ARM: dts: am57xx-beagle-x15: Switch UART mux pins

BeagleBoard-X15 pre-production change includes switching over to UART
pins that now allow for UART download capability. All original boards
should either have been returned for modifications or already modified
for the required change and maintaining compatibility for older boards
are no longer needed.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index be9b6a5..dd53ea5 100644 (file)
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -131,8 +131,8 @@
 
        uart3_pins_default: uart3_pins_default {
                pinctrl-single,pins = <
-                       0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
-                       0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+                       0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+                       0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
                >;
        };
 
@@ -479,7 +479,7 @@
 &uart3 {
        status = "okay";
        interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-                             <&dra7_pmx_core 0x248>;
+                             <&dra7_pmx_core 0x3f8>;
 
        pinctrl-names = "default";
        pinctrl-0 = <&uart3_pins_default>;