--- /dev/null
+## Sample initialization file for GNU nano.
+##
+## This file should not be in DOS or Mac format, and characters
+## specially interpreted by the shell should not be escaped here.
+##
+## To make sure an option is disabled, use "unset <option>".
+##
+## For the options that take parameters, the default value is given.
+## Other options are unset by default.
+##
+## Inside string parameters, quotes should not be escaped. The last
+## double quote on the line will be seen as the closing quote.
+
+## Make the 'nextword' function (Ctrl+Right) stop at word ends
+## instead of at beginnings.
+# set afterends
+
+## When soft line wrapping is enabled, make it wrap lines at blanks
+## (tabs and spaces) instead of always at the edge of the screen.
+# set atblanks
+
+## Automatically indent a newly created line to the same number of
+## tabs and/or spaces as the preceding line -- or as the next line
+## if the preceding line is the beginning of a paragraph.
+# set autoindent
+
+## Back up files to the current filename plus a tilde.
+# set backup
+
+## The directory to put unique backup files in.
+# set backupdir ""
+
+## Use bold text instead of reverse video text.
+# set boldtext
+
+## The characters treated as closing brackets when justifying paragraphs.
+## This may not include any blank characters. Only closing punctuation,
+## optionally followed by these closing brackets, can end sentences.
+# set brackets ""')>]}"
+
+## Automatically hard-wrap the current line when it becomes overlong.
+# set breaklonglines
+
+## Do case-sensitive searches by default.
+# set casesensitive
+
+## Constantly display the cursor position in the status bar. Note that
+## this overrides "quickblank".
+# set constantshow
+
+## Use cut-from-cursor-to-end-of-line by default.
+# set cutfromcursor
+
+## Do not use the line below the title bar, leaving it entirely blank.
+# set emptyline
+
+## Enable hard-wrapping and set the target width, both for automatic
+## line wrapping and for justifying paragraphs. If the value is 0 or
+## less, the wrapping point will be the screen width minus this number.
+# set fill -8
+
+## Remember the used search/replace strings for the next session.
+# set historylog
+
+## Scroll the buffer contents per half-screen instead of per line.
+# set jumpyscrolling
+
+## Display line numbers to the left of the text.
+set linenumbers
+
+## Enable vim-style lock-files. This is just to let a vim user know you
+## are editing a file [s]he is trying to edit and vice versa. There are
+## no plans to implement vim-style undo state in these files.
+# set locking
+
+## The opening and closing brackets that can be found by bracket
+## searches. They cannot contain blank characters. The former set must
+## come before the latter set, and both must be in the same order.
+# set matchbrackets "(<[{)>]}"
+
+## Enable mouse support, if available for your system. When enabled,
+## mouse clicks can be used to place the cursor, set the mark (with a
+## double click), and execute shortcuts. The mouse will work in the X
+## Window System, and on the console when gpm is running.
+set mouse
+
+## Switch on multiple file buffers (inserting a file will put it into
+## a separate buffer).
+# set multibuffer
+
+## Don't convert files from DOS/Mac format.
+# set noconvert
+
+## Don't display the helpful shortcut lists at the bottom of the screen.
+# set nohelp
+
+## Don't automatically add a newline when a file does not end with one.
+# set nonewlines
+
+## Don't pause between warnings at startup. Which means that only the
+## last one will be readable (when there are multiple ones).
+# set nopauses
+
+## Set operating directory. nano will not read or write files outside
+## this directory and its subdirectories. Also, the current directory
+## is changed to here, so any files are inserted from this dir. A blank
+## string means the operating-directory feature is turned off.
+# set operatingdir ""
+
+## Remember the cursor position in each file for the next editing session.
+# set positionlog
+
+## Preserve the XON and XOFF keys (^Q and ^S).
+# set preserve
+
+## The characters treated as closing punctuation when justifying
+## paragraphs. They cannot contain blank characters. Only closing
+## punctuation, optionally followed by closing brackets, can end
+## sentences.
+# set punct "!.?"
+
+## Do quick status-bar blanking. Status-bar messages will disappear after
+## 1 keystroke instead of 26. Note that "constantshow" overrides this.
