+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * rcar_gen2 Core CPG Clocks
- *
- * Copyright (C) 2013 Ideas On Board SPRL
- *
- * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/renesas.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/math64.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/soc/renesas/rcar-rst.h>
-
-struct rcar_gen2_cpg {
- struct clk_onecell_data data;
- spinlock_t lock;
- void __iomem *reg;
-};
-
-#define CPG_FRQCRB 0x00000004
-#define CPG_FRQCRB_KICK BIT(31)
-#define CPG_SDCKCR 0x00000074
-#define CPG_PLL0CR 0x000000d8
-#define CPG_FRQCRC 0x000000e0
-#define CPG_FRQCRC_ZFC_MASK (0x1f << 8)
-#define CPG_FRQCRC_ZFC_SHIFT 8
-#define CPG_ADSPCKCR 0x0000025c
-#define CPG_RCANCKCR 0x00000270
-
-/* -----------------------------------------------------------------------------
- * Z Clock
- *
- * Traits of this clock:
- * prepare - clk_prepare only ensures that parents are prepared
- * enable - clk_enable only ensures that parents are enabled
- * rate - rate is adjustable. clk->rate = parent->rate * mult / 32
- * parent - fixed parent. No clk_set_parent support
- */
-
-struct cpg_z_clk {
- struct clk_hw hw;
- void __iomem *reg;
- void __iomem *kick_reg;
-};
-
-#define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw)
-
-static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct cpg_z_clk *zclk = to_z_clk(hw);
- unsigned int mult;
- unsigned int val;
-
- val = (readl(zclk->reg) & CPG_FRQCRC_ZFC_MASK) >> CPG_FRQCRC_ZFC_SHIFT;
- mult = 32 - val;
-
- return div_u64((u64)parent_rate * mult, 32);
-}
-
-static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
-{
- unsigned long prate = *parent_rate;
- unsigned int mult;
-
- if (!prate)
- prate = 1;
-
- mult = div_u64((u64)rate * 32, prate);
- mult = clamp(mult, 1U, 32U);
-
- return *parent_rate / 32 * mult;
-}
-
-static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct cpg_z_clk *zclk = to_z_clk(hw);
- unsigned int mult;
- u32 val, kick;
- unsigned int i;
-
- mult = div_u64((u64)rate * 32, parent_rate);
- mult = clamp(mult, 1U, 32U);
-
- if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK)
- return -EBUSY;
-
- val = readl(zclk->reg);
- val &= ~CPG_FRQCRC_ZFC_MASK;
- val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT;
- writel(val, zclk->reg);
-
- /*
- * Set KICK bit in FRQCRB to update hardware setting and wait for
- * clock change completion.
- */
- kick = readl(zclk->kick_reg);
- kick |= CPG_FRQCRB_KICK;
- writel(kick, zclk->kick_reg);
-
- /*
- * Note: There is no HW information about the worst case latency.
- *
- * Using experimental measurements, it seems that no more than
- * ~10 iterations are needed, independently of the CPU rate.
- * Since this value might be dependent on external xtal rate, pll1
- * rate or even the other emulation clocks rate, use 1000 as a
- * "super" safe value.
- */
- for (i = 1000; i; i--) {
- if (!(readl(zclk->kick_reg) & CPG_FRQCRB_KICK))
- return 0;
-
- cpu_relax();
- }
-
- return -ETIMEDOUT;
-}
-
-static const struct clk_ops cpg_z_clk_ops = {
- .recalc_rate = cpg_z_clk_recalc_rate,
- .round_rate = cpg_z_clk_round_rate,
- .set_rate = cpg_z_clk_set_rate,
-};
-
-static struct clk * __init cpg_z_clk_register(struct rcar_gen2_cpg *cpg)
-{
- static const char *parent_name = "pll0";
- struct clk_init_data init;
- struct cpg_z_clk *zclk;
- struct clk *clk;
-
- zclk = kzalloc(sizeof(*zclk), GFP_KERNEL);
- if (!zclk)
- return ERR_PTR(-ENOMEM);
-
- init.name = "z";
- init.ops = &cpg_z_clk_ops;
- init.flags = 0;
- init.parent_names = &parent_name;
- init.num_parents = 1;
-
- zclk->reg = cpg->reg + CPG_FRQCRC;
- zclk->kick_reg = cpg->reg + CPG_FRQCRB;
- zclk->hw.init = &init;
-
- clk = clk_register(NULL, &zclk->hw);
- if (IS_ERR(clk))
- kfree(zclk);
-
- return clk;
-}
-
-static struct clk * __init cpg_rcan_clk_register(struct rcar_gen2_cpg *cpg,
- struct device_node *np)
-{
- const char *parent_name = of_clk_get_parent_name(np, 1);
- struct clk_fixed_factor *fixed;
- struct clk_gate *gate;
- struct clk *clk;
-
- fixed = kzalloc(sizeof(*fixed), GFP_KERNEL);
- if (!fixed)
