qed: Fix populating the invalid stag value in multi function mode.

In multi-function mode, driver receives the stag value (outer vlan)
for a PF from management FW (MFW). If the stag value is negotiated prior to
the driver load, then the stag is not notified to the driver and hence
driver will have the invalid stag value.
The fix is to request the MFW for STAG value during the driver load time.

Fixes: cac6f691 ("qed: Add support for Unified Fabric Port")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 016ca8a..97f073f 100644 (file)
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1706,7 +1706,7 @@ static int qed_vf_start(struct qed_hwfn *p_hwfn,
 int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params)
 {
        struct qed_load_req_params load_req_params;
-       u32 load_code, param, drv_mb_param;
+       u32 load_code, resp, param, drv_mb_param;
        bool b_default_mtu = true;
        struct qed_hwfn *p_hwfn;
        int rc = 0, mfw_rc, i;
@@ -1852,6 +1852,19 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params)
 
        if (IS_PF(cdev)) {
                p_hwfn = QED_LEADING_HWFN(cdev);
+
+               /* Get pre-negotiated values for stag, bandwidth etc. */
+               DP_VERBOSE(p_hwfn,
+                          QED_MSG_SPQ,
+                          "Sending GET_OEM_UPDATES command to trigger stag/bandwidth attention handling\n");
+               drv_mb_param = 1 << DRV_MB_PARAM_DUMMY_OEM_UPDATES_OFFSET;
+               rc = qed_mcp_cmd(p_hwfn, p_hwfn->p_main_ptt,
+                                DRV_MSG_CODE_GET_OEM_UPDATES,
+                                drv_mb_param, &resp, &param);
+               if (rc)
+                       DP_NOTICE(p_hwfn,
+                                 "Failed to send GET_OEM_UPDATES attention request\n");
+
                drv_mb_param = STORM_FW_VERSION;
                rc = qed_mcp_cmd(p_hwfn, p_hwfn->p_main_ptt,
                                 DRV_MSG_CODE_OV_UPDATE_STORM_FW_VER,

diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
index 8faceb6..9b3ef00 100644 (file)
--- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
@@ -12414,6 +12414,7 @@ struct public_drv_mb {
 #define DRV_MSG_SET_RESOURCE_VALUE_MSG         0x35000000
 #define DRV_MSG_CODE_OV_UPDATE_WOL              0x38000000
 #define DRV_MSG_CODE_OV_UPDATE_ESWITCH_MODE     0x39000000
+#define DRV_MSG_CODE_GET_OEM_UPDATES            0x41000000
 
 #define DRV_MSG_CODE_BW_UPDATE_ACK             0x32000000
 #define DRV_MSG_CODE_NIG_DRAIN                 0x30000000
@@ -12541,6 +12542,9 @@ struct public_drv_mb {
 #define DRV_MB_PARAM_ESWITCH_MODE_VEB  0x1
 #define DRV_MB_PARAM_ESWITCH_MODE_VEPA 0x2
 
+#define DRV_MB_PARAM_DUMMY_OEM_UPDATES_MASK    0x1
+#define DRV_MB_PARAM_DUMMY_OEM_UPDATES_OFFSET  0
+
 #define DRV_MB_PARAM_SET_LED_MODE_OPER         0x0
 #define DRV_MB_PARAM_SET_LED_MODE_ON           0x1
 #define DRV_MB_PARAM_SET_LED_MODE_OFF          0x2