+# set quickblank
+
+## The regular expression that matches quoting characters in email
+## or line-comment introducers in source code. The default is:
+# set quotestr "^([ ]*([!#%:;>|}]|//))+"
+
+## Try to work around a mismatching terminfo terminal description.
+# set rawsequences
+
+## Fix Backspace/Delete confusion problem.
+# set rebinddelete
+
+## Do regular-expression searches by default.
+## Regular expressions are of the extended type (ERE).
+# set regexp
+
+## Put the cursor on the highlighted item in the file browser, and show
+## the cursor in the help viewer; useful for people who use a braille
+## display and people with poor vision.
+# set showcursor
+
+## Make the Home key smarter. When Home is pressed anywhere but at the
+## very beginning of non-whitespace characters on a line, the cursor
+## will jump to that beginning (either forwards or backwards). If the
+## cursor is already at that position, it will jump to the true
+## beginning of the line.
+# set smarthome
+
+## Enable soft line wrapping (AKA full-line display).
+# set softwrap
+
+## Use this spelling checker instead of the internal one. This option
+## does not have a default value.
+# set speller "aspell -x -c"
+
+## Allow nano to be suspended.
+# set suspend
+
+## Use this tab size instead of the default; it must be greater than 0.
+set tabsize 4
+
+## Convert typed tabs to spaces.
+# set tabstospaces
+
+## Save automatically on exit; don't prompt.
+# set tempfile
+
+## Snip whitespace at the end of lines when justifying or hard-wrapping.
+# set trimblanks
+
+## Disallow file modification. Why would you want this in an rcfile? ;)
+# set view
+
+## The two single-column characters used to display the first characters
+## of tabs and spaces. 187 in ISO 8859-1 (0000BB in Unicode) and 183 in
+## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
+## The default when in a UTF-8 locale:
+# set whitespace "»·"
+## The default otherwise:
+# set whitespace ">."
+
+## Detect word boundaries differently by treating punctuation
+## characters as parts of words.
+# set wordbounds
+
+## The characters (besides alphanumeric ones) that should be considered
+## as parts of words. This option does not have a default value. When
+## set, it overrides option 'set wordbounds'.
+# set wordchars "<_>."
+
+## Let an unmodified Backspace or Delete erase the marked region (instead
+## of a single character, and without affecting the cutbuffer).
+# set zap
+
+## Paint the interface elements of nano. These are examples;
+## by default there are no colors, except for errorcolor.
+# set titlecolor brightwhite,blue
+# set statuscolor brightwhite,green
+# set errorcolor brightwhite,red
+# set selectedcolor brightwhite,magenta
+# set stripecolor ,yellow
+# set numbercolor cyan
+# set keycolor cyan
+# set functioncolor green
+## In root's .nanorc you might want to use:
+# set titlecolor brightwhite,magenta
+# set statuscolor brightwhite,magenta
+# set errorcolor brightwhite,red
+# set selectedcolor brightwhite,cyan
+# set stripecolor ,yellow
+# set numbercolor magenta
+# set keycolor brightmagenta
+# set functioncolor magenta
+
+
+## Setup of syntax coloring.
+##
+## Format:
+##
+## syntax "short description" ["filename regex" ...]
+##
+## The "none" syntax is reserved; specifying it on the command line is
+## the same as not having a syntax at all. The "default" syntax is
+## special: it takes no filename regexes, and applies to files that
+## don't match any other syntax's filename regexes.
+##
+## color foreground,background "regex" ["regex"...]
+## or
+## icolor foreground,background "regex" ["regex"...]
+##
+## "color" will do case-sensitive matches, while "icolor" will do
+## case-insensitive matches.
+##
+## Valid color names ares: white, black, normal, red, blue, green,
+## yellow, magenta, cyan. For foreground colors, you may use the
+## prefix "bright" to get a stronger highlight.
+##
+## All regexes (regular expressions) are of the extended type (ERE).
+##
+## To use multi-line regexes, use the start="regex" end="regex"
+## [start="regex" end="regex"...] format.
