
+                             <0 0xe61a0000 0 0x100>,
+                             <0 0xe61a8000 0 0x100>;
+                       interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&cpg CPG_MOD 522>;
+                       power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+                       resets = <&cpg 522>;
+                       #thermal-sensor-cells = <1>;
+                       status = "okay";
+               };
+
                intc_ex: interrupt-controller@e61c0000 {
                        compatible = "renesas,intc-ex-r8a77965", "renesas,irqc";
                        #interrupt-cells = <2>;
@@ -1192,6 +1207,50 @@
                                      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
        };
 
+       thermal-zones {
+               sensor_thermal1: sensor-thermal1 {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+                       thermal-sensors = <&tsc 0>;
+
+                       trips {
+                               sensor1_crit: sensor1-crit {
+                                       temperature = <120000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               sensor_thermal2: sensor-thermal2 {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+                       thermal-sensors = <&tsc 1>;
+
+                       trips {
+                               sensor2_crit: sensor2-crit {
+                                       temperature = <120000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               sensor_thermal3: sensor-thermal3 {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+                       thermal-sensors = <&tsc 2>;
+
+                       trips {
+                               sensor3_crit: sensor3-crit {
+                                       temperature = <120000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+       };
+
        /* External USB clocks - can be overridden by the board */
        usb3s0_clk: usb3s0 {
                compatible = "fixed-clock";