- return ERR_PTR(-ENOMEM);
-
- fixed->mult = 1;
- fixed->div = 6;
-
- gate = kzalloc(sizeof(*gate), GFP_KERNEL);
- if (!gate) {
- kfree(fixed);
- return ERR_PTR(-ENOMEM);
- }
-
- gate->reg = cpg->reg + CPG_RCANCKCR;
- gate->bit_idx = 8;
- gate->flags = CLK_GATE_SET_TO_DISABLE;
- gate->lock = &cpg->lock;
-
- clk = clk_register_composite(NULL, "rcan", &parent_name, 1, NULL, NULL,
- &fixed->hw, &clk_fixed_factor_ops,
- &gate->hw, &clk_gate_ops, 0);
- if (IS_ERR(clk)) {
- kfree(gate);
- kfree(fixed);
- }
-
- return clk;
-}
-
-/* ADSP divisors */
-static const struct clk_div_table cpg_adsp_div_table[] = {
- { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 },
- { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
- { 10, 36 }, { 11, 48 }, { 0, 0 },
-};
-
-static struct clk * __init cpg_adsp_clk_register(struct rcar_gen2_cpg *cpg)
-{
- const char *parent_name = "pll1";
- struct clk_divider *div;
- struct clk_gate *gate;
- struct clk *clk;
-
- div = kzalloc(sizeof(*div), GFP_KERNEL);
- if (!div)
- return ERR_PTR(-ENOMEM);
-
- div->reg = cpg->reg + CPG_ADSPCKCR;
- div->width = 4;
- div->table = cpg_adsp_div_table;
- div->lock = &cpg->lock;
-
- gate = kzalloc(sizeof(*gate), GFP_KERNEL);
- if (!gate) {
- kfree(div);
- return ERR_PTR(-ENOMEM);
- }
-
- gate->reg = cpg->reg + CPG_ADSPCKCR;
- gate->bit_idx = 8;
- gate->flags = CLK_GATE_SET_TO_DISABLE;
- gate->lock = &cpg->lock;
-
- clk = clk_register_composite(NULL, "adsp", &parent_name, 1, NULL, NULL,
- &div->hw, &clk_divider_ops,
- &gate->hw, &clk_gate_ops, 0);
- if (IS_ERR(clk)) {
- kfree(gate);
- kfree(div);
- }
-
- return clk;
-}
-
-/* -----------------------------------------------------------------------------
- * CPG Clock Data
- */
-
-/*
- * MD EXTAL PLL0 PLL1 PLL3
- * 14 13 19 (MHz) *1 *1
- *---------------------------------------------------
- * 0 0 0 15 x 1 x172/2 x208/2 x106
- * 0 0 1 15 x 1 x172/2 x208/2 x88
- * 0 1 0 20 x 1 x130/2 x156/2 x80
- * 0 1 1 20 x 1 x130/2 x156/2 x66
- * 1 0 0 26 / 2 x200/2 x240/2 x122
- * 1 0 1 26 / 2 x200/2 x240/2 x102
- * 1 1 0 30 / 2 x172/2 x208/2 x106
- * 1 1 1 30 / 2 x172/2 x208/2 x88
- *
- * *1 : Table 7.6 indicates VCO output (PLLx = VCO/2)
- */
-#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
- (((md) & BIT(13)) >> 12) | \
- (((md) & BIT(19)) >> 19))
-struct cpg_pll_config {
- unsigned int extal_div;
- unsigned int pll1_mult;
- unsigned int pll3_mult;
- unsigned int pll0_mult; /* For R-Car V2H and E2 only */
-};
-
-static const struct cpg_pll_config cpg_pll_configs[8] __initconst = {
- { 1, 208, 106, 200 }, { 1, 208, 88, 200 },
- { 1, 156, 80, 150 }, { 1, 156, 66, 150 },
- { 2, 240, 122, 230 }, { 2, 240, 102, 230 },
- { 2, 208, 106, 200 }, { 2, 208, 88, 200 },
-};
-
-/* SDHI divisors */
-static const struct clk_div_table cpg_sdh_div_table[] = {
- { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 },
- { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 },
- { 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 },
-};
-
-static const struct clk_div_table cpg_sd01_div_table[] = {
- { 4, 8 },
- { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
- { 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 },
-};
-
-/* -----------------------------------------------------------------------------
- * Initialization
- */
-
-static u32 cpg_mode __initdata;
-
-static const char * const pll0_mult_match[] = {
- "renesas,r8a7792-cpg-clocks",
- "renesas,r8a7794-cpg-clocks",
- NULL
-};
-
-static struct clk * __init
-rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
- const struct cpg_pll_config *config,
- const char *name)
-{
- const struct clk_div_table *table = NULL;
- const char *parent_name;
- unsigned int shift;
- unsigned int mult = 1;
- unsigned int div = 1;
-
- if (!strcmp(name, "main")) {
- parent_name = of_clk_get_parent_name(np, 0);
- div = config->extal_div;
- } else if (!strcmp(name, "pll0")) {
- /* PLL0 is a configurable multiplier clock. Register it as a
- * fixed factor clock for now as there's no generic multiplier
- * clock implementation and we currently have no need to change
- * the multiplier value.
