* @txctl: transmit a control request message to dongle.
* @rxctl: receive a control response message from dongle.
* @gettxq: obtain a reference of bus transmit queue (optional).
+ * @wowl_config: specify if dongle is configured for wowl when going to suspend
*
* This structure provides an abstract interface towards the
* bus specific driver. For control messages to common driver
int (*txctl)(struct device *dev, unsigned char *msg, uint len);
int (*rxctl)(struct device *dev, unsigned char *msg, uint len);
struct pktq * (*gettxq)(struct device *dev);
+ void (*wowl_config)(struct device *dev, bool enabled);
};
* @dstats: dongle-based statistical data.
* @dcmd_list: bus/device specific dongle initialization commands.
* @chip: device identifier of the dongle chip.
+ * @wowl_supported: is wowl supported by bus driver.
* @chiprev: revision of the dongle chip.
*/
struct brcmf_bus {
u32 chip;
u32 chiprev;
bool always_use_fws_queue;
+ bool wowl_supported;
struct brcmf_bus_ops *ops;
struct brcmf_bus_msgbuf *msgbuf;
return bus->ops->gettxq(bus->dev);
}
+static inline
+void brcmf_bus_wowl_config(struct brcmf_bus *bus, bool enabled)
+{
+ if (bus->ops->wowl_config)
+ bus->ops->wowl_config(bus->dev, enabled);
+}
+
static inline bool brcmf_bus_ready(struct brcmf_bus *bus)
{
return bus->state == BRCMF_BUS_LOAD || bus->state == BRCMF_BUS_DATA;
struct brcmf_if *ifp = drvr->iflist[0];
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
+ if (drvr->bus_if->wowl_supported)
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
/* set chip related quirks */
switch (drvr->bus_if->chip) {
* MCHAN: multi-channel for concurrent P2P.
*/
#define BRCMF_FEAT_LIST \
- BRCMF_FEAT_DEF(MCHAN)
+ BRCMF_FEAT_DEF(MCHAN) \
+ BRCMF_FEAT_DEF(WOWL)
/*
* Quirks:
*
#define BRCMF_OBSS_COEX_OFF 0
#define BRCMF_OBSS_COEX_ON 1
+/* WOWL bits */
+/* Wakeup on Magic packet: */
+#define WL_WOWL_MAGIC (1 << 0)
+/* Wakeup on Netpattern */
+#define WL_WOWL_NET (1 << 1)
+/* Wakeup on loss-of-link due to Disassoc/Deauth: */
+#define WL_WOWL_DIS (1 << 2)
+/* Wakeup on retrograde TSF: */
+#define WL_WOWL_RETR (1 << 3)
+/* Wakeup on loss of beacon: */
+#define WL_WOWL_BCN (1 << 4)
+/* Wakeup after test: */
+#define WL_WOWL_TST (1 << 5)
+/* Wakeup after PTK refresh: */
+#define WL_WOWL_M1 (1 << 6)
+/* Wakeup after receipt of EAP-Identity Req: */
+#define WL_WOWL_EAPID (1 << 7)
+/* Wakeind via PME(0) or GPIO(1): */
+#define WL_WOWL_PME_GPIO (1 << 8)
+/* need tkip phase 1 key to be updated by the driver: */
+#define WL_WOWL_NEEDTKIP1 (1 << 9)
+/* enable wakeup if GTK fails: */
+#define WL_WOWL_GTK_FAILURE (1 << 10)
+/* support extended magic packets: */
+#define WL_WOWL_EXTMAGPAT (1 << 11)
+/* support ARP/NS/keepalive offloading: */
+#define WL_WOWL_ARPOFFLOAD (1 << 12)
+/* read protocol version for EAPOL frames: */
+#define WL_WOWL_WPA2 (1 << 13)
+/* If the bit is set, use key rotaton: */
+#define WL_WOWL_KEYROT (1 << 14)
