tty: max310x: Fix external crystal register setup

commit 5d24f455c182d5116dd5db8e1dc501115ecc9c2c upstream.

The datasheet states:

  Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
  Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.

The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.

This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.

Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index be55fb6..0ac0c61 100644 (file)
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -571,7 +571,7 @@ static int max310x_set_ref_clk(struct max310x_port *s, unsigned long freq,
        }
 
        /* Configure clock source */
-       clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT;
+       clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0);
 
        /* Configure PLL */
        if (pllcfg) {