return;
}
-void rtl8180_irq_enable(struct net_device *dev)
-{
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
- priv->irq_enabled = 1;
- write_nic_word(dev, INTA_MASK, priv->irq_mask);
-}
-
void rtl8180_irq_disable(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
write_nic_byte(dev, EPROM_CMD, ecmd);
}
-void rtl8180_adapter_start(struct net_device *dev);
void rtl8180_beacon_tx_enable(struct net_device *dev);
void rtl8180_update_msr(struct net_device *dev)
priv->rf_set_chan(dev, priv->chan);
}
-void rtl8180_rx_enable(struct net_device *dev)
-{
- u8 cmd;
- u32 rxconf;
- /* for now we accept data, management & ctl frame*/
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
- rxconf = read_nic_dword(dev, RX_CONF);
- rxconf = rxconf & ~MAC_FILTER_MASK;
- rxconf = rxconf | (1<<ACCEPT_MNG_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_DATA_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_BCAST_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_MCAST_FRAME_SHIFT);
- if (dev->flags & IFF_PROMISC)
- DMESG("NIC in promisc mode");
-
- if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
- dev->flags & IFF_PROMISC) {
- rxconf = rxconf | (1<<ACCEPT_ALLMAC_FRAME_SHIFT);
- } else {
- rxconf = rxconf | (1<<ACCEPT_NICMAC_FRAME_SHIFT);
- }
-
- if (priv->ieee80211->iw_mode == IW_MODE_MONITOR) {
- rxconf = rxconf | (1<<ACCEPT_CTL_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_ICVERR_FRAME_SHIFT);
- rxconf = rxconf | (1<<ACCEPT_PWR_FRAME_SHIFT);
- }
-
- if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
- rxconf = rxconf | (1<<ACCEPT_CRCERR_FRAME_SHIFT);
-
- rxconf = rxconf & ~RX_FIFO_THRESHOLD_MASK;
- rxconf = rxconf | (RX_FIFO_THRESHOLD_NONE << RX_FIFO_THRESHOLD_SHIFT);
-
- rxconf = rxconf | (1<<RX_AUTORESETPHY_SHIFT);
- rxconf = rxconf & ~MAX_RX_DMA_MASK;
- rxconf = rxconf | (MAX_RX_DMA_2048<<MAX_RX_DMA_SHIFT);
-
- rxconf = rxconf | RCR_ONLYERLPKT;
-
- rxconf = rxconf & ~RCR_CS_MASK;
-
- write_nic_dword(dev, RX_CONF, rxconf);
-
- fix_rx_fifo(dev);
-
- cmd = read_nic_byte(dev, CMD);
- write_nic_byte(dev, CMD, cmd | (1<<CMD_RX_ENABLE_SHIFT));
-}
-
void set_nic_txring(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
write_nic_dword(dev, TX_CONF, txconf);
}
-void rtl8180_tx_enable(struct net_device *dev)
-{
- u8 cmd;
- u8 tx_agc_ctl;
- u8 byte;
- u32 txconf;
- struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
- txconf = read_nic_dword(dev, TX_CONF);
-
- byte = read_nic_byte(dev, CW_CONF);
- byte &= ~(1<<CW_CONF_PERPACKET_CW_SHIFT);
- byte &= ~(1<<CW_CONF_PERPACKET_RETRY_SHIFT);
- write_nic_byte(dev, CW_CONF, byte);
-
- tx_agc_ctl = read_nic_byte(dev, TX_AGC_CTL);
- tx_agc_ctl &= ~(1<<TX_AGC_CTL_PERPACKET_GAIN_SHIFT);
- tx_agc_ctl &= ~(1<<TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT);
- tx_agc_ctl |= (1<<TX_AGC_CTL_FEEDBACK_ANT);
- write_nic_byte(dev, TX_AGC_CTL, tx_agc_ctl);
- write_nic_byte(dev, 0xec, 0x3f); /* Disable early TX */
-
- txconf = txconf & ~(1<<TCR_PROBE_NOTIMESTAMP_SHIFT);
-
- txconf = txconf & ~TX_LOOPBACK_MASK;
