ath9k: Process BTCOEX interrupts using a helper

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 2ede897..acf5372 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -460,6 +460,7 @@ void ath9k_start_btcoex(struct ath_softc *sc);
 void ath9k_stop_btcoex(struct ath_softc *sc);
 void ath9k_btcoex_timer_resume(struct ath_softc *sc);
 void ath9k_btcoex_timer_pause(struct ath_softc *sc);
+void ath9k_btcoex_handle_interrupt(struct ath_softc *sc, u32 status);
 
 /********************/
 /*   LED Control    */

diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 1ca2ca5..a24aa67 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -318,6 +318,18 @@ void ath9k_btcoex_timer_pause(struct ath_softc *sc)
        btcoex->hw_timer_enabled = false;
 }
 
+void ath9k_btcoex_handle_interrupt(struct ath_softc *sc, u32 status)
+{
+       struct ath_hw *ah = sc->sc_ah;
+
+       if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
+               if (status & ATH9K_INT_GENTIMER)
+                       ath_gen_timer_isr(sc->sc_ah);
+
+       if ((status & ATH9K_INT_MCI) && ATH9K_HW_CAP_MCI)
+               ath_mci_intr(sc);
+}
+
 void ath9k_start_btcoex(struct ath_softc *sc)
 {
        struct ath_hw *ah = sc->sc_ah;

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 82c36a9..02e95c8 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -735,12 +735,7 @@ void ath9k_tasklet(unsigned long data)
                        ath_tx_tasklet(sc);
        }
 
-       if (ath9k_hw_get_btcoex_scheme(ah) == ATH_BTCOEX_CFG_3WIRE)
-               if (status & ATH9K_INT_GENTIMER)
-                       ath_gen_timer_isr(sc->sc_ah);
-
-       if ((status & ATH9K_INT_MCI) && ATH9K_HW_CAP_MCI)
-               ath_mci_intr(sc);
+       ath9k_btcoex_handle_interrupt(sc, status);
 
 out:
        /* re-enable hardware interrupt */