REGINFO_SENTINEL
};
+#ifndef CONFIG_USER_ONLY
+
+static uint64_t gt_get_countervalue(CPUARMState *env)
+{
+ return qemu_get_clock_ns(vm_clock) / GTIMER_SCALE;
+}
+
+static void gt_recalc_timer(ARMCPU *cpu, int timeridx)
+{
+ ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx];
+
+ if (gt->ctl & 1) {
+ /* Timer enabled: calculate and set current ISTATUS, irq, and
+ * reset timer to when ISTATUS next has to change
+ */
+ uint64_t count = gt_get_countervalue(&cpu->env);
+ /* Note that this must be unsigned 64 bit arithmetic: */
+ int istatus = count >= gt->cval;
+ uint64_t nexttick;
+
+ gt->ctl = deposit32(gt->ctl, 2, 1, istatus);
+ qemu_set_irq(cpu->gt_timer_outputs[timeridx],
+ (istatus && !(gt->ctl & 2)));
+ if (istatus) {
+ /* Next transition is when count rolls back over to zero */
+ nexttick = UINT64_MAX;
+ } else {
+ /* Next transition is when we hit cval */
+ nexttick = gt->cval;
+ }
+ /* Note that the desired next expiry time might be beyond the
+ * signed-64-bit range of a QEMUTimer -- in this case we just
+ * set the timer for as far in the future as possible. When the
+ * timer expires we will reset the timer for any remaining period.
+ */
+ if (nexttick > INT64_MAX / GTIMER_SCALE) {
+ nexttick = INT64_MAX / GTIMER_SCALE;
+ }
+ qemu_mod_timer(cpu->gt_timer[timeridx], nexttick);
+ } else {
+ /* Timer disabled: ISTATUS and timer output always clear */
+ gt->ctl &= ~4;
+ qemu_set_irq(cpu->gt_timer_outputs[timeridx], 0);
+ qemu_del_timer(cpu->gt_timer[timeridx]);
+ }
+}
+
+static int gt_cntfrq_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ /* Not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero */
+ if (arm_current_pl(env) == 0 && !extract32(env->cp15.c14_cntkctl, 0, 2)) {
+ return EXCP_UDEF;
+ }
+ *value = env->cp15.c14_cntfrq;
+ return 0;
+}
+
+static void gt_cnt_reset(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ int timeridx = ri->opc1 & 1;
+
+ qemu_del_timer(cpu->gt_timer[timeridx]);
+}
+
+static int gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ int timeridx = ri->opc1 & 1;
+
+ if (arm_current_pl(env) == 0 &&
+ !extract32(env->cp15.c14_cntkctl, timeridx, 1)) {
+ return EXCP_UDEF;
+ }
+ *value = gt_get_countervalue(env);
+ return 0;
+}
+
+static int gt_cval_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ int timeridx = ri->opc1 & 1;
+
+ if (arm_current_pl(env) == 0 &&
+ !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) {
+ return EXCP_UDEF;
+ }
+ *value = env->cp15.c14_timer[timeridx].cval;
+ return 0;
+}
+
+static int gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ int timeridx = ri->opc1 & 1;
+
+ env->cp15.c14_timer[timeridx].cval = value;
+ gt_recalc_timer(arm_env_get_cpu(env), timeridx);
+ return 0;
+}
+static int gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ int timeridx = ri->crm & 1;
+
+ if (arm_current_pl(env) == 0 &&
+ !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) {
+ return EXCP_UDEF;
+ }
+ *value = (uint32_t)(env->cp15.c14_timer[timeridx].cval -
+ gt_get_countervalue(env));
+ return 0;
+}
+
+static int gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ int timeridx = ri->crm & 1;
+
+ env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) +
+ + sextract64(value, 0, 32);
+ gt_recalc_timer(arm_env_get_cpu(env), timeridx);
+ return 0;
+}
+
+static int gt_ctl_read(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t *value)
+{
+ int timeridx = ri->crm & 1;
+
+ if (arm_current_pl(env) == 0 &&
+ !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) {
+ return EXCP_UDEF;
+ }
+ *value = env->cp15.c14_timer[timeridx].ctl;
+ return 0;
+}
+
+static int gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ int timeridx = ri->crm & 1;
+ uint32_t oldval = env->cp15.c14_timer[timeridx].ctl;
+
+ env->cp15.c14_timer[timeridx].ctl = value & 3;
+ if ((oldval ^ value) & 1) {
+ /* Enable toggled */
+ gt_recalc_timer(cpu, timeridx);
+ } else if ((oldval & value) & 2) {
+ /* IMASK toggled: don't need to recalculate,
+ * just set the interrupt line based on ISTATUS
+ */
+ qemu_set_irq(cpu->gt_timer_outputs[timeridx],
+ (oldval & 4) && (value & 2));
+ }
+ return 0;
+}
+
+void arm_gt_ptimer_cb(void *opaque)
+{
+ ARMCPU *cpu = opaque;
+
+ gt_recalc_timer(cpu, GTIMER_PHYS);
+}
+
+void arm_gt_vtimer_cb(void *opaque)
+{
+ ARMCPU *cpu = opaque;
+
+ gt_recalc_timer(cpu, GTIMER_VIRT);
+}
+
static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
- /* Dummy implementation: RAZ/WI the whole crn=14 space */
- { .name = "GENERIC_TIMER", .cp = 15, .crn = 14,
- .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY,
- .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE,
- .resetvalue = 0 },
+ /* Note that CNTFRQ is purely reads-as-written for the benefit
+ * of software; writing it doesn't actually change the timer frequency.
+ * Our reset value matches the fixed frequency we implement the timer at.
+ */
+ { .name = "CNTFRQ", .cp = 15, .crn = 14, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW | PL0_R,
+ .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq),
+ .resetvalue = (1000 * 1000 * 1000) / GTIMER_SCALE,
+ .readfn = gt_cntfrq_read, .raw_readfn = raw_read,
+ },
+ /* overall control: mostly access permissions */
+ { .name = "CNTKCTL", .cp = 15, .crn = 14, .crm = 1, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.c14_cntkctl),
+ .resetvalue = 0,
+ },
+ /* per-timer control */
+ { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1,
+ .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
+ .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl),
+ .resetvalue = 0,
+ .readfn = gt_ctl_read, .writefn = gt_ctl_write,
+ .raw_readfn = raw_read, .raw_writefn = raw_write,
+ },
+ { .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1,
+ .type = ARM_CP_IO, .access = PL1_RW | PL0_R,
+ .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl),
+ .resetvalue = 0,
+ .readfn = gt_ctl_read, .writefn = gt_ctl_write,
+ .raw_readfn = raw_read, .raw_writefn = raw_write,
+ },
+ /* TimerValue views: a 32 bit downcounting view of the underlying state */
+ { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0,
+ .type = ARM_CP_NO_MIGRATE | ARM_CP_IO, .access = PL1_RW | PL0_R,
+ .readfn = gt_tval_read, .writefn = gt_tval_write,
+ },
+ { .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0,
+ .type = ARM_CP_NO_MIGRATE | ARM_CP_IO, .access = PL1_RW | PL0_R,
+ .readfn = gt_tval_read, .writefn = gt_tval_write,
+ },
+ /* The counter itself */
+ { .name = "CNTPCT", .cp = 15, .crm = 14, .opc1 = 0,
+ .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE | ARM_CP_IO,
+ .readfn = gt_cnt_read, .resetfn = gt_cnt_reset,
+ },
+ { .name = "CNTVCT", .cp = 15, .crm = 14, .opc1 = 1,
+ .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE | ARM_CP_IO,
+ .readfn = gt_cnt_read, .resetfn = gt_cnt_reset,
+ },
+ /* Comparison value, indicating when the timer goes off */
+ { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2,
+ .access = PL1_RW | PL0_R,
+ .type = ARM_CP_64BIT | ARM_CP_IO,
+ .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval),
+ .resetvalue = 0,
+ .readfn = gt_cval_read, .writefn = gt_cval_write,
+ .raw_readfn = raw_read, .raw_writefn = raw_write,
+ },
+ { .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3,
+ .access = PL1_RW | PL0_R,
+ .type = ARM_CP_64BIT | ARM_CP_IO,
+ .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval),
+ .resetvalue = 0,
+ .readfn = gt_cval_read, .writefn = gt_cval_write,
+ .raw_readfn = raw_read, .raw_writefn = raw_write,
+ },
REGINFO_SENTINEL
};
+#else
+/* In user-mode none of the generic timer registers are accessible,
+ * and their implementation depends on vm_clock and qdev gpio outputs,
+ * so instead just don't register any of them.
+ */
+static const ARMCPRegInfo generic_timer_cp_reginfo[] = {
+ REGINFO_SENTINEL
+};
+
+#endif
+
static int par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
{
if (arm_feature(env, ARM_FEATURE_LPAE)) {