pinctrl: abx500: force-convert to generic mux bindings

This converts the ABx500 pin controller and all associated device
trees to use the standard, generic mux bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 30f8601..8be3c47 100644 (file)
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -47,8 +47,8 @@
                                        gpio2 {
                                                gpio2_default_mode: gpio2_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio2_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio2_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO2_T9";
@@ -60,8 +60,8 @@
                                        gpio4 {
                                                gpio4_default_mode: gpio4_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio4_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio4_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO4_W2";
@@ -73,8 +73,8 @@
                                        gpio10 {
                                                gpio10_default_mode: gpio10_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio10_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio10_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO10_U17";
@@ -86,8 +86,8 @@
                                        gpio11 {
                                                gpio11_default_mode: gpio11_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio11_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio11_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO11_AA18";
@@ -99,8 +99,8 @@
                                        gpio12 {
                                                gpio12_default_mode: gpio12_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio12_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio12_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO12_U16";
@@ -112,8 +112,8 @@
                                        gpio13 {
                                                gpio13_default_mode: gpio13_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio13_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio13_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO13_W17";
@@ -125,8 +125,8 @@
                                        gpio16 {
                                                gpio16_default_mode: gpio16_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio16_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio16_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO16_F15";
@@ -138,8 +138,8 @@
                                        gpio24 {
                                                gpio24_default_mode: gpio24_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio24_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio24_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO24_T14";
@@ -151,8 +151,8 @@
                                        gpio25 {
                                                gpio25_default_mode: gpio25_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio25_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio25_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO25_R16";
@@ -164,8 +164,8 @@
                                        gpio36 {
                                                gpio36_default_mode: gpio36_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio36_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio36_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO36_A17";
@@ -177,8 +177,8 @@
                                        gpio37 {
                                                gpio37_default_mode: gpio37_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio37_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio37_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO37_E15";
@@ -190,8 +190,8 @@
                                        gpio38 {
                                                gpio38_default_mode: gpio38_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio38_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio38_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO38_C17";
@@ -203,8 +203,8 @@
                                        gpio39 {
                                                gpio39_default_mode: gpio39_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio39_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio39_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO39_E16";
@@ -216,8 +216,8 @@
                                        gpio42 {
                                                gpio42_default_mode: gpio42_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio42_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio42_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO42_U2";
@@ -232,8 +232,8 @@
                                        gpio26 {
                                                gpio26_default_mode: gpio26_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio26_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio26_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO26_M16";
@@ -244,8 +244,8 @@
                                        gpio35 {
                                                gpio35_default_mode: gpio35_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio35_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio35_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO35_W15";
@@ -260,8 +260,8 @@
                                        ycbcr {
                                                ycbcr_default_mode: ycbcr_default {
                                                        default_mux {
-                                                               ste,function = "ycbcr";
-                                                               ste,pins = "ycbcr0123_d_1";
+                                                               function = "ycbcr";
+                                                               groups = "ycbcr0123_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO6_Y18",
@@ -277,8 +277,8 @@
                                        pwm {
                                                pwm_default_mode: pwm_default {
                                                        default_mux {
-                                                               ste,function = "pwmout";
-                                                               ste,pins = "pwmout1_d_1", "pwmout2_d_1";
+                                                               function = "pwmout";
+                                                               groups = "pwmout1_d_1", "pwmout2_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO14_F14",
@@ -292,8 +292,8 @@
                                        adi1 {
                                                adi1_default_mode: adi1_default {
                                                        default_mux {
-                                                               ste,function = "adi1";
-                                                               ste,pins = "adi1_d_1";
+                                                               function = "adi1";
+                                                               groups = "adi1_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO17_P5",
@@ -309,8 +309,8 @@
                                        usbuicc {
                                                usbuicc_default_mode: usbuicc_default {
                                                        default_mux {
-                                                               ste,function = "usbuicc";
-                                                               ste,pins = "usbuicc_d_1";
+                                                               function = "usbuicc";
+                                                               groups = "usbuicc_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO21_H19",
@@ -325,8 +325,8 @@
                                        dmic {
                                                dmic_default_mode: dmic_default {
                                                        default_mux {
-                                                               ste,function = "dmic";
-                                                               ste,pins = "dmic12_d_1",
+                                                               function = "dmic";
+                                                               groups = "dmic12_d_1",
                                                                         "dmic34_d_1",
                                                                         "dmic56_d_1";
                                                        };
@@ -345,8 +345,8 @@
                                        extcpena {
                                                extcpena_default_mode: extcpena_default {
                                                        default_mux {
-                                                               ste,function = "extcpena";
-                                                               ste,pins = "extcpena_d_1";
+                                                               function = "extcpena";
+                                                               groups = "extcpena_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO34_R17";
@@ -359,8 +359,8 @@
                                        modsclsda {
                                                modsclsda_default_mode: modsclsda_default {
                                                        default_mux {
-                                                               ste,function = "modsclsda";
-                                                               ste,pins = "modsclsda_d_1";
+                                                               function = "modsclsda";
+                                                               groups = "modsclsda_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO40_T19",
@@ -376,8 +376,8 @@
                                        sysclkreq2 {
                                                sysclkreq2_default_mode: sysclkreq2_default {
                                                        default_mux {
-                                                               ste,function = "sysclkreq";
-                                                               ste,pins = "sysclkreq2_d_1";
+                                                               function = "sysclkreq";
+                                                               groups = "sysclkreq2_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO1_T10";
@@ -387,8 +387,8 @@
                                                };
                                                sysclkreq2_sleep_mode: sysclkreq2_sleep {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio1_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio1_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO1_T10";
@@ -400,8 +400,8 @@
                                        sysclkreq4 {
                                                sysclkreq4_default_mode: sysclkreq4_default {
                                                        default_mux {
-                                                               ste,function = "sysclkreq";
-                                                               ste,pins = "sysclkreq4_d_1";
+                                                               function = "sysclkreq";
+                                                               groups = "sysclkreq4_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO3_U9";
@@ -411,8 +411,8 @@
                                                };
                                                sysclkreq4_sleep_mode: sysclkreq4_sleep {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio3_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio3_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO3_U9";