+/* If the bit is set, frm received was bcast frame: */
+#define WL_WOWL_BCAST (1 << 15)
+/* If the bit is set, scan offload is enabled: */
+#define WL_WOWL_SCANOL (1 << 16)
+/* Wakeup on tcpkeep alive timeout: */
+#define WL_WOWL_TCPKEEP_TIME (1 << 17)
+/* Wakeup on mDNS Conflict Resolution: */
+#define WL_WOWL_MDNS_CONFLICT (1 << 18)
+/* Wakeup on mDNS Service Connect: */
+#define WL_WOWL_MDNS_SERVICE (1 << 19)
+/* tcp keepalive got data: */
+#define WL_WOWL_TCPKEEP_DATA (1 << 20)
+/* Firmware died in wowl mode: */
+#define WL_WOWL_FW_HALT (1 << 21)
+/* Enable detection of radio button changes: */
+#define WL_WOWL_ENAB_HWRADIO (1 << 22)
+/* Offloads detected MIC failure(s): */
+#define WL_WOWL_MIC_FAIL (1 << 23)
+/* Wakeup in Unassociated state (Net/Magic Pattern): */
+#define WL_WOWL_UNASSOC (1 << 24)
+/* Wakeup if received matched secured pattern: */
+#define WL_WOWL_SECURE (1 << 25)
+/* Link Down indication in WoWL mode: */
+#define WL_WOWL_LINKDOWN (1 << 31)
+
/* join preference types for join_pref iovar */
enum brcmf_join_pref_types {
BRCMF_JOIN_PREF_RSSI = 1,
#define BRCMF_H2D_HOST_D3_INFORM 0x00000001
#define BRCMF_H2D_HOST_DS_ACK 0x00000002
+#define BRCMF_H2D_HOST_D0_INFORM_IN_USE 0x00000008
+#define BRCMF_H2D_HOST_D0_INFORM 0x00000010
#define BRCMF_PCIE_MBDATA_TIMEOUT 2000
wait_queue_head_t mbdata_resp_wait;
bool mbdata_completed;
bool irq_allocated;
+ bool wowl_enabled;
};
struct brcmf_pcie_ringbuf {
}
-static void
+static int
brcmf_pcie_send_mb_data(struct brcmf_pciedev_info *devinfo, u32 htod_mb_data)
{
struct brcmf_pcie_shared_info *shared;
msleep(10);
i++;
if (i > 100)
- break;
+ return -EIO;
cur_htod_mb_data = brcmf_pcie_read_tcm32(devinfo, addr);
}
brcmf_pcie_write_tcm32(devinfo, addr, htod_mb_data);
pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
pci_write_config_dword(devinfo->pdev, BRCMF_PCIE_REG_SBMBX, 1);
+
+ return 0;
}
}
+static void brcmf_pcie_wowl_config(struct device *dev, bool enabled)
+{
+ struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+ struct brcmf_pciedev *buspub = bus_if->bus_priv.pcie;
+ struct brcmf_pciedev_info *devinfo = buspub->devinfo;
+
+ brcmf_dbg(PCIE, "Configuring WOWL, enabled=%d\n", enabled);
+ devinfo->wowl_enabled = enabled;
+ if (enabled)
+ device_set_wakeup_enable(&devinfo->pdev->dev, true);
+ else
+ device_set_wakeup_enable(&devinfo->pdev->dev, false);
+}
+
+
static struct brcmf_bus_ops brcmf_pcie_bus_ops = {
.txdata = brcmf_pcie_tx,
.stop = brcmf_pcie_down,
.txctl = brcmf_pcie_tx_ctlpkt,
.rxctl = brcmf_pcie_rx_ctlpkt,
+ .wowl_config = brcmf_pcie_wowl_config,
};
bus->ops = &brcmf_pcie_bus_ops;
bus->proto_type = BRCMF_PROTO_MSGBUF;
bus->chip = devinfo->coreid;
+ bus->wowl_supported = pci_pme_capable(pdev, PCI_D3hot);
dev_set_drvdata(&pdev->dev, bus);
ret = brcmf_pcie_get_fwnames(devinfo);
brcmf_err("Timeout on response for entering D3 substate\n");
return -EIO;
}
- brcmf_pcie_release_irq(devinfo);
