A default resolution in the ssd130x driver isn't set to an arbitrary 96x16
anymore. Instead is set to a width and height that's controller dependent.
The datasheets for the chips describes the following display resolutions:
- SH1106: 132 x 64 Dot Matrix OLED/PLED
- SSD1305: 132 x 64 Dot Matrix OLED/PLED
- SSD1306: 128 x 64 Dot Matrix OLED/PLED
- SSD1307: 128 x 39 Dot Matrix OLED/PLED
- SSD1309: 128 x 64 Dot Matrix OLED/PLED
Update DT schema to reflect what the driver does and make its users aware.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609170941.1150941-3-javierm@redhat.com
solomon,height:
$ref: /schemas/types.yaml#/definitions/uint32
- default: 16
description:
- Height in pixel of the screen driven by the controller
+ Height in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
solomon,width:
$ref: /schemas/types.yaml#/definitions/uint32
- default: 96
description:
- Width in pixel of the screen driven by the controller
+ Width in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
solomon,page-offset:
$ref: /schemas/types.yaml#/definitions/uint32
const: sinowealth,sh1106
then:
properties:
+ width:
+ default: 132
+ height:
+ default: 64
solomon,dclk-div:
default: 1
solomon,dclk-frq:
- solomon,ssd1305
then:
properties:
+ width:
+ default: 132
+ height:
+ default: 64
solomon,dclk-div:
default: 1
solomon,dclk-frq:
- solomon,ssd1306
then:
properties:
+ width:
+ default: 128
+ height:
+ default: 64
solomon,dclk-div:
default: 1
solomon,dclk-frq:
- solomon,ssd1307
then:
properties:
+ width:
+ default: 128
+ height:
+ default: 39
solomon,dclk-div:
default: 2
solomon,dclk-frq:
- solomon,ssd1309
then:
properties:
+ width:
+ default: 128
+ height:
+ default: 64
solomon,dclk-div:
default: 1
solomon,dclk-frq: