OSDN Git Service

bfd/
authordrow <drow>
Mon, 11 Dec 2006 15:09:40 +0000 (15:09 +0000)
committerdrow <drow>
Mon, 11 Dec 2006 15:09:40 +0000 (15:09 +0000)
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (bfd.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
binutils/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
gas/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (as.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in, doc/Makefile.in: Regenerated.
gprof/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (gprof.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in: Regenerated.
ld/
* configure.in: Define GENINSRC_NEVER.
* doc/Makefile.am (ld.info): Remove srcdir prefix.
(MAINTAINERCLEANFILES): Add info file.
(DISTCLEANFILES): Pretend to add info file.
* po/Make-in (.po.gmo): Put gmo files in objdir.
* configure, Makefile.in: Regenerated.
opcodes/
* po/Make-in (.po.gmo): Put gmo files in objdir.

35 files changed:
bfd/ChangeLog
bfd/Makefile.in
bfd/configure
bfd/configure.in
bfd/doc/Makefile.am
bfd/doc/Makefile.in
bfd/po/Make-in
binutils/ChangeLog
binutils/Makefile.in
binutils/configure
binutils/configure.in
binutils/doc/Makefile.am
binutils/doc/Makefile.in
binutils/po/Make-in
gas/ChangeLog
gas/Makefile.in
gas/configure
gas/configure.in
gas/doc/Makefile.am
gas/doc/Makefile.in
gas/po/Make-in
gprof/ChangeLog
gprof/Makefile.am
gprof/Makefile.in
gprof/configure
gprof/configure.in
gprof/po/Make-in
ld/ChangeLog
ld/Makefile.am
ld/Makefile.in
ld/configure
ld/configure.in
ld/po/Make-in
opcodes/ChangeLog
opcodes/po/Make-in

index 274ca81..6ffc552 100644 (file)
@@ -1,3 +1,12 @@
+2006-12-11  Daniel Jacobowitz  <dan@codesourcery.com>
+
+       * configure.in: Define GENINSRC_NEVER.
+       * doc/Makefile.am (bfd.info): Remove srcdir prefix.
+       (MAINTAINERCLEANFILES): Add info file.
+       (DISTCLEANFILES): Pretend to add info file.
+       * po/Make-in (.po.gmo): Put gmo files in objdir.
+       * configure, Makefile.in, doc/Makefile.in: Regenerated.
+
 2006-12-11  Eric Botcazou  <ebotcazou@adacore.com>
 
        * elflink.c (bfd_elf_gc_sections): Also search for corresponding
index 5bde689..431bfff 100644 (file)
@@ -140,7 +140,10 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 HDEFINES = @HDEFINES@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
@@ -186,10 +189,7 @@ WARN_CFLAGS = @WARN_CFLAGS@
 WIN32LDFLAGS = @WIN32LDFLAGS@
 WIN32LIBADD = @WIN32LIBADD@
 XGETTEXT = @XGETTEXT@
-ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 all_backends = @all_backends@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
@@ -215,6 +215,7 @@ build_vendor = @build_vendor@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
@@ -228,12 +229,15 @@ infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
index bc138ff..07c20c1 100755 (executable)
@@ -309,7 +309,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AR ac_ct_AR RANLIB ac_ct_RANLIB LN_S LIBTOOL WARN_CFLAGS NO_WERROR MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT INSTALL_LIBBFD_TRUE INSTALL_LIBBFD_FALSE host_noncanonical target_noncanonical bfdlibdir bfdincludedir USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE HDEFINES CPP EGREP BFD_HOST_64BIT_LONG BFD_HOST_LONG_LONG BFD_HOST_64_BIT_DEFINED BFD_HOST_64_BIT BFD_HOST_U_64_BIT CC_FOR_BUILD EXEEXT_FOR_BUILD COREFILE COREFLAG WIN32LDFLAGS WIN32LIBADD TDEFINES wordsize bfd_libs all_backends bfd_backends bfd_machines bfd_default_target_size bfd_file_ptr bfd_ufile_ptr tdefaults datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AR ac_ct_AR RANLIB ac_ct_RANLIB LN_S LIBTOOL WARN_CFLAGS NO_WERROR MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE INSTALL_LIBBFD_TRUE INSTALL_LIBBFD_FALSE host_noncanonical target_noncanonical bfdlibdir bfdincludedir USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE HDEFINES CPP EGREP BFD_HOST_64BIT_LONG BFD_HOST_LONG_LONG BFD_HOST_64_BIT_DEFINED BFD_HOST_64_BIT BFD_HOST_U_64_BIT CC_FOR_BUILD EXEEXT_FOR_BUILD COREFILE COREFLAG WIN32LDFLAGS WIN32LIBADD TDEFINES wordsize bfd_libs all_backends bfd_backends bfd_machines bfd_default_target_size bfd_file_ptr bfd_ufile_ptr tdefaults datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -4472,6 +4472,16 @@ fi
   MAINT=$MAINTAINER_MODE_TRUE
 