+ brcmf_pcie_send_mb_data(devinfo, BRCMF_H2D_HOST_D0_INFORM_IN_USE);
err = pci_save_state(pdev);
- if (err) {
+ if (err)
brcmf_err("pci_save_state failed, err=%d\n", err);
- return err;
+ if ((err) || (!devinfo->wowl_enabled)) {
+ brcmf_chip_detach(devinfo->ci);
+ devinfo->ci = NULL;
+ brcmf_pcie_remove(pdev);
+ return 0;
}
- brcmf_chip_detach(devinfo->ci);
- devinfo->ci = NULL;
-
- brcmf_pcie_remove(pdev);
-
return pci_prepare_to_sleep(pdev);
}
-
static int brcmf_pcie_resume(struct pci_dev *pdev)
{
+ struct brcmf_pciedev_info *devinfo;
+ struct brcmf_bus *bus;
int err;
- brcmf_dbg(PCIE, "Enter, pdev=%p\n", pdev);
+ bus = dev_get_drvdata(&pdev->dev);
+ brcmf_dbg(PCIE, "Enter, pdev=%p, bus=%p\n", pdev, bus);
err = pci_set_power_state(pdev, PCI_D0);
if (err) {
brcmf_err("pci_set_power_state failed, err=%d\n", err);
- return err;
+ goto cleanup;
}
pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D3hot, false);
+ pci_enable_wake(pdev, PCI_D3cold, false);
+
+ /* Check if device is still up and running, if so we are ready */
+ if (bus) {
+ devinfo = bus->bus_priv.pcie->devinfo;
+ if (brcmf_pcie_read_reg32(devinfo,
+ BRCMF_PCIE_PCIE2REG_INTMASK) != 0) {
+ if (brcmf_pcie_send_mb_data(devinfo,
+ BRCMF_H2D_HOST_D0_INFORM))
+ goto cleanup;
+ brcmf_dbg(PCIE, "Hot resume, continue....\n");
+ brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
+ brcmf_bus_change_state(bus, BRCMF_BUS_DATA);
+ brcmf_pcie_intr_enable(devinfo);
+ return 0;
+ }
+ }
+cleanup:
+ if (bus) {
+ devinfo = bus->bus_priv.pcie->devinfo;
+ brcmf_chip_detach(devinfo->ci);
+ devinfo->ci = NULL;
+ brcmf_pcie_remove(pdev);
+ }
err = brcmf_pcie_probe(pdev, NULL);
if (err)
brcmf_err("probe after resume failed, err=%d\n", err);
#include "fwil.h"
#include "proto.h"
#include "vendor.h"
+#include "dhd_bus.h"
#define BRCMF_SCAN_IE_LEN_MAX 2048
#define BRCMF_PNO_VERSION 2
static s32 brcmf_cfg80211_resume(struct wiphy *wiphy)
{
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct net_device *ndev = cfg_to_ndev(cfg);
+ struct brcmf_if *ifp = netdev_priv(ndev);
+
brcmf_dbg(TRACE, "Enter\n");
+ if (cfg->wowl_enabled) {
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM,
+ cfg->pre_wowl_pmmode);
+ brcmf_fil_iovar_data_set(ifp, "wowl_pattern", "clr", 4);
+ brcmf_fil_iovar_int_set(ifp, "wowl_clear", 0);
+ cfg->wowl_enabled = false;
+ }
return 0;
}
+static void brcmf_configure_wowl(struct brcmf_cfg80211_info *cfg,
+ struct brcmf_if *ifp,
+ struct cfg80211_wowlan *wowl)
+{
+ u32 wowl_config;
+
+ brcmf_dbg(TRACE, "Suspend, wowl config.\n");
+
+ brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PM, &cfg->pre_wowl_pmmode);
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, PM_MAX);
+
+ wowl_config = 0;
+ if (wowl->disconnect)
+ wowl_config |= WL_WOWL_DIS | WL_WOWL_BCN | WL_WOWL_RETR;
+ /* Note: if "wowl" target and not "wowlpf" then wowl_bcn_loss
+ * should be configured. This paramater is not supported by
+ * wowlpf.
+ */
+ if (wowl->magic_pkt)
+ wowl_config |= WL_WOWL_MAGIC;
+ brcmf_fil_iovar_int_set(ifp, "wowl", wowl_config);
+ brcmf_fil_iovar_int_set(ifp, "wowl_activate", 1);
+ brcmf_bus_wowl_config(cfg->pub->bus_if, true);
+ cfg->wowl_enabled = true;
+}
+
static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy,
- struct cfg80211_wowlan *wow)
+ struct cfg80211_wowlan *wowl)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct net_device *ndev = cfg_to_ndev(cfg);
+ struct brcmf_if *ifp = netdev_priv(ndev);
struct brcmf_cfg80211_vif *vif;
brcmf_dbg(TRACE, "Enter\n");
- /*
- * if the primary net_device is not READY there is nothing
+ /* if the primary net_device is not READY there is nothing
* we can do but pray resume goes smoothly.
*/
- vif = ((struct brcmf_if *)netdev_priv(ndev))->vif;
- if (!check_vif_up(vif))
+ if (!check_vif_up(ifp->vif))
goto exit;
- list_for_each_entry(vif, &cfg->vif_list, list) {
- if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state))
- continue;
- /*
- * While going to suspend if associated with AP disassociate
- * from AP to save power while system is in suspended state
- */
- brcmf_link_down(vif);
-
- /* Make sure WPA_Supplicant receives all the event
- * generated due to DISASSOC call to the fw to keep
- * the state fw and WPA_Supplicant state consistent
- */
- brcmf_delay(500);
- }
-
/* end any scanning */
if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status))
brcmf_abort_scanning(cfg);
- /* Turn off watchdog timer */
- brcmf_set_mpc(netdev_priv(ndev), 1);
+ if (wowl == NULL) {
+ brcmf_bus_wowl_config(cfg->pub->bus_if, false);
+ list_for_each_entry(vif, &cfg->vif_list, list) {
+ if (!test_bit(BRCMF_VIF_STATUS_READY, &vif->sme_state))
+ continue;
+ /* While going to suspend if associated with AP
+ * disassociate from AP to save power while system is
+ * in suspended state
+ */
+ brcmf_link_down(vif);
+ /* Make sure WPA_Supplicant receives all the event
+ * generated due to DISASSOC call to the fw to keep
+ * the state fw and WPA_Supplicant state consistent
+ */
+ brcmf_delay(500);
+ }
+ /* Configure MPC */
+ brcmf_set_mpc(ifp, 1);
+
+ } else {
+ /* Configure WOWL paramaters */
+ brcmf_configure_wowl(cfg, ifp, wowl);
+ }
exit:
brcmf_dbg(TRACE, "Exit\n");
wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
}
+
+#ifdef CONFIG_PM
+static const struct wiphy_wowlan_support brcmf_wowlan_support = {
+ .flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
+};
+#endif
+
+static void brcmf_wiphy_wowl_params(struct wiphy *wiphy)
+{
+#ifdef CONFIG_PM
+ /* wowl settings */
+ wiphy->wowlan = &brcmf_wowlan_support;
+#endif
+}
+
static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
{
struct ieee80211_iface_combination ifc_combo;
wiphy->vendor_commands = brcmf_vendor_cmds;
wiphy->n_vendor_commands = BRCMF_VNDR_CMDS_LAST - 1;
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL))
+ brcmf_wiphy_wowl_params(wiphy);
+
return brcmf_setup_wiphybands(wiphy);
}
* @vif_list: linked list of vif instances.
* @vif_cnt: number of vif instances.
* @vif_event: vif event signalling.
+ * @wowl_enabled; set during suspend, is wowl used.
+ * @pre_wowl_pmmode: intermediate storage of pm mode during wowl.
*/
struct brcmf_cfg80211_info {
struct wiphy *wiphy;
struct brcmf_cfg80211_vif_event vif_event;
struct completion vif_disabled;
struct brcmu_d11inf d11inf;
+ bool wowl_enabled;
+ u32 pre_wowl_pmmode;
};
/**
#define BRCM_BAND_2G 2 /* 2.4 Ghz */
#define BRCM_BAND_ALL 3 /* all bands */
-/* Values for PM */
-#define PM_OFF 0
-#define PM_MAX 1
-
/* Debug levels */
#define BRCM_DL_INFO 0x00000001
#define BRCM_DL_MAC80211 0x00000002
#define BRCM_DL_DMA 0x00000020
#define BRCM_DL_HT 0x00000040
+/* Values for PM */
#define PM_OFF 0
#define PM_MAX 1
#define PM_FAST 2
OSDN Git Service
