OSDN Git Service

pwm: Add the pwm_is_enabled() helper
authorBoris Brezillon <boris.brezillon@free-electrons.com>
Wed, 1 Jul 2015 08:21:47 +0000 (10:21 +0200)
committerThierry Reding <thierry.reding@gmail.com>
Mon, 20 Jul 2015 07:46:06 +0000 (09:46 +0200)
Some PWM drivers are testing the PWMF_ENABLED flag. Create a helper
function to hide the logic behind enabled test. This will allow us to
smoothly move from the current approach to an atomic PWM update
approach.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
13 files changed:
drivers/pwm/core.c
drivers/pwm/pwm-atmel-tcb.c
drivers/pwm/pwm-atmel.c
drivers/pwm/pwm-bcm-kona.c
drivers/pwm/pwm-ep93xx.c
drivers/pwm/pwm-imx.c
drivers/pwm/pwm-mxs.c
drivers/pwm/pwm-renesas-tpu.c
drivers/pwm/pwm-tegra.c
drivers/pwm/pwm-tiecap.c
drivers/pwm/pwm-tiehrpwm.c
drivers/pwm/sysfs.c
include/linux/pwm.h

index 3a7769f..f7c11d2 100644 (file)
@@ -455,7 +455,7 @@ int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
        if (!pwm->chip->ops->set_polarity)
                return -ENOSYS;
 
-       if (test_bit(PWMF_ENABLED, &pwm->flags))
+       if (pwm_is_enabled(pwm))
                return -EBUSY;
 
        err = pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity);
@@ -853,7 +853,7 @@ static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
                if (test_bit(PWMF_REQUESTED, &pwm->flags))
                        seq_puts(s, " requested");
 
-               if (test_bit(PWMF_ENABLED, &pwm->flags))
+               if (pwm_is_enabled(pwm))
                        seq_puts(s, " enabled");
 
                seq_puts(s, "\n");
index d14e067..6da01b3 100644 (file)
@@ -347,7 +347,7 @@ static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
        tcbpwm->duty = duty;
 
        /* If the PWM is enabled, call enable to apply the new conf */
-       if (test_bit(PWMF_ENABLED, &pwm->flags))
+       if (pwm_is_enabled(pwm))
                atmel_tcb_pwm_enable(chip, pwm);
 
        return 0;
index a947c90..b3b294d 100644 (file)
@@ -114,7 +114,7 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
        u32 val;
        int ret;
 
-       if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) {
+       if (pwm_is_enabled(pwm) && (period_ns != pwm->period)) {
                dev_err(chip->dev, "cannot change PWM period while enabled\n");
                return -EBUSY;
        }
@@ -176,7 +176,7 @@ static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm,
         * If the PWM channel is enabled, only update CDTY by using the update
         * register, it needs to set bit 10 of CMR to 0
         */
-       if (test_bit(PWMF_ENABLED, &pwm->flags))
+       if (pwm_is_enabled(pwm))
                return;
        /*
         * If the PWM channel is disabled, write value to duty and period
@@ -191,7 +191,7 @@ static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm,
 {
        struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
 
-       if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (pwm_is_enabled(pwm)) {
                /*
                 * If the PWM channel is enabled, using the duty update register
                 * to update the value.
index 7af8fea..dfdcf88 100644 (file)
@@ -134,7 +134,7 @@ static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
        }
 
        /* If the PWM channel is enabled, write the settings to the HW */
-       if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (pwm_is_enabled(pwm)) {
                value = readl(kp->base + PRESCALE_OFFSET);
                value &= ~PRESCALE_MASK(chan);
                value |= prescale << PRESCALE_SHIFT(chan);
@@ -287,7 +287,7 @@ static int kona_pwmc_remove(struct platform_device *pdev)
        unsigned int chan;
 
        for (chan = 0; chan < kp->chip.npwm; chan++)
-               if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags))
+               if (pwm_is_enabled(&kp->chip.pwms[chan]))
                        clk_disable_unprepare(kp->clk);
 
        return pwmchip_remove(&kp->chip);
index e593e9c..bbf10ae 100644 (file)
@@ -82,7 +82,7 @@ static int ep93xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
         * The clock needs to be enabled to access the PWM registers.
         * Configuration can be changed at any time.
         */
-       if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (!pwm_is_enabled(pwm)) {
                ret = clk_enable(ep93xx_pwm->clk);
                if (ret)
                        return ret;
@@ -113,7 +113,7 @@ static int ep93xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
                ret = -EINVAL;
        }
 
-       if (!test_bit(PWMF_ENABLED, &pwm->flags))
+       if (!pwm_is_enabled(pwm))
                clk_disable(ep93xx_pwm->clk);
 
        return ret;
index 66d6f0c..008dc64 100644 (file)
@@ -114,7 +114,7 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
        unsigned long long c;
        unsigned long period_cycles, duty_cycles, prescale;
        unsigned int period_ms;
-       bool enable = test_bit(PWMF_ENABLED, &pwm->flags);
+       bool enable = pwm_is_enabled(pwm);
        int wait_count = 0, fifoav;
        u32 cr, sr;
 
index b430811..9a59632 100644 (file)
@@ -77,7 +77,7 @@ static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
         * If the PWM channel is disabled, make sure to turn on the clock
         * before writing the register. Otherwise, keep it enabled.
         */
-       if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (!pwm_is_enabled(pwm)) {
                ret = clk_prepare_enable(mxs->clk);
                if (ret)
                        return ret;
@@ -92,7 +92,7 @@ static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
        /*
         * If the PWM is not enabled, turn the clock off again to save power.
         */
-       if (!test_bit(PWMF_ENABLED, &pwm->flags))
+       if (!pwm_is_enabled(pwm))
                clk_disable_unprepare(mxs->clk);
 
        return 0;
index ee63f9e..075c1a7 100644 (file)
@@ -301,7 +301,7 @@ static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm,
        pwm->duty = duty;
 