 
+
+
+if false; then
+  GENINSRC_NEVER_TRUE=
+  GENINSRC_NEVER_FALSE='#'
+else
+  GENINSRC_NEVER_TRUE='#'
+  GENINSRC_NEVER_FALSE=
+fi
+
  case ${build_alias} in
   "") build_noncanonical=${build} ;;
   *) build_noncanonical=${build_alias} ;;
@@ -12384,6 +12394,13 @@ echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 if test -z "${INSTALL_LIBBFD_TRUE}" && test -z "${INSTALL_LIBBFD_FALSE}"; then
   { { echo "$as_me:$LINENO: error: conditional \"INSTALL_LIBBFD\" was never defined.
 Usually this means the macro was only invoked conditionally." >&5
@@ -12997,6 +13014,8 @@ s,@NO_WERROR@,$NO_WERROR,;t t
 s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
 s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
 s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
 s,@INSTALL_LIBBFD_TRUE@,$INSTALL_LIBBFD_TRUE,;t t
 s,@INSTALL_LIBBFD_FALSE@,$INSTALL_LIBBFD_FALSE,;t t
 s,@host_noncanonical@,$host_noncanonical,;t t
index fa0d50f..073377a 100644 (file)
@@ -72,6 +72,7 @@ if test -z "$target" ; then
 fi
 
 AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
 AM_INSTALL_LIBBFD
 AC_EXEEXT
 
index 6d221fa..1ba74b7 100644 (file)
@@ -68,7 +68,7 @@ chew.o: chew.c
 
 protos: libbfd.h libcoff.h bfd.h
 
-$(srcdir)/bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
+bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
 
 # We can't replace these rules with an implicit rule, because
 # makes without VPATH support couldn't find the .h files in `..'.
@@ -309,6 +309,11 @@ install-html-am: $(HTMLS)
          fi; \
        done
 
+MAINTAINERCLEANFILES += bfd.info
 
-
-
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES += bfd.info
+endif
index 54becb7..9d07b69 100644 (file)
@@ -36,6 +36,11 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@am__append_1 = bfd.info
 subdir = doc
 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -54,7 +59,7 @@ CONFIG_CLEAN_FILES =
 depcomp =
 am__depfiles_maybe =
 SOURCES =
-INFO_DEPS = $(srcdir)/bfd.info
+INFO_DEPS = bfd.info
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
 DVIS = bfd.dvi
@@ -106,7 +111,10 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 HDEFINES = @HDEFINES@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
@@ -152,10 +160,7 @@ WARN_CFLAGS = @WARN_CFLAGS@
 WIN32LDFLAGS = @WIN32LDFLAGS@
 WIN32LIBADD = @WIN32LIBADD@
 XGETTEXT = @XGETTEXT@
-ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 all_backends = @all_backends@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
@@ -181,6 +186,7 @@ build_vendor = @build_vendor@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
@@ -194,12 +200,15 @@ infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
@@ -311,13 +320,14 @@ BFD_H_DEP = \
 noinst_TEXINFOS = bfdint.texi
 MOSTLYCLEANFILES = $(MKDOC) *.o
 CLEANFILES = *.p *.ip
-DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log
-MAINTAINERCLEANFILES = $(DOCFILES)
+DISTCLEANFILES = bfd.?? bfd.??? bfd.h libbfd.h libcoff.h texput.log \
+       $(am__append_1)
+MAINTAINERCLEANFILES = $(DOCFILES) bfd.info
 html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 all: all-am
 
 .SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texinfo
+.SUFFIXES: .dvi .ps
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
@@ -357,42 +367,38 @@ clean-libtool:
 distclean-libtool:
        -rm -f libtool
 
-.texinfo.info:
+bfd.info: bfd.texinfo 
        restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-       am__cwd=`pwd` && cd $(srcdir) && \
        rm -rf $$backupdir && mkdir $$backupdir && \
        if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
          for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
            if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
          done; \
        else :; fi && \
-       cd "$$am__cwd"; \
        if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $@ $<; \
+        -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
        then \
          rc=0; \
-         cd $(srcdir); \
        else \
          rc=$$?; \
-         cd $(srcdir) && \
          $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
        fi; \
        rm -rf $$backupdir; exit $$rc
 
-.texinfo.dvi:
+bfd.dvi: bfd.texinfo  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2DVI) $<
+       $(TEXI2DVI) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo
 
-.texinfo.pdf:
+bfd.pdf: bfd.texinfo  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2PDF) $<
+       $(TEXI2PDF) -o $@ `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo
 
-.texinfo.html:
+bfd.html: bfd.texinfo  
        rm -rf $(@:.html=.htp)
        if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $(@:.html=.htp) $<; \
+        -o $(@:.html=.htp) `test -f 'bfd.texinfo' || echo '$(srcdir)/'`bfd.texinfo; \
        then \
          rm -rf $@; \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
@@ -402,10 +408,6 @@ distclean-libtool:
            rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
          exit 1; \
        fi
-$(srcdir)/bfd.info: bfd.texinfo 
-bfd.dvi: bfd.texinfo 
-bfd.pdf: bfd.texinfo 
-bfd.html: bfd.texinfo 
 .dvi.ps:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        $(DVIPS) -o $@ $<
@@ -600,7 +602,7 @@ chew.o: chew.c
 
 protos: libbfd.h libcoff.h bfd.h
 
-$(srcdir)/bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
+bfd.info bfd.dvi bfd.html: $(DOCFILES) bfdsumm.texi bfd.texinfo
 
 # We can't replace these rules with an implicit rule, because
 # makes without VPATH support couldn't find the .h files in `..'.
index 1696ec9..1a61992 100644 (file)
@@ -79,7 +79,7 @@ INSTOBJEXT = @INSTOBJEXT@
        $(MSGFMT) -o $@ $<
 
 .po.gmo:
-       file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+       file=`echo $* | sed 's,.*/,,'`.gmo \
          && rm -f $$file && $(GMSGFMT) -o $$file $<
 
