net: dsa: rtl8366: Properly clear member config

When removing a port from a VLAN we are just erasing the
member config for the VLAN, which is wrong: other ports
can be using it.

Just mask off the port and only zero out the rest of the
member config once ports using of the VLAN are removed
from it.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 8f40fbf..a8c5a93 100644 (file)
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -452,13 +452,19 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
                                return ret;
 
                        if (vid == vlanmc.vid) {
-                               /* clear VLAN member configurations */
-                               vlanmc.vid = 0;
-                               vlanmc.priority = 0;
-                               vlanmc.member = 0;
-                               vlanmc.untag = 0;
-                               vlanmc.fid = 0;
-
+                               /* Remove this port from the VLAN */
+                               vlanmc.member &= ~BIT(port);
+                               vlanmc.untag &= ~BIT(port);
+                               /*
+                                * If no ports are members of this VLAN
+                                * anymore then clear the whole member
+                                * config so it can be reused.
+                                */
+                               if (!vlanmc.member && vlanmc.untag) {
+                                       vlanmc.vid = 0;
+                                       vlanmc.priority = 0;
+                                       vlanmc.fid = 0;
+                               }
                                ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
                                if (ret) {
                                        dev_err(smi->dev,