- */
- if (of_device_compatible_match(np, pll0_mult_match)) {
- /* R-Car V2H and E2 do not have PLL0CR */
- mult = config->pll0_mult;
- div = 3;
- } else {
- u32 value = readl(cpg->reg + CPG_PLL0CR);
- mult = ((value >> 24) & ((1 << 7) - 1)) + 1;
- }
- parent_name = "main";
- } else if (!strcmp(name, "pll1")) {
- parent_name = "main";
- mult = config->pll1_mult / 2;
- } else if (!strcmp(name, "pll3")) {
- parent_name = "main";
- mult = config->pll3_mult;
- } else if (!strcmp(name, "lb")) {
- parent_name = "pll1";
- div = cpg_mode & BIT(18) ? 36 : 24;
- } else if (!strcmp(name, "qspi")) {
- parent_name = "pll1_div2";
- div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2)
- ? 8 : 10;
- } else if (!strcmp(name, "sdh")) {
- parent_name = "pll1";
- table = cpg_sdh_div_table;
- shift = 8;
- } else if (!strcmp(name, "sd0")) {
- parent_name = "pll1";
- table = cpg_sd01_div_table;
- shift = 4;
- } else if (!strcmp(name, "sd1")) {
- parent_name = "pll1";
- table = cpg_sd01_div_table;
- shift = 0;
- } else if (!strcmp(name, "z")) {
- return cpg_z_clk_register(cpg);
- } else if (!strcmp(name, "rcan")) {
- return cpg_rcan_clk_register(cpg, np);
- } else if (!strcmp(name, "adsp")) {
- return cpg_adsp_clk_register(cpg);
- } else {
- return ERR_PTR(-EINVAL);
- }
-
- if (!table)
- return clk_register_fixed_factor(NULL, name, parent_name, 0,
- mult, div);
- else
- return clk_register_divider_table(NULL, name, parent_name, 0,
- cpg->reg + CPG_SDCKCR, shift,
- 4, 0, table, &cpg->lock);
-}
-
-/*
- * Reset register definitions.
- */
-#define MODEMR 0xe6160060
-
-static u32 __init rcar_gen2_read_mode_pins(void)
-{
- void __iomem *modemr = ioremap_nocache(MODEMR, 4);
- u32 mode;
-
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
- return mode;
-}
-
-static void __init rcar_gen2_cpg_clocks_init(struct device_node *np)
-{
- const struct cpg_pll_config *config;
- struct rcar_gen2_cpg *cpg;
- struct clk **clks;
- unsigned int i;
- int num_clks;
-
- if (rcar_rst_read_mode_pins(&cpg_mode)) {
- /* Backward-compatibility with old DT */
- pr_warn("%pOF: failed to obtain mode pins from RST\n", np);
- cpg_mode = rcar_gen2_read_mode_pins();
- }
-
- num_clks = of_property_count_strings(np, "clock-output-names");
- if (num_clks < 0) {
- pr_err("%s: failed to count clocks\n", __func__);
- return;
- }
-
- cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
- clks = kcalloc(num_clks, sizeof(*clks), GFP_KERNEL);
- if (cpg == NULL || clks == NULL) {
- /* We're leaking memory on purpose, there's no point in cleaning
- * up as the system won't boot anyway.
- */
- return;
- }
-
- spin_lock_init(&cpg->lock);
-
- cpg->data.clks = clks;
- cpg->data.clk_num = num_clks;
-
- cpg->reg = of_iomap(np, 0);
- if (WARN_ON(cpg->reg == NULL))
- return;
-
- config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
-
- for (i = 0; i < num_clks; ++i) {
- const char *name;
- struct clk *clk;
-
- of_property_read_string_index(np, "clock-output-names", i,
- &name);
-
- clk = rcar_gen2_cpg_register_clock(np, cpg, config, name);
- if (IS_ERR(clk))
- pr_err("%s: failed to register %pOFn %s clock (%ld)\n",
- __func__, np, name, PTR_ERR(clk));
- else
- cpg->data.clks[i] = clk;
- }
-
- of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
-
- cpg_mstp_add_clk_domain(np);
-}
-CLK_OF_DECLARE(rcar_gen2_cpg_clks, "renesas,rcar-gen2-cpg-clocks",
- rcar_gen2_cpg_clocks_init);
OSDN Git Service