 .po.cat:
index a05137a..1374125 100644 (file)
@@ -1,3 +1,11 @@
+2006-12-11  Daniel Jacobowitz  <dan@codesourcery.com>
+
+       * configure.in: Define GENINSRC_NEVER.
+       * doc/Makefile.am (MAINTAINERCLEANFILES): Add info file.
+       (DISTCLEANFILES): Pretend to add info file.
+       * po/Make-in (.po.gmo): Put gmo files in objdir.
+       * configure, Makefile.in, doc/Makefile.in: Regenerated.
+
 2006-12-07  Kazu Hirata  <kazu@codesourcery.com>
 
        * readelf.c: Update uses of EF_M68K_*.
index dce0e84..cc70931 100644 (file)
@@ -234,7 +234,10 @@ EMULATION_VECTOR = @EMULATION_VECTOR@
 EXEEXT = @EXEEXT@
 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 HDEFINES = @HDEFINES@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
@@ -281,9 +284,8 @@ VERSION = @VERSION@
 WARN_CFLAGS = @WARN_CFLAGS@
 XGETTEXT = @XGETTEXT@
 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
+YFLAGS = -d
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -300,6 +302,7 @@ build_vendor = @build_vendor@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
@@ -312,12 +315,15 @@ infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
@@ -329,7 +335,6 @@ target_vendor = @target_vendor@
 AUTOMAKE_OPTIONS = cygnus dejagnu
 SUBDIRS = doc po
 tooldir = $(exec_prefix)/$(target_alias)
-YFLAGS = -d
 AM_CFLAGS = $(WARN_CFLAGS)
 
 # these two are almost the same program
index 4124830..eaddc74 100755 (executable)
@@ -309,7 +309,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS NO_WERROR YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT HDEFINES AR CC_FOR_BUILD EXEEXT_FOR_BUILD DEMANGLER_NAME CPP EGREP ALLOCA NLMCONV_DEFS BUILD_NLMCONV BUILD_SRCONV BUILD_DLLTOOL DLLTOOL_DEFS BUILD_WINDRES BUILD_DLLWRAP BUILD_MISC OBJDUMP_DEFS EMULATION EMULATION_VECTOR datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS NO_WERROR YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE HDEFINES AR CC_FOR_BUILD EXEEXT_FOR_BUILD DEMANGLER_NAME CPP EGREP ALLOCA NLMCONV_DEFS BUILD_NLMCONV BUILD_SRCONV BUILD_DLLTOOL DLLTOOL_DEFS BUILD_WINDRES BUILD_DLLWRAP BUILD_MISC OBJDUMP_DEFS EMULATION EMULATION_VECTOR datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -5704,6 +5704,16 @@ fi
 
 
 
+
+if false; then
+  GENINSRC_NEVER_TRUE=
+  GENINSRC_NEVER_FALSE='#'
+else
+  GENINSRC_NEVER_TRUE='#'
+  GENINSRC_NEVER_FALSE=
+fi
+
+
 if test -n "$EXEEXT"; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -8863,6 +8873,13 @@ echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -9483,6 +9500,8 @@ s,@MSGMERGE@,$MSGMERGE,;t t
 s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
 s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
 s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
 s,@HDEFINES@,$HDEFINES,;t t
 s,@AR@,$AR,;t t
 s,@CC_FOR_BUILD@,$CC_FOR_BUILD,;t t
index f2f3db8..bf95051 100644 (file)
@@ -51,6 +51,7 @@ ZW_GNU_GETTEXT_SISTER_DIR
 AM_PO_SUBDIRS
 
 AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
 AC_EXEEXT
 if test -n "$EXEEXT"; then
   AC_DEFINE(HAVE_EXECUTABLE_SUFFIX, 1,
index ca441c9..154d0c3 100644 (file)
@@ -180,6 +180,15 @@ install-html-am: $(HTMLS)
          fi; \
        done
 
+MAINTAINERCLEANFILES += binutils.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = binutils.info
+endif
+
 # Maintenance
 
 # We need it for the taz target in ../../Makefile.in.
index e76b957..1e171b0 100644 (file)
@@ -56,7 +56,7 @@ CONFIG_CLEAN_FILES =
 depcomp =
 am__depfiles_maybe =
 SOURCES =
-INFO_DEPS = $(srcdir)/binutils.info
+INFO_DEPS = binutils.info
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
 DVIS = binutils.dvi
@@ -111,7 +111,10 @@ EMULATION_VECTOR = @EMULATION_VECTOR@
 EXEEXT = @EXEEXT@
 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 HDEFINES = @HDEFINES@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
@@ -158,9 +161,8 @@ VERSION = @VERSION@
 WARN_CFLAGS = @WARN_CFLAGS@
 XGETTEXT = @XGETTEXT@
 YACC = @YACC@
+YFLAGS = @YFLAGS@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -177,6 +179,7 @@ build_vendor = @build_vendor@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
@@ -189,12 +192,15 @@ infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
@@ -237,13 +243,18 @@ binutils_TEXINFOS = config.texi
 binutils_TEXI = $(srcdir)/binutils.texi
 AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
 TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
-MAINTAINERCLEANFILES = config.texi
+MAINTAINERCLEANFILES = config.texi binutils.info
 MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
 html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@DISTCLEANFILES = binutils.info
 all: all-am
 