+##
+## If your system supports transparency, not specifying a background
+## color will use a transparent color. If you don't want this, be sure
+## to set the background color to black or white.
+##
+## If you wish, you may put your syntax definitions in separate files.
+## You can make use of such files as follows:
+##
+## include "/path/to/syntax_file.nanorc"
+##
+## Unless otherwise noted, the name of the syntax file (without the
+## ".nanorc" extension) should be the same as the "short description"
+## name inside that file. These names are kept fairly short to make
+## them easier to remember and faster to type using nano's -Y option.
+
+## To include all existing syntax definitions, you can do:
+# include "/usr/share/nano/*.nanorc"
+
+
+## If <Tab> should always produce four spaces when editing a Python file,
+## independent of the settings of 'tabsize' and 'tabstospaces':
+# extendsyntax python tabgives " "
+#
+## If <Tab> should always produce an actual TAB when editing a Makefile:
+# extendsyntax makefile tabgives " "
+
+
+## Key bindings.
+## See nanorc(5) (section REBINDING KEYS) for more details on this.
+
+## The <Ctrl+Delete> keystroke deletes the word to the right of the cursor.
+## On some terminals the <Ctrl+Backspace> keystroke produces ^H, which is
+## the ASCII character for backspace, so it is bound by default to the
+## backspace function. The <Backspace> key itself produces a different
+## keycode, which is hard-bound to the backspace function. So, if you
+## normally use <Backspace> for backspacing and not ^H, you can make
+## <Ctrl+Backspace> delete the word to the left of the cursor with:
+# bind ^H chopwordleft main
+
+## If you would like nano to have keybindings that are more "usual",
+## such as ^O for Open, ^F for Find, ^H for Help, and ^Q for Quit,
+## then uncomment these:
+#bind ^Q exit all
+#bind ^H help all
+#bind ^H exit help
+#bind ^F whereis all
+#bind ^G findnext all
+#bind ^B wherewas all
+#bind ^D findprevious all
+#bind ^R replace main
+#bind ^W writeout main
+#bind ^O insert main
+#unbind ^V all
+#unbind ^Y all
+#bind M-X flipnewbuffer all
+#bind ^X cut all
+#bind ^C copy all
+#bind ^V paste all
+#bind ^P curpos main
+#bind ^T gotoline main
+#bind ^T gotodir browser
+#bind ^Y speller main
+#unbind ^K all
+#unbind ^U all
+#bind M-R redo main
+#bind ^U undo main
+#bind ^E redo main
+#unbind M-J main
+#unbind M-T main
+#set multibuffer
--- /dev/null
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+# Yamada Hayao
+# Twitter: @Hayao0819
+# Email : hayao@fascone.net
+#
+# (c) 2019-2020 Fascode Network.
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir = /
+#DBPath = /var/lib/pacman/
+#CacheDir = /var/cache/pacman/pkg/
+#LogFile = /var/log/pacman.log
+#GPGDir = /etc/pacman.d/gnupg/
+#HookDir = /etc/pacman.d/hooks/
+HoldPkg = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg =
+#IgnoreGroup =
+
+#NoUpgrade =
+#NoExtract =
+
+# Misc options
+#UseSyslog
+Color
+TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here
+# - local/custom mirrors can be added here or in separate files
+# - repositories listed first will take precedence when packages
+# have identical names, regardless of version number
+# - URLs will have $repo replaced by the name of the current repo
+# - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+# [repo-name]
+# Server = ServerName
+# Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+# Alter Linux
+[alter-stable]
+Include = /etc/pacman.d/mirrorlist-alter
+
+[alter-kernel]
+Include = /etc/pacman.d/mirrorlist-alter
+
+#[alter-testing]
+#Include = /etc/pacman.d/mirrorlist-alter
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+# [hayao]
+# This is Yamada Hayao's personal repository.
+# It was used early but is now disabled.
+# Server = https://hayao0819.github.io/archlinux-repo/repo/$arch
+# SigLevel = Optional TrustAll
+
+# An example of a custom package repository. See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
OSDN Git Service