- txconf = txconf | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT);
- txconf = txconf & ~TCR_DPRETRY_MASK;
- txconf = txconf & ~TCR_RTSRETRY_MASK;
- txconf = txconf | (priv->retry_data<<TX_DPRETRY_SHIFT);
- txconf = txconf | (priv->retry_rts<<TX_RTSRETRY_SHIFT);
- txconf = txconf & ~(1<<TX_NOCRC_SHIFT);
-
- if (priv->hw_plcp_len)
- txconf = txconf & ~TCR_PLCP_LEN;
- else
- txconf = txconf | TCR_PLCP_LEN;
-
- txconf = txconf & ~TCR_MXDMA_MASK;
- txconf = txconf | (TCR_MXDMA_2048<<TCR_MXDMA_SHIFT);
- txconf = txconf | TCR_CWMIN;
- txconf = txconf | TCR_DISCW;
-
- txconf = txconf | (1 << TX_NOICV_SHIFT);
-
- write_nic_dword(dev, TX_CONF, txconf);
-
- fix_tx_fifo(dev);
-
- cmd = read_nic_byte(dev, CMD);
- write_nic_byte(dev, CMD, cmd | (1<<CMD_TX_ENABLE_SHIFT));
-
- write_nic_dword(dev, TX_CONF, txconf);
-}
-
void rtl8180_beacon_tx_enable(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
write_nic_word(dev, BRSR, word);
}
-void rtl8180_adapter_start(struct net_device *dev)
-{
- struct r8180_priv *priv = ieee80211_priv(dev);
-
- rtl8180_rtx_disable(dev);
- rtl8180_reset(dev);
-
- /* enable beacon timeout, beacon TX ok and err
- * LP tx ok and err, HP TX ok and err, NP TX ok and err,
- * RX ok and ERR, and GP timer
- */
- priv->irq_mask = 0x6fcf;
-
- priv->dma_poll_mask = 0;
-
- rtl8180_beacon_tx_disable(dev);
-
- rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
- write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
- write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
- rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
- rtl8180_update_msr(dev);
-
- /* These might be unnecessary since we do in rx_enable / tx_enable */
- fix_rx_fifo(dev);
- fix_tx_fifo(dev);
-
- rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-
- /*
- * The following is very strange. seems to be that 1 means test mode,
- * but we need to acknowledges the nic when a packet is ready
- * although we set it to 0
- */
-
- write_nic_byte(dev,
- CONFIG2, read_nic_byte(dev, CONFIG2) & ~\
- (1<<CONFIG2_DMA_POLLING_MODE_SHIFT));
- /* ^the nic isn't in test mode */
- write_nic_byte(dev,
- CONFIG2, read_nic_byte(dev, CONFIG2)|(1<<4));
-
- rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
- write_nic_dword(dev, INT_TIMEOUT, 0);
-
- write_nic_byte(dev, WPA_CONFIG, 0);
-
- rtl8180_no_hw_wep(dev);
-
- rtl8185_set_rate(dev);
- write_nic_byte(dev, RATE_FALLBACK, 0x81);
-
- write_nic_byte(dev, GP_ENABLE, read_nic_byte(dev, GP_ENABLE) & ~(1<<6));
-
- /* FIXME cfg 3 ClkRun enable - isn't it ReadOnly ? */
- rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
- write_nic_byte(dev, CONFIG3, read_nic_byte(dev, CONFIG3)
- | (1 << CONFIG3_CLKRUN_SHIFT));
- rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
- priv->rf_init(dev);
-
- if (priv->rf_set_sens != NULL)
- priv->rf_set_sens(dev, priv->sens);
- rtl8180_irq_enable(dev);
-
- netif_start_queue(dev);
-}
-
/*
* This configures registers for beacon tx and enables it via
* rtl8180_beacon_tx_enable(). rtl8180_beacon_tx_disable() might
OSDN Git Service