 .SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texi
+.SUFFIXES: .dvi .ps
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
@@ -283,42 +294,38 @@ clean-libtool:
 distclean-libtool:
        -rm -f libtool
 
-.texi.info:
+binutils.info: binutils.texi $(binutils_TEXINFOS)
        restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-       am__cwd=`pwd` && cd $(srcdir) && \
        rm -rf $$backupdir && mkdir $$backupdir && \
        if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
          for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
            if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
          done; \
        else :; fi && \
-       cd "$$am__cwd"; \
        if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $@ $<; \
+        -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
        then \
          rc=0; \
-         cd $(srcdir); \
        else \
          rc=$$?; \
-         cd $(srcdir) && \
          $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
        fi; \
        rm -rf $$backupdir; exit $$rc
 
-.texi.dvi:
+binutils.dvi: binutils.texi $(binutils_TEXINFOS) 
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2DVI) $<
+       $(TEXI2DVI) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
 
-.texi.pdf:
+binutils.pdf: binutils.texi $(binutils_TEXINFOS) 
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2PDF) $<
+       $(TEXI2PDF) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
 
-.texi.html:
+binutils.html: binutils.texi $(binutils_TEXINFOS) 
        rm -rf $(@:.html=.htp)
        if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $(@:.html=.htp) $<; \
+        -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
        then \
          rm -rf $@; \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
@@ -328,10 +335,6 @@ distclean-libtool:
            rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
          exit 1; \
        fi
-$(srcdir)/binutils.info: binutils.texi $(binutils_TEXINFOS)
-binutils.dvi: binutils.texi $(binutils_TEXINFOS)
-binutils.pdf: binutils.texi $(binutils_TEXINFOS)
-binutils.html: binutils.texi $(binutils_TEXINFOS)
 .dvi.ps:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        $(DVIPS) -o $@ $<
@@ -467,6 +470,7 @@ clean-generic:
 
 distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
index 88ce78f..86ff314 100644 (file)
@@ -73,7 +73,7 @@ INSTOBJEXT = @INSTOBJEXT@
        $(MSGFMT) -o $@ $<
 
 .po.gmo:
-       file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+       file=`echo $* | sed 's,.*/,,'`.gmo \
          && rm -f $$file && $(GMSGFMT) -o $$file $<
 
 .po.cat:
index 71b9c9b..6bf4e8f 100644 (file)
@@ -1,3 +1,12 @@
+2006-12-11  Daniel Jacobowitz  <dan@codesourcery.com>
+
+       * configure.in: Define GENINSRC_NEVER.
+       * doc/Makefile.am (as.info): Remove srcdir prefix.
+       (MAINTAINERCLEANFILES): Add info file.
+       (DISTCLEANFILES): Pretend to add info file.
+       * po/Make-in (.po.gmo): Put gmo files in objdir.
+       * configure, Makefile.in, doc/Makefile.in: Regenerated.
+
 2006-12-09  H.J. Lu  <hongjiu.lu@intel.com>
 
        * config/tc-i386.h (template): Use MAX_OPERANDS instead of 4
index 6cf8e0b..5a677e8 100644 (file)
@@ -142,7 +142,10 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 GDBINIT = @GDBINIT@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -188,9 +191,8 @@ VERSION = @VERSION@
 WARN_CFLAGS = @WARN_CFLAGS@
 XGETTEXT = @XGETTEXT@
 YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo @YACC@ ; fi`
+YFLAGS = @YFLAGS@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -209,6 +211,7 @@ cgen_cpu_prefix = @cgen_cpu_prefix@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 extra_objects = @extra_objects@
 host = @host@
@@ -223,13 +226,16 @@ install_sh = @install_sh@
 install_tooldir = @install_tooldir@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 obj_format = @obj_format@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
index 4a1a683..6f45a0e 100755 (executable)
@@ -309,7 +309,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS NO_WERROR GDBINIT cgen_cpu_prefix extra_objects target_cpu_type obj_format te_file install_tooldir atof OPCODES_LIB YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CPP EGREP ALLOCA LIBM datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL WARN_CFLAGS NO_WERROR GDBINIT cgen_cpu_prefix extra_objects target_cpu_type obj_format te_file install_tooldir atof OPCODES_LIB YACC LEX LEXLIB LEX_OUTPUT_ROOT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE CPP EGREP ALLOCA LIBM datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -6629,6 +6629,16 @@ fi
 
 
 
+if false; then
+  GENINSRC_NEVER_TRUE=
+  GENINSRC_NEVER_FALSE='#'
+else
+  GENINSRC_NEVER_TRUE='#'
+  GENINSRC_NEVER_FALSE=
+fi
+
+
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -8984,6 +8994,13 @@ echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -9620,6 +9637,8 @@ s,@MSGMERGE@,$MSGMERGE,;t t
 s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
 s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
 s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
 s,@CPP@,$CPP,;t t
 s,@EGREP@,$EGREP,;t t
 s,@ALLOCA@,$ALLOCA,;t t
index a0592d1..751b21a 100644 (file)
@@ -586,6 +586,7 @@ ZW_GNU_GETTEXT_SISTER_DIR
 AM_PO_SUBDIRS
 
 AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
 AC_EXEEXT
 
 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
index 83f6a39..bfe4196 100644 (file)
@@ -67,7 +67,7 @@ gasver.texi: $(srcdir)/../../bfd/configure
        eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
          echo "@set VERSION $$VERSION" > $@
 
