};
&rio {
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,mpc8568-rapidio", "fsl,rapidio-delta";
- interrupts = <48 2 0 0 /* error */
- 49 2 0 0 /* bell_outb */
- 50 2 0 0 /* bell_inb */
- 53 2 0 0 /* msg1_tx */
- 54 2 0 0 /* msg1_rx */
- 55 2 0 0 /* msg2_tx */
- 56 2 0 0 /* msg2_rx */>;
- sleep = <&pmc 0x00080000 /* controller */
- &pmc 0x00040000>; /* message unit */
+ fsl,srio-rmu-handle = <&rmu>;
+ sleep = <&pmc 0x00080000>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
};
&soc {
};
/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+ rmu@d3000 {
+ sleep = <&pmc 0x00040000>;
+ };
global-utilities@e0000 {
#address-cells = <1>;
};
&rio {
+ compatible = "fsl,srio";
+ interrupts = <48 2 0 0>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,mpc8569-rapidio", "fsl,rapidio-delta";
- interrupts = <48 2 0 0 /* error */
- 49 2 0 0 /* bell_outb */
- 50 2 0 0 /* bell_inb */
- 53 2 0 0 /* msg1_tx */
- 54 2 0 0 /* msg1_rx */
- 55 2 0 0 /* msg2_tx */
- 56 2 0 0 /* msg2_rx */>;
+ fsl,srio-rmu-handle = <&rmu>;
sleep = <&pmc 0x00080000>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
};
&soc {
};
/include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
+ rmu@d3000 {
+ sleep = <&pmc 0x00040000>;
+ };
global-utilities@e0000 {
#address-cells = <1>;
};
};
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
};
};
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
};
&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- interrupts = <
- 16 2 1 11 /* err_irq */
- 56 2 0 0 /* bell_outb_irq */
- 57 2 0 0 /* bell_inb_irq */
- 60 2 0 0 /* msg1_tx_irq */
- 61 2 0 0 /* msg1_rx_irq */
- 62 2 0 0 /* msg2_tx_irq */
- 63 2 0 0>; /* msg2_rx_irq */
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
};
&dcsr {
16 2 1 30>;
};
+/include/ "qoriq-rmu-0.dtsi"
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
-
- rio0 = &rapidio0;
};
cpus {
};
};
+&rio {
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ };
+
+ port2 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <2>;
+ };
+};
+
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
--- /dev/null
+/*
+ * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 0 0 /* msg1_tx_irq */
+ 54 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 0 0 /* msg2_tx_irq */
+ 56 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 0 0 /* bell_outb_irq */
+ 50 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2 0 0>;
+ };
+};
rio: rapidio@e00c00000 {
reg = <0x0 0xe00c0000 0x0 0x20000>;
- ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
};
leds {
rio: rapidio@e00c00000 {
reg = <0x0 0xe00c0000 0x0 0x20000>;
- ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ port1 {
+ ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+ };
+ port2 {
+ status = "disabled";
+ };
};
};
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
-/*
- * Only one of Rapid IO or PCI can be present due to HW limitations and
- * due to the fact that the 2 now share address space in the new memory
- * map. The most likely case is that we have PCI, so comment out the
- * rapidio node. Leave it here for reference.
- */
- /* rapidio0 = &rapidio0; */
};
cpus {
device_type = "open-pic";
};
+ rmu: rmu@d3000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x500>;
+ ranges = <0x0 0xd3000 0x500>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 53 2 /* msg1_tx_irq */
+ 54 2>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 55 2 /* msg2_tx_irq */
+ 56 2>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 49 2 /* bell_outb_irq */
+ 50 2>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <48 2>;
+ };
+ };
+
global-utilities@e0000 {
compatible = "fsl,mpc8641-guts";
reg = <0xe0000 0x1000>;
};
};
/*
- rapidio0: rapidio@ffec0000 {
+ * Only one of Rapid IO or PCI can be present due to HW limitations and
+ * due to the fact that the 2 now share address space in the new memory
+ * map. The most likely case is that we have PCI, so comment out the
+ * rapidio node. Leave it here for reference.
+
+ rapidio@ffec0000 {
+ reg = <0xffec0000 0x11000>;
+ compatible = "fsl,srio";
+ interrupt-parent = <&mpic>;
+ interrupts = <48 2>;
#address-cells = <2>;
#size-cells = <2>;
- compatible = "fsl,rapidio-delta";
- reg = <0xffec0000 0x20000>;
- ranges = <0 0 0x80000000 0 0x20000000>;
- interrupt-parent = <&mpic>;
- // err_irq bell_outb_irq bell_inb_irq
- // msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq
- interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cell-index = <1>;
+ ranges = <0 0 0x80000000 0 0x20000000>;
+ };
};
*/
};
};
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
};
};
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
};
};
- rio: rapidio0: rapidio@ffe0c0000 {
- reg = <0xf 0xfe0c0000 0 0x20000>;
- ranges = <0 0 0xc 0x20000000 0 0x01000000>;
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
};
lbc: localbus@ffe124000 {
};
};
+ rio: rapidio@ffe0c0000 {
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+
+ port1 {
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+ port2 {
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };
+
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
OSDN Git Service