        /* If the channel is disabled we're done. */
-       if (!test_bit(PWMF_ENABLED, &_pwm->flags))
+       if (!pwm_is_enabled(_pwm))
                return 0;
 
        if (duty_only && pwm->timer_on) {
index cabd7d8..d4de060 100644 (file)
@@ -112,7 +112,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
         * If the PWM channel is disabled, make sure to turn on the clock
         * before writing the register. Otherwise, keep it enabled.
         */
-       if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (!pwm_is_enabled(pwm)) {
                err = clk_prepare_enable(pc->clk);
                if (err < 0)
                        return err;
@@ -124,7 +124,7 @@ static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
        /*
         * If the PWM is not enabled, turn the clock off again to save power.
         */
-       if (!test_bit(PWMF_ENABLED, &pwm->flags))
+       if (!pwm_is_enabled(pwm))
                clk_disable_unprepare(pc->clk);
 
        return 0;
@@ -214,7 +214,7 @@ static int tegra_pwm_remove(struct platform_device *pdev)
        for (i = 0; i < NUM_PWM; i++) {
                struct pwm_device *pwm = &pc->chip.pwms[i];
 
-               if (!test_bit(PWMF_ENABLED, &pwm->flags))
+               if (!pwm_is_enabled(pwm))
                        if (clk_prepare_enable(pc->clk) < 0)
                                continue;
 
index e557bef..616af76 100644 (file)
@@ -97,7 +97,7 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 
        writew(reg_val, pc->mmio_base + ECCTL2);
 
-       if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (!pwm_is_enabled(pwm)) {
                /* Update active registers if not running */
                writel(duty_cycles, pc->mmio_base + CAP2);
                writel(period_cycles, pc->mmio_base + CAP1);
@@ -111,7 +111,7 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
                writel(period_cycles, pc->mmio_base + CAP3);
        }
 
-       if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (!pwm_is_enabled(pwm)) {
                reg_val = readw(pc->mmio_base + ECCTL2);
                /* Disable APWM mode to put APWM output Low */
                reg_val &= ~ECCTL2_APWM_MODE;
@@ -179,7 +179,7 @@ static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
-       if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (pwm_is_enabled(pwm)) {
                dev_warn(chip->dev, "Removing PWM device without disabling\n");
                pm_runtime_put_sync(chip->dev);
        }
@@ -306,7 +306,7 @@ static int ecap_pwm_suspend(struct device *dev)
        ecap_pwm_save_context(pc);
 
        /* Disable explicitly if PWM is running */
-       if (test_bit(PWMF_ENABLED, &pwm->flags))
+       if (pwm_is_enabled(pwm))
                pm_runtime_put_sync(dev);
 
        return 0;
@@ -318,7 +318,7 @@ static int ecap_pwm_resume(struct device *dev)
        struct pwm_device *pwm = pc->chip.pwms;
 
        /* Enable explicitly if PWM was running */
-       if (test_bit(PWMF_ENABLED, &pwm->flags))
+       if (pwm_is_enabled(pwm))
                pm_runtime_get_sync(dev);
 
        ecap_pwm_restore_context(pc);
index 694b3cf..6a41e66 100644 (file)
@@ -407,7 +407,7 @@ static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
        struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
 
-       if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+       if (pwm_is_enabled(pwm)) {
                dev_warn(chip->dev, "Removing PWM device without disabling\n");
                pm_runtime_put_sync(chip->dev);
        }
@@ -565,7 +565,7 @@ static int ehrpwm_pwm_suspend(struct device *dev)
        for (i = 0; i < pc->chip.npwm; i++) {
                struct pwm_device *pwm = &pc->chip.pwms[i];
 
-               if (!test_bit(PWMF_ENABLED, &pwm->flags))
+               if (!pwm_is_enabled(pwm))
                        continue;
 
                /* Disable explicitly if PWM is running */
@@ -582,7 +582,7 @@ static int ehrpwm_pwm_resume(struct device *dev)
        for (i = 0; i < pc->chip.npwm; i++) {
                struct pwm_device *pwm = &pc->chip.pwms[i];
 
-               if (!test_bit(PWMF_ENABLED, &pwm->flags))
+               if (!pwm_is_enabled(pwm))
                        continue;
 
                /* Enable explicitly if PWM was running */
index 4bd0c63..eecf21d 100644 (file)
@@ -97,7 +97,7 @@ static ssize_t pwm_enable_show(struct device *child,
                               char *buf)
 {
        const struct pwm_device *pwm = child_to_pwm_device(child);
-       int enabled = test_bit(PWMF_ENABLED, &pwm->flags);
+       int enabled = pwm_is_enabled(pwm);
 
        return sprintf(buf, "%d\n", enabled);
 }
index 36262d0..ec34f4d 100644 (file)
@@ -92,6 +92,11 @@ struct pwm_device {
        enum pwm_polarity       polarity;
 };
 
+static inline bool pwm_is_enabled(const struct pwm_device *pwm)
+{
+       return test_bit(PWMF_ENABLED, &pwm->flags);
+}
+
 static inline void pwm_set_period(struct pwm_device *pwm, unsigned int period)
 {
        if (pwm)