{0x02, 0x1F}, /* 0x57, RT_CHANNEL_DOMAIN_FCC1_FCC10 */
};
-static RT_CHANNEL_PLAN_MAP RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02}; /* use the combination for max channel numbers */
+ /* use the combination for max channel numbers */
+static RT_CHANNEL_PLAN_MAP RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02};
-/*
- * Search the @param ch in given @param ch_set
+/* Search the @param ch in given @param ch_set
* @ch_set: the given channel set
* @ch: the given channel number
*
return i;
}
-/*
- * Check the @param ch is fit with setband setting of @param adapter
+/* Check the @param ch is fit with setband setting of @param adapter
* @adapter: the given adapter
* @ch: the given channel number
*
(!memcmp(pIE->data, WPS_OUI, 4))) {
vs_ie_length = pIE->Length;
if ((!padapter->registrypriv.wifi_spec) && (!memcmp(pIE->data, WPS_OUI, 4))) {
- /* Commented by Kurt 20110629 */
- /* In some older APs, WPS handshake */
- /* would be fail if we append vender extensions information to AP */
+ /* Commented by Kurt 20110629
+ * In some older APs, WPS handshake
+ * would be fail if we append vendor
+ * extensions information to AP
+ */
vs_ie_length = 14;
}
/* set_opmode_cmd(padapter, infra_client_with_mlme); */
- /*
- * For safety, prevent from keeping macid sleep.
+ /* For safety, prevent from keeping macid sleep.
* If we can sure all power mode enter/leave are paired,
* this check can be removed.
* Lucas@20131113
Save_DM_Func_Flag(padapter);
Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false);
- /* config the initial gain under scanning, need to write the BB registers */
+ /* config the initial gain under scanning, need to write the BB
+ * registers
+ */
initialgain = 0x1e;
rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));
// SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
+/*****************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
/* if (RFPath == ODM_RF_PATH_A) */
switch (RFPath) {
case ODM_RF_PATH_A:
- /* write new elements A, C, D to regC80 and regC94, element B is always 0 */
+ /* write new elements A, C, D to regC80 and regC94,
+ * element B is always 0
+ */
value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XATxIQImbalance, bMaskDWord, value32);
PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_ECCAThreshold, BIT24, value32);
break;
case ODM_RF_PATH_B:
- /* write new elements A, C, D to regC88 and regC9C, element B is always 0 */
+ /* write new elements A, C, D to regC88 and regC9C,
+ * element B is always 0
+ */
value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord, value32);
if (bmcst)
ptxdesc->bmc = 1;
- /* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
- /* (1) The sequence number of each non-Qos frame / broadcast / multicast / */
- /* mgnt frame should be controlled by Hw because Fw will also send null data */
- /* which we cannot control when Fw LPS enable. */
- /* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
- /* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
- /* (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets. */
- /* 2010.06.23. Added by tynli. */
+ /* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS.
+ * (1) The sequence number of each non-Qos frame / broadcast /
+ * multicast / mgnt frame should be controlled by Hw because Fw
+ * will also send null data which we cannot control when Fw LPS
+ * enable.
+ * --> default enable non-Qos data sequense number. 2010.06.23.
+ * by tynli.
+ * (2) Enable HW SEQ control for beacon packet, because we use
+ * Hw beacon.
+ * (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos
+ * packets.
+ * 2010.06.23. Added by tynli.
+ */
if (!pattrib->qos_en) /* Hw set sequence number */
ptxdesc->en_hwseq = 1; /* HWSEQ_EN */
}
-/*
- *Description:
+/* Description:
*
- *Parameters:
+ * Parameters:
* pxmitframe xmitframe
* pbuf where to fill tx desc
*/
}
}
-/*
- *Description:
+/* Description:
* Change default setting of specified variable.
*/
u8 SetHalDefVar8723B(struct adapter *padapter, enum HAL_DEF_VARIABLE variable, void *pval)
return bResult;
}
-/*
- *Description:
+/* Description:
* Query setting of specified variable.
*/
u8 GetHalDefVar8723B(struct adapter *padapter, enum HAL_DEF_VARIABLE variable, void *pval)