-$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
 
 # We want install to imply install-info as per GNU standards, despite the
 # cygnus option.
@@ -121,3 +121,12 @@ as.1: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
                mv -f $@.T$$$$ $@) || \
                (rm -f $@.T$$$$ && exit 1)
        rm -f as.pod
+
+MAINTAINERCLEANFILES += as.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = as.info
+endif
index b692eaf..e70a955 100644 (file)
@@ -53,7 +53,7 @@ CONFIG_CLEAN_FILES =
 depcomp =
 am__depfiles_maybe =
 SOURCES =
-INFO_DEPS = $(srcdir)/as.info
+INFO_DEPS = as.info
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
 DVIS = as.dvi
@@ -96,7 +96,10 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 GDBINIT = @GDBINIT@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -142,9 +145,8 @@ VERSION = @VERSION@
 WARN_CFLAGS = @WARN_CFLAGS@
 XGETTEXT = @XGETTEXT@
 YACC = @YACC@
+YFLAGS = @YFLAGS@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -163,6 +165,7 @@ cgen_cpu_prefix = @cgen_cpu_prefix@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 extra_objects = @extra_objects@
 host = @host@
@@ -177,13 +180,16 @@ install_sh = @install_sh@
 install_tooldir = @install_tooldir@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 obj_format = @obj_format@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
@@ -250,14 +256,19 @@ html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 
 # This one isn't ready for prime time yet.  Not even a little bit.
 noinst_TEXINFOS = internals.texi
-MAINTAINERCLEANFILES = asconfig.texi gasver.texi
+MAINTAINERCLEANFILES = asconfig.texi gasver.texi as.info
 BASEDIR = $(srcdir)/../..
 BFDDIR = $(BASEDIR)/bfd
 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@DISTCLEANFILES = as.info
 all: all-am
 
 .SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texinfo
+.SUFFIXES: .dvi .ps
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
        @for dep in $?; do \
          case '$(am__configure_deps)' in \
@@ -297,42 +308,38 @@ clean-libtool:
 distclean-libtool:
        -rm -f libtool
 
-.texinfo.info:
+as.info: as.texinfo 
        restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-       am__cwd=`pwd` && cd $(srcdir) && \
        rm -rf $$backupdir && mkdir $$backupdir && \
        if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
          for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
            if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
          done; \
        else :; fi && \
-       cd "$$am__cwd"; \
        if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $@ $<; \
+        -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
        then \
          rc=0; \
-         cd $(srcdir); \
        else \
          rc=$$?; \
-         cd $(srcdir) && \
          $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
        fi; \
        rm -rf $$backupdir; exit $$rc
 
-.texinfo.dvi:
+as.dvi: as.texinfo  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2DVI) $<
+       $(TEXI2DVI) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
 
-.texinfo.pdf:
+as.pdf: as.texinfo  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2PDF) $<
+       $(TEXI2PDF) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
 
-.texinfo.html:
+as.html: as.texinfo  
        rm -rf $(@:.html=.htp)
        if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $(@:.html=.htp) $<; \
+        -o $(@:.html=.htp) `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
        then \
          rm -rf $@; \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
@@ -342,10 +349,6 @@ distclean-libtool:
            rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
          exit 1; \
        fi
-$(srcdir)/as.info: as.texinfo 
-as.dvi: as.texinfo 
-as.pdf: as.texinfo 
-as.html: as.texinfo 
 .dvi.ps:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        $(DVIPS) -o $@ $<
@@ -477,6 +480,7 @@ clean-generic:
 
 distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
@@ -587,7 +591,7 @@ gasver.texi: $(srcdir)/../../bfd/configure
        eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
          echo "@set VERSION $$VERSION" > $@
 
-$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
 
 # We want install to imply install-info as per GNU standards, despite the
 # cygnus option.
index 88ce78f..86ff314 100644 (file)
@@ -73,7 +73,7 @@ INSTOBJEXT = @INSTOBJEXT@
        $(MSGFMT) -o $@ $<
 
 .po.gmo:
-       file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+       file=`echo $* | sed 's,.*/,,'`.gmo \
          && rm -f $$file && $(GMSGFMT) -o $$file $<
 
 .po.cat:
index 7a09c3e..cc2c54a 100644 (file)
@@ -1,3 +1,12 @@
+2006-12-11  Daniel Jacobowitz  <dan@codesourcery.com>
+
+       * configure.in: Define GENINSRC_NEVER.
+       * doc/Makefile.am (gprof.info): Remove srcdir prefix.
+       (MAINTAINERCLEANFILES): Add info file.
+       (DISTCLEANFILES): Pretend to add info file.
+       * po/Make-in (.po.gmo): Put gmo files in objdir.
+       * configure, Makefile.in: Regenerated.
+
 2006-11-27  Nick Clifton  <nickc@redhat.com>
 
        * po/ms.po: Updated Malay translation.
index 4e2c88c..ea3fa4a 100644 (file)
@@ -61,7 +61,7 @@ POD2MAN = pod2man --center="GNU" --release="binutils-$(VERSION)" --section=1
 info_TEXINFOS = gprof.texi
 man_MANS = gprof.1
 
-$(srcdir)/gprof.info: gprof.texi config.texi
+gprof.info: gprof.texi config.texi
 
 config.texi:
        echo "@set top_srcdir $(top_srcdir)" >> ./config.texi
@@ -177,6 +177,15 @@ dep-am: DEP
 
 CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
 
+MAINTAINERCLEANFILES = gprof.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = gprof.info
+endif
+
 # DO NOT DELETE THIS LINE -- mkdep uses it.
 # DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
 basic_blocks.o: basic_blocks.c $(INCDIR)/libiberty.h \
index 677a062..d2d7971 100644 (file)
@@ -87,7 +87,7 @@ CCLD = $(CC)
 LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
        $(AM_LDFLAGS) $(LDFLAGS) -o $@
 SOURCES = $(gprof_SOURCES)
-INFO_DEPS = $(srcdir)/gprof.info
+INFO_DEPS = gprof.info
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
 DVIS = gprof.dvi
@@ -142,7 +142,10 @@ ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -183,8 +186,6 @@ VERSION = @VERSION@
 WARN_CFLAGS = @WARN_CFLAGS@
 XGETTEXT = @XGETTEXT@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -201,6 +202,7 @@ build_vendor = @build_vendor@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
@@ -213,12 +215,15 @@ infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
@@ -259,11 +264,17 @@ info_TEXINFOS = gprof.texi
 man_MANS = gprof.1
 html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
+MAINTAINERCLEANFILES = gprof.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@DISTCLEANFILES = gprof.info
 all: $(BUILT_SOURCES) gconfig.h
        $(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-.SUFFIXES: .m .c .dvi .html .info .lo .o .obj .pdf .ps .texi
+.SUFFIXES: .m .c .dvi .lo .o .obj .ps
 am--refresh:
        @:
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
@@ -372,42 +383,20 @@ clean-libtool:
 distclean-libtool:
        -rm -f libtool
 
-.texi.info:
-       restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-       am__cwd=`pwd` && cd $(srcdir) && \
-       rm -rf $$backupdir && mkdir $$backupdir && \
-       if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
-         for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
-           if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
-         done; \
-       else :; fi && \
-       cd "$$am__cwd"; \
-       if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $@ $<; \
-       then \
-         rc=0; \
-         cd $(srcdir); \
-       else \
-         rc=$$?; \
-         cd $(srcdir) && \
-         $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
-       fi; \
-       rm -rf $$backupdir; exit $$rc
-
-.texi.dvi:
+gprof.dvi: gprof.texi  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2DVI) $<
+       $(TEXI2DVI) -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi
 
-.texi.pdf:
+gprof.pdf: gprof.texi  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2PDF) $<
+       $(TEXI2PDF) -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi
 
-.texi.html:
+gprof.html: gprof.texi  
        rm -rf $(@:.html=.htp)
        if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $(@:.html=.htp) $<; \
+        -o $(@:.html=.htp) `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi; \
        then \
          rm -rf $@; \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
@@ -417,9 +406,6 @@ distclean-libtool:
            rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
          exit 1; \
        fi
-gprof.dvi: gprof.texi 
-gprof.pdf: gprof.texi 
-gprof.html: gprof.texi 
 .dvi.ps:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        $(DVIPS) -o $@ $<
@@ -683,11 +669,13 @@ clean-generic:
 
 distclean-generic:
        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
        -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+       -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 clean: clean-recursive
 
 clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
@@ -808,7 +796,7 @@ po/POTFILES.in: @MAINT@ Makefile
        for f in $(POTFILES); do echo $$f; done | LC_COLLATE= sort > tmp \
          && mv tmp $(srcdir)/po/POTFILES.in
 
-$(srcdir)/gprof.info: gprof.texi config.texi
+gprof.info: gprof.texi config.texi
 
 config.texi:
        echo "@set top_srcdir $(top_srcdir)" >> ./config.texi
index bf42270..8eda958 100755 (executable)
@@ -309,7 +309,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT CPP EGREP WARN_CFLAGS NO_WERROR datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE CPP EGREP WARN_CFLAGS NO_WERROR datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
 ac_subst_files=''
 
 # Initialize some variables set by options.
@@ -5474,6 +5474,16 @@ fi
 
 
 
+if false; then
+  GENINSRC_NEVER_TRUE=
+  GENINSRC_NEVER_FALSE='#'
+else
+  GENINSRC_NEVER_TRUE='#'
+  GENINSRC_NEVER_FALSE=
+fi
+
+
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -6347,6 +6357,13 @@ echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -6960,6 +6977,8 @@ s,@MSGMERGE@,$MSGMERGE,;t t
 s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
 s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
 s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
 s,@CPP@,$CPP,;t t
 s,@EGREP@,$EGREP,;t t
 s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t
index 4ca42b4..95c2b86 100644 (file)
@@ -29,6 +29,7 @@ ZW_GNU_GETTEXT_SISTER_DIR
 AM_PO_SUBDIRS
 
 AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
 AC_EXEEXT
 
 AC_CHECK_HEADERS(sys/gmon_out.h)
index f4daa35..b2988cb 100644 (file)
@@ -73,7 +73,7 @@ INSTOBJEXT = @INSTOBJEXT@
        $(MSGFMT) -o $@ $<
 
 .po.gmo:
-       file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+       file=`echo $* | sed 's,.*/,,'`.gmo \
          && rm -f $$file && $(GMSGFMT) -o $$file $<
 
 .po.cat:
index df00020..0cdbb8b 100644 (file)
@@ -1,3 +1,12 @@
+2006-12-11  Daniel Jacobowitz  <dan@codesourcery.com>
+
+       * configure.in: Define GENINSRC_NEVER.
+       * doc/Makefile.am (ld.info): Remove srcdir prefix.
+       (MAINTAINERCLEANFILES): Add info file.
+       (DISTCLEANFILES): Pretend to add info file.
+       * po/Make-in (.po.gmo): Put gmo files in objdir.
+       * configure, Makefile.in: Regenerated.
+
 2006-12-04  Jan Beulich  <jbeulich@novell.com>
 
        * emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Create
index 9f9cef5..9b8d198 100644 (file)
@@ -1760,7 +1760,7 @@ ldver.texi: $(srcdir)/../bfd/configure
        eval `grep '^ *VERSION=' $(srcdir)/../bfd/configure`; \
          echo "@set VERSION $$VERSION" > $@
 
-$(srcdir)/ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
+ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
 
 # Build the man page from the texinfo file
 # The sed command removes the no-adjust Nroff command so that
@@ -1877,6 +1877,15 @@ DISTCLEANFILES = tdirs site.exp site.bak stringify.sed
 distclean-local:
        rm -rf ldscripts
 
+MAINTAINERCLEANFILES += ld.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES += ld.info
+endif
+
 # Targets to rebuild dependencies in this Makefile.
 # Have to get rid of DEP1 here so that "$?" later includes all of $(CFILES).
 DEP: dep.sed $(CFILES) $(HFILES) $(GENERATED_CFILES) $(GENERATED_HFILES) config.h
index 1f51580..5d9659a 100644 (file)
@@ -38,6 +38,11 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 noinst_PROGRAMS = ld-new$(EXEEXT)
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@am__append_1 = ld.info
 DIST_COMMON = $(srcdir)/../config.guess $(srcdir)/../config.sub NEWS \
        README ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
        $(top_srcdir)/configure $(am__configure_deps) \
@@ -90,7 +95,7 @@ LTYACCCOMPILE = $(LIBTOOL) --mode=compile $(YACC) $(YFLAGS) \
        $(AM_YFLAGS)
 YLWRAP = $(top_srcdir)/../ylwrap
 SOURCES = $(ld_new_SOURCES) $(EXTRA_ld_new_SOURCES)
-INFO_DEPS = $(srcdir)/ld.info
+INFO_DEPS = ld.info
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
 DVIS = ld.dvi
@@ -146,7 +151,10 @@ EMULATION_OFILES = @EMULATION_OFILES@
 EMUL_EXTRA_OFILES = @EMUL_EXTRA_OFILES@
 EXEEXT = @EXEEXT@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 HDEFINES = @HDEFINES@
 
 #stuff for self hosting (can be overridden in config file).
@@ -211,9 +219,8 @@ VERSION = @VERSION@
 WARN_CFLAGS = @WARN_CFLAGS@
 XGETTEXT = @XGETTEXT@
 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
+YFLAGS = -d
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -230,6 +237,7 @@ build_vendor = @build_vendor@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
@@ -242,12 +250,15 @@ infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
@@ -260,7 +271,6 @@ use_sysroot = @use_sysroot@
 AUTOMAKE_OPTIONS = cygnus dejagnu
 SUBDIRS = po
 tooldir = $(exec_prefix)/$(target_alias)
-YFLAGS = -d
 AM_CFLAGS = $(WARN_CFLAGS)
 
 # We put the scripts in the directory $(scriptdir)/ldscripts.
@@ -676,7 +686,7 @@ ld_new_SOURCES = ldgram.y ldlex.l lexsup.c ldlang.c mri.c ldctor.c ldmain.c \
 
 ld_new_DEPENDENCIES = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL_DEP)
 ld_new_LDADD = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
-MAINTAINERCLEANFILES = ldver.texi configdoc.texi
+MAINTAINERCLEANFILES = ldver.texi configdoc.texi ld.info
 
 # We want to reconfigure if configure.host or configure.tgt changes.  We
 # extract version from bfd/configure.in, so we must depend on that also.
@@ -692,12 +702,12 @@ html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 # Stuff that should be included in a distribution.  The diststuff
 # target is run by the taz target in ../Makefile.in.
 EXTRA_DIST = ldgram.c ldgram.h ldlex.c emultempl/spu_ovl.o $(man_MANS)
-DISTCLEANFILES = tdirs site.exp site.bak stringify.sed
+DISTCLEANFILES = tdirs site.exp site.bak stringify.sed $(am__append_1)
 all: config.h
        $(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-.SUFFIXES: .c .dvi .html .info .l .lo .o .obj .pdf .ps .texinfo .y
+.SUFFIXES: .c .dvi .l .lo .o .obj .ps .y
 am--refresh:
        @:
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
@@ -803,42 +813,38 @@ clean-libtool:
 distclean-libtool:
        -rm -f libtool
 
-.texinfo.info:
+ld.info: ld.texinfo 
        restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-       am__cwd=`pwd` && cd $(srcdir) && \
        rm -rf $$backupdir && mkdir $$backupdir && \
        if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
          for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
            if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
          done; \
        else :; fi && \
-       cd "$$am__cwd"; \
        if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $@ $<; \
+        -o $@ `test -f 'ld.texinfo' || echo '$(srcdir)/'`ld.texinfo; \
        then \
          rc=0; \
-         cd $(srcdir); \
        else \
          rc=$$?; \
-         cd $(srcdir) && \
          $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
        fi; \
        rm -rf $$backupdir; exit $$rc
 
-.texinfo.dvi:
+ld.dvi: ld.texinfo  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2DVI) $<
+       $(TEXI2DVI) -o $@ `test -f 'ld.texinfo' || echo '$(srcdir)/'`ld.texinfo
 
