MIPS: Netlogic: Remove memory section from built-in DT

Do not pass a memory section in the built-in DTB, and let the
boot code use the values from the DRAM BARs.

Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5699/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts
index 0640703..7862a6f 100644 (file)
--- a/arch/mips/netlogic/dts/xlp_evp.dts
+++ b/arch/mips/netlogic/dts/xlp_evp.dts
@@ -9,13 +9,6 @@
        #address-cells = <2>;
        #size-cells = <2>;
 
-       memory {
-               device_type = "memory";
-               reg =  <0 0x00100000 0 0x0FF00000       // 255M at 1M
-                       0 0x20000000 0 0xa0000000       // 2560M at 512M
-                       0 0xe0000000 1 0x00000000>;
-       };
-
        soc {
                #address-cells = <2>;
                #size-cells = <1>;

diff --git a/arch/mips/netlogic/dts/xlp_svp.dts b/arch/mips/netlogic/dts/xlp_svp.dts
index 9c5db10..5aba17e 100644 (file)
--- a/arch/mips/netlogic/dts/xlp_svp.dts
+++ b/arch/mips/netlogic/dts/xlp_svp.dts
@@ -9,13 +9,6 @@
        #address-cells = <2>;
        #size-cells = <2>;
 
-       memory {
-               device_type = "memory";
-               reg =  <0 0x00100000 0 0x0FF00000       // 255M at 1M
-                       0 0x20000000 0 0xa0000000       // 2560M at 512M
-                       0 0xe0000000 0 0x40000000>;
-       };
-
        soc {
                #address-cells = <2>;
                #size-cells = <1>;