diff --git a/arch/arm/boot/dts/ste-href-ab8505.dtsi b/arch/arm/boot/dts/ste-href-ab8505.dtsi
index 6006d62..112053c 100644 (file)
--- a/arch/arm/boot/dts/ste-href-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8505.dtsi
@@ -35,8 +35,8 @@
                                        gpio2 {
                                                gpio2_default_mode: gpio2_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio2_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio2_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO2_R5";
@@ -48,8 +48,8 @@
                                        gpio10 {
                                                gpio10_default_mode: gpio10_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio10_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio10_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO10_B16";
@@ -61,8 +61,8 @@
                                        gpio11 {
                                                gpio11_default_mode: gpio11_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio11_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio11_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO11_B17";
@@ -74,8 +74,8 @@
                                        gpio13 {
                                                gpio13_default_mode: gpio13_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio13_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio13_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO13_D17";
@@ -87,8 +87,8 @@
                                        gpio34 {
                                                gpio34_default_mode: gpio34_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio34_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio34_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO34_H14";
@@ -100,8 +100,8 @@
                                        gpio50 {
                                                gpio50_default_mode: gpio50_default {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio50_d_1";
+                                                               function = "gpio";
+                                                               groups = "gpio50_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO50_L4";
@@ -114,8 +114,8 @@
                                        pwm {
                                                pwm_default_mode: pwm_default {
                                                        default_mux {
-                                                               ste,function = "pwmout";
-                                                               ste,pins = "pwmout1_d_1";
+                                                               function = "pwmout";
+                                                               groups = "pwmout1_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO14_C16";
@@ -128,8 +128,8 @@
                                        adi2 {
                                                adi2_default_mode: adi2_default {
                                                        default_mux {
-                                                               ste,function = "adi2";
-                                                               ste,pins = "adi2_d_1";
+                                                               function = "adi2";
+                                                               groups = "adi2_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO17_P2",
@@ -145,8 +145,8 @@
                                        modsclsda {
                                                modsclsda_default_mode: modsclsda_default {
                                                        default_mux {
-                                                               ste,function = "modsclsda";
-                                                               ste,pins = "modsclsda_d_1";
+                                                               function = "modsclsda";
+                                                               groups = "modsclsda_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO40_J15",
@@ -159,8 +159,8 @@
                                        resethw {
                                                resethw_default_mode: resethw_default {
                                                        default_mux {
-                                                               ste,function = "resethw";
-                                                               ste,pins = "resethw_d_1";
+                                                               function = "resethw";
+                                                               groups = "resethw_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO52_D16";
@@ -172,8 +172,8 @@
                                        service {
                                                service_default_mode: service_default {
                                                        default_mux {
-                                                               ste,function = "service";
-                                                               ste,pins = "service_d_1";
+                                                               function = "service";
+                                                               groups = "service_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO53_D15";
@@ -188,8 +188,8 @@
                                        sysclkreq2 {
                                                sysclkreq2_default_mode: sysclkreq2_default {
                                                        default_mux {
-                                                               ste,function = "sysclkreq";
-                                                               ste,pins = "sysclkreq2_d_1";
+                                                               function = "sysclkreq";
+                                                               groups = "sysclkreq2_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO1_N4";
@@ -199,8 +199,8 @@
                                                };
                                                sysclkreq2_sleep_mode: sysclkreq2_sleep {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio1_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio1_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO1_N4";
@@ -212,8 +212,8 @@
                                        sysclkreq4 {
                                                sysclkreq4_default_mode: sysclkreq4_default {
                                                        default_mux {
-                                                               ste,function = "sysclkreq";
-                                                               ste,pins = "sysclkreq4_d_1";
+                                                               function = "sysclkreq";
+                                                               groups = "sysclkreq4_d_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO3_P5";
@@ -223,8 +223,8 @@
                                                };
                                                sysclkreq4_sleep_mode: sysclkreq4_sleep {
                                                        default_mux {
-                                                               ste,function = "gpio";
-                                                               ste,pins = "gpio3_a_1";
+                                                               function = "gpio";
+                                                               groups = "gpio3_a_1";
                                                        };
                                                        default_cfg {
                                                                ste,pins = "GPIO3_P5";

diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c
index 2289728..d0c0454 100644 (file)
--- a/drivers/pinctrl/nomadik/pinctrl-abx500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c
@@ -893,12 +893,13 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
        unsigned int nconfigs = 0;
        bool has_config = 0;
        struct property *prop;
-       const char *group, *gpio_name;
        struct device_node *np_config;
 
-       ret = of_property_read_string(np, "ste,function", &function);
+       ret = of_property_read_string(np, "function", &function);
        if (ret >= 0) {
-               ret = of_property_count_strings(np, "ste,pins");
+               const char *group;
+
+               ret = of_property_count_strings(np, "groups");
                if (ret < 0)
                        goto exit;
 
@@ -907,7 +908,7 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
                if (ret < 0)
                        goto exit;
 
-               of_property_for_each_string(np, "ste,pins", prop, group) {
+               of_property_for_each_string(np, "groups", prop, group) {
                        ret = abx500_dt_add_map_mux(map, reserved_maps,
                                        num_maps, group, function);
                        if (ret < 0)
@@ -927,6 +928,9 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
                has_config |= nconfigs;
        }
        if (has_config) {
+               const char *gpio_name;
+               const char *pin;
+
                ret = of_property_count_strings(np, "ste,pins");
                if (ret < 0)
                        goto exit;
@@ -937,8 +941,8 @@ static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
                if (ret < 0)
                        goto exit;
 
-               of_property_for_each_string(np, "ste,pins", prop, group) {
-                       gpio_name = abx500_find_pin_name(pctldev, group);
+               of_property_for_each_string(np, "ste,pins", prop, pin) {
+                       gpio_name = abx500_find_pin_name(pctldev, pin);
 
                        ret = abx500_dt_add_map_configs(map, reserved_maps,
                                        num_maps, gpio_name, configs, 1);