-.texinfo.pdf:
+ld.pdf: ld.texinfo  
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-       $(TEXI2PDF) $<
+       $(TEXI2PDF) -o $@ `test -f 'ld.texinfo' || echo '$(srcdir)/'`ld.texinfo
 
-.texinfo.html:
+ld.html: ld.texinfo  
        rm -rf $(@:.html=.htp)
        if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-        -o $(@:.html=.htp) $<; \
+        -o $(@:.html=.htp) `test -f 'ld.texinfo' || echo '$(srcdir)/'`ld.texinfo; \
        then \
          rm -rf $@; \
          if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
@@ -848,10 +854,6 @@ distclean-libtool:
            rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
          exit 1; \
        fi
-$(srcdir)/ld.info: ld.texinfo 
-ld.dvi: ld.texinfo 
-ld.pdf: ld.texinfo 
-ld.html: ld.texinfo 
 .dvi.ps:
        TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
        $(DVIPS) -o $@ $<
@@ -2560,7 +2562,7 @@ ldver.texi: $(srcdir)/../bfd/configure
        eval `grep '^ *VERSION=' $(srcdir)/../bfd/configure`; \
          echo "@set VERSION $$VERSION" > $@
 
-$(srcdir)/ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
+ld.info ld.dvi ld.html: $(srcdir)/ld.texinfo configdoc.texi ldver.texi
 
 # Build the man page from the texinfo file
 # The sed command removes the no-adjust Nroff command so that
index 1bae89e..adedb7f 100755 (executable)
@@ -309,7 +309,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL use_sysroot TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE WARN_CFLAGS NO_WERROR USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE YACC LEX LEXLIB LEX_OUTPUT_ROOT MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT HDEFINES HOSTING_CRT0 HOSTING_LIBS NATIVE_LIB_DIRS CPP EGREP STRINGIFY EMUL EMULATION_OFILES EMUL_EXTRA_OFILES LIB_PATH EMULATION_LIBPATH TESTBFDLIB datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE LN_S RANLIB ac_ct_RANLIB LIBTOOL use_sysroot TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE WARN_CFLAGS NO_WERROR USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT MKINSTALLDIRS MSGFMT MSGMERGE YACC LEX LEXLIB LEX_OUTPUT_ROOT MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT GENINSRC_NEVER_TRUE GENINSRC_NEVER_FALSE HDEFINES HOSTING_CRT0 HOSTING_LIBS NATIVE_LIB_DIRS CPP EGREP STRINGIFY EMUL EMULATION_OFILES EMUL_EXTRA_OFILES LIB_PATH EMULATION_LIBPATH TESTBFDLIB datarootdir docdir htmldir LIBOBJS LTLIBOBJS'
 ac_subst_files='TDIRS'
 
 # Initialize some variables set by options.
@@ -5832,6 +5832,16 @@ fi
 
 
 
+
+if false; then
+  GENINSRC_NEVER_TRUE=
+  GENINSRC_NEVER_FALSE='#'
+else
+  GENINSRC_NEVER_TRUE='#'
+  GENINSRC_NEVER_FALSE=
+fi
+
+
 . ${srcdir}/configure.host
 
 
@@ -8063,6 +8073,13 @@ echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${GENINSRC_NEVER_TRUE}" && test -z "${GENINSRC_NEVER_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GENINSRC_NEVER\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -8685,6 +8702,8 @@ s,@LEX_OUTPUT_ROOT@,$LEX_OUTPUT_ROOT,;t t
 s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
 s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
 s,@MAINT@,$MAINT,;t t
+s,@GENINSRC_NEVER_TRUE@,$GENINSRC_NEVER_TRUE,;t t
+s,@GENINSRC_NEVER_FALSE@,$GENINSRC_NEVER_FALSE,;t t
 s,@HDEFINES@,$HDEFINES,;t t
 s,@HOSTING_CRT0@,$HOSTING_CRT0,;t t
 s,@HOSTING_LIBS@,$HOSTING_LIBS,;t t
index 3d4767c..c5de857 100644 (file)
@@ -92,6 +92,7 @@ AC_PROG_YACC
 AM_PROG_LEX
 
 AM_MAINTAINER_MODE
+AM_CONDITIONAL(GENINSRC_NEVER, false)
 
 . ${srcdir}/configure.host
 
index 3284f3f..b4ffbb7 100644 (file)
@@ -73,7 +73,7 @@ INSTOBJEXT = @INSTOBJEXT@
        $(MSGFMT) -o $@ $<
 
 .po.gmo:
-       file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+       file=`echo $* | sed 's,.*/,,'`.gmo \
          && rm -f $$file && $(GMSGFMT) -o $$file $<
 
 .po.cat:
index 7a9ee7f..5302b2e 100644 (file)
@@ -1,3 +1,7 @@
+2006-12-11  Daniel Jacobowitz  <dan@codesourcery.com>
+
+       * po/Make-in (.po.gmo): Put gmo files in objdir.
+
 2006-12-09  H.J. Lu  <hongjiu.lu@intel.com>
 
        * i386-dis.c (X86_64_1): New.
index c2072dd..9bc5bb1 100644 (file)
@@ -73,7 +73,7 @@ INSTOBJEXT = @INSTOBJEXT@
        $(MSGFMT) -o $@ $<
 
 .po.gmo:
-       file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
+       file=`echo $* | sed 's,.*/,,'`.gmo \
          && rm -f $$file && $(GMSGFMT) -o $$file $<
 
 .po.cat: