AMD processors have events with event select codes and unit masks larger
than a byte. The core PMU, for example, uses 12-bit event select codes
split between bits 0-7 and 32-35 of the PERF_CTL MSRs as can be seen
from /sys/bus/event_sources/devices/cpu/format/*.
The Processor Programming Reference (PPR) lists the event codes as
unified 12-bit hexadecimal values instead and the split between the bits
is not apparent to someone who is not aware of the layout of the
PERF_CTL MSRs.
8-bit event select codes continue to work as the layout matches that of
the PERF_CTL MSRs i.e. bits 0-7 for event select and 8-15 for unit mask.
This adds more details in the perf man pages about using
/sys/bus/event_sources/devices/*/format/* for determining the correct
raw event encoding scheme.
E.g. the "op_cache_hit_miss.op_cache_hit" event with code 0x28f and
umask 0x03 can be programmed using its symbolic name as:
$ sudo perf --debug perf-event-open stat -e op_cache_hit_miss.op_cache_hit sleep 1
------------------------------------------------------------
perf_event_attr:
type 4
size 128
config 0x20000038f
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
[...]
One might use a simple eventsel+umask combination based on what the
current man pages say and incorrectly program the event as:
$ sudo perf --debug perf-event-open stat -e r0328f sleep 1
------------------------------------------------------------
perf_event_attr:
type 4
size 128
config 0x328f
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
[...]
When it should have been based on the format from sysfs:
$ cat /sys/bus/event_source/devices/cpu/format/event
config:0-7,32-35
$ sudo perf --debug perf-event-open stat -e r20000038f sleep 1
------------------------------------------------------------
perf_event_attr:
type 4
size 128
config 0x20000038f
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
[...]
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Robert Richter <rrichter@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Link: https://lore.kernel.org/r/20211123084613.243792-1-sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even when an event is not available in a symbolic form within perf right now,
it can be encoded in a per processor specific way.
-For instance For x86 CPUs NNN represents the raw register encoding with the
+For instance on x86 CPUs, N is a hexadecimal value that represents the raw register encoding with the
layout of IA32_PERFEVTSELx MSRs (see [Intel® 64 and IA-32 Architectures Software Developer's Manual Volume 3B: System Programming Guide] Figure 30-1 Layout
of IA32_PERFEVTSELx MSRs) or AMD's PerfEvtSeln (see [AMD64 Architecture Programmer’s Manual Volume 2: System Programming], Page 344,
Figure 13-7 Performance Event-Select Register (PerfEvtSeln)).
perf record -e cpu/r1a8/ ...
perf record -e cpu/r0x1a8/ ...
+Some processors, like those from AMD, support event codes and unit masks
+larger than a byte. In such cases, the bits corresponding to the event
+configuration parameters can be seen with:
+
+ cat /sys/bus/event_source/devices/<pmu>/format/<config>
+
+Example:
+
+If the AMD docs for an EPYC 7713 processor describe an event as:
+
+ Event Umask Event Mask
+ Num. Value Mnemonic Description
+
+ 28FH 03H op_cache_hit_miss.op_cache_hit Counts Op Cache micro-tag
+ hit events.
+
+raw encoding of 0x0328F cannot be used since the upper nibble of the
+EventSelect bits have to be specified via bits 32-35 as can be seen with:
+
+ cat /sys/bus/event_source/devices/cpu/format/event
+
+raw encoding of 0x20000038F should be used instead:
+
+ perf stat -e r20000038f -a sleep 1
+ perf record -e r20000038f ...
+
+It's also possible to use pmu syntax:
+
+ perf record -e r20000038f -a sleep 1
+ perf record -e cpu/r20000038f/ ...
+ perf record -e cpu/r0x20000038f/ ...
+
You should refer to the processor specific documentation for getting these
details. Some of them are referenced in the SEE ALSO section below.
- a symbolic event name (use 'perf list' to list all events)
- - a raw PMU event (eventsel+umask) in the form of rNNN where NNN is a
- hexadecimal event descriptor.
+ - a raw PMU event in the form of rN where N is a hexadecimal value
+ that represents the raw register encoding with the layout of the
+ event control registers as described by entries in
+ /sys/bus/event_sources/devices/cpu/format/*.
- a symbolic or raw PMU event followed by an optional colon
and a list of event modifiers, e.g., cpu-cycles:p. See the
- a symbolic event name (use 'perf list' to list all events)
- - a raw PMU event (eventsel+umask) in the form of rNNN where NNN is a
- hexadecimal event descriptor.
+ - a raw PMU event in the form of rN where N is a hexadecimal value
+ that represents the raw register encoding with the layout of the
+ event control registers as described by entries in
+ /sys/bus/event_sources/devices/cpu/format/*.
- a symbolic or raw PMU event followed by an optional colon
and a list of event modifiers, e.g., cpu-cycles:p. See the
-e <event>::
--event=<event>::
Select the PMU event. Selection can be a symbolic event name
- (use 'perf list' to list all events) or a raw PMU
- event (eventsel+umask) in the form of rNNN where NNN is a
- hexadecimal event descriptor.
+ (use 'perf list' to list all events) or a raw PMU event in the form
+ of rN where N is a hexadecimal value that represents the raw register
+ encoding with the layout of the event control registers as described
+ by entries in /sys/bus/event_sources/devices/cpu/format/*.
-E <entries>::
--entries=<entries>::
OSDN Git Service
