* mips/configure.in (mips64vr-elf, mips64vrel-elf): New config.

	* mips/configure: Regenerate.

diff --git a/libgloss/ChangeLog b/libgloss/ChangeLog
index 255cb08..e325c87 100644 (file)
--- a/libgloss/ChangeLog
+++ b/libgloss/ChangeLog
@@ -1,3 +1,8 @@
+2002-01-08  Richard Sandiford  <rsandifo@redhat.com
+
+       * mips/configure.in (mips64vr-elf, mips64vrel-elf): New config.
+       * mips/configure: Regenerate.
+
 2002-01-07  Chris Demetriou  <cgd@broadcom.com>
 
        * crt0.S: Check for definition of __mips64 rather than

diff --git a/libgloss/mips/configure b/libgloss/mips/configure
index 3789a08..83d3df7 100755 (executable)
--- a/libgloss/mips/configure
+++ b/libgloss/mips/configure
@@ -28,7 +28,6 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
-sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -143,7 +142,6 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -314,11 +312,6 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -484,16 +477,12 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
   fi
-else
-  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -594,7 +583,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:598: checking host system type" >&5
+echo "configure:587: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -615,7 +604,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:619: checking target system type" >&5
+echo "configure:608: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -633,7 +622,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:637: checking build system type" >&5
+echo "configure:626: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -687,7 +676,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:691: checking for a BSD compatible install" >&5
+echo "configure:680: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -751,7 +740,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:755: checking for $ac_word" >&5
+echo "configure:744: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -781,7 +770,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:785: checking for $ac_word" >&5
+echo "configure:774: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -830,7 +819,7 @@ fi
 fi
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:834: checking whether we are using GNU C" >&5
+echo "configure:823: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -839,7 +828,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:843: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:832: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -854,7 +843,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:858: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:847: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -890,7 +879,7 @@ LD=${LD-ld}
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:894: checking for $ac_word" >&5
+echo "configure:883: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -948,6 +937,11 @@ case "${target}" in
         script_list="idt pmon ddb ddb-kseg0 lsi idtecoff nullmon"
         bsp_list="libidt.a libpmon.a liblsi.a libnullmon.a"
        ;;
+  mips64vr-*-* | mips64vrel-*-*)
+       part_specific_obj="vr5xxx.o cma101.o"
+       script_list="ddb ddb-kseg0 nullmon"
+       bsp_list="libpmon.a libnullmon.a"
+       ;;
   *)
         part_specific_obj="vr4300.o cma101.o"
        part_specific_defines=
@@ -1160,7 +1154,7 @@ cat >> $CONFIG_STATUS <<\EOF
 
 # Split the substitutions into bite-sized pieces for seds with
 # small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
 ac_file=1 # Number of current file.
 ac_beg=1 # First line for current file.
 ac_end=$ac_max_sed_cmds # Line after last line for current file.

diff --git a/libgloss/mips/configure.in b/libgloss/mips/configure.in
index 820e7eb..ff2d098 100644 (file)
--- a/libgloss/mips/configure.in
+++ b/libgloss/mips/configure.in
@@ -112,6 +112,11 @@ case "${target}" in
         script_list="idt pmon ddb ddb-kseg0 lsi idtecoff nullmon"
         bsp_list="libidt.a libpmon.a liblsi.a libnullmon.a"
        ;;
+  mips64vr-*-* | mips64vrel-*-*)
+       part_specific_obj="vr5xxx.o cma101.o"
+       script_list="ddb ddb-kseg0 nullmon"
+       bsp_list="libpmon.a libnullmon.a"
+       ;;
   *)
         part_specific_obj="vr4300.o cma101.o"
        part_specific_defines=