}
/* ATAPI DMA support */
-/* XXX: handle read errors */
static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
{
IDEState *s = opaque;
int data_offset, n;
if (ret < 0) {
- ide_atapi_io_error(s, ret);
- goto eot;
+ if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) {
+ if (s->bus->error_status) {
+ return;
+ }
+ goto eot;
+ }
}
if (s->io_buffer_size > 0) {
}
}
-
-/* Called by *_restart_bh when the transfer function points
- * to ide_atapi_cmd
- */
void ide_atapi_dma_restart(IDEState *s)
{
/*
{ 190, 0x03, 0x00, 0x45, 0x45, 0x1f, 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x32},
};
-static int ide_handle_rw_error(IDEState *s, int error, int op);
static void ide_dummy_transfer_stop(IDEState *s);
static void padstr(char *str, const char *src, int len)
ide_set_irq(s->bus);
}
-static int ide_handle_rw_error(IDEState *s, int error, int op)
+int ide_handle_rw_error(IDEState *s, int error, int op)
{
bool is_read = (op & IDE_RETRY_READ) != 0;
BlockErrorAction action = blk_get_error_action(s->blk, is_read, error);
s->bus->error_status = op;
} else if (action == BLOCK_ERROR_ACTION_REPORT) {
block_acct_failed(blk_get_stats(s->blk), &s->acct);
- if (op & IDE_RETRY_DMA) {
+ if (IS_IDE_RETRY_DMA(op)) {
ide_dma_error(s);
+ } else if (IS_IDE_RETRY_ATAPI(op)) {
+ ide_atapi_io_error(s, -error);
} else {
ide_rw_error(s);
}
ide_issue_trim, ide_dma_cb, s,
DMA_DIRECTION_TO_DEVICE);
break;
+ default:
+ abort();
}
return;
s->status = READY_STAT | SEEK_STAT;
s->atapi_dma = s->feature & 1;
+ if (s->atapi_dma) {
+ s->dma_cmd = IDE_DMA_ATAPI;
+ }
s->nsector = 1;
ide_transfer_start(s, s->io_buffer, ATAPI_PACKET_SIZE,
ide_atapi_cmd);
if (s->bus->dma->ops->restart) {
s->bus->dma->ops->restart(s->bus->dma);
}
- }
-
- if (error_status & IDE_RETRY_DMA) {
+ } else if (IS_IDE_RETRY_DMA(error_status)) {
if (error_status & IDE_RETRY_TRIM) {
ide_restart_dma(s, IDE_DMA_TRIM);
} else {
ide_restart_dma(s, is_read ? IDE_DMA_READ : IDE_DMA_WRITE);
}
- } else if (error_status & IDE_RETRY_PIO) {
+ } else if (IS_IDE_RETRY_PIO(error_status)) {
if (is_read) {
ide_sector_read(s);
} else {
}
} else if (error_status & IDE_RETRY_FLUSH) {
ide_flush_cache(s);
+ } else if (IS_IDE_RETRY_ATAPI(error_status)) {
+ assert(s->end_transfer_func == ide_atapi_cmd);
+ ide_atapi_dma_restart(s);
} else {
- /*
- * We've not got any bits to tell us about ATAPI - but
- * we do have the end_transfer_func that tells us what
- * we're trying to do.
- */
- if (s->end_transfer_func == ide_atapi_cmd) {
- ide_atapi_dma_restart(s);
- }
+ abort();
}
}
IDE_DMA_READ,
IDE_DMA_WRITE,
IDE_DMA_TRIM,
+ IDE_DMA_ATAPI,
};
#define ide_cmd_is_read(s) \
};
/* These are used for the error_status field of IDEBus */
+#define IDE_RETRY_MASK 0xf8
#define IDE_RETRY_DMA 0x08
#define IDE_RETRY_PIO 0x10
+#define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
#define IDE_RETRY_READ 0x20
#define IDE_RETRY_FLUSH 0x40
#define IDE_RETRY_TRIM 0x80
#define IDE_RETRY_HBA 0x100
+#define IS_IDE_RETRY_DMA(_status) \
+ ((_status) & IDE_RETRY_DMA)
+
+#define IS_IDE_RETRY_PIO(_status) \
+ ((_status) & IDE_RETRY_PIO)
+
+/*
+ * The method of the IDE_RETRY_ATAPI determination is to use a previously
+ * impossible bit combination as a new status value.
+ */
+#define IS_IDE_RETRY_ATAPI(_status) \
+ (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI)
+
static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd)
{
switch (dma_cmd) {
return IDE_RETRY_DMA;
case IDE_DMA_TRIM:
return IDE_RETRY_DMA | IDE_RETRY_TRIM;
+ case IDE_DMA_ATAPI:
+ return IDE_RETRY_ATAPI;
default:
break;
}
int bus_id, int max_units);
IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
+int ide_handle_rw_error(IDEState *s, int error, int op);
+
#endif /* HW_IDE_INTERNAL_H */