arm64: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E

[ Upstream commit dcabb06bf127b3e0d3fbc94a2b65dd56c2725851 ]

UniPhier LD20 and PXs3 boards have RTL8211E ethernet phy, and the phy have
the RX/TX delays of RGMII interface using pull-ups on the RXDLY and TXDLY
pins.

After the commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx
delay config"), the delays are working correctly, however, "rgmii" means
no delay and the phy doesn't work. So need to set the phy-mode to
"rgmii-id" to show that RX/TX delays are enabled.

Fixes: c73730ee4c9a ("arm64: dts: uniphier: add AVE ethernet node")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index caf1126..62429c4 100644 (file)
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -610,7 +610,7 @@
                        clocks = <&sys_clk 6>;
                        reset-names = "ether";
                        resets = <&sys_rst 6>;
-                       phy-mode = "rgmii";
+                       phy-mode = "rgmii-id";
                        local-mac-address = [00 00 00 00 00 00];
                        socionext,syscon-phy-mode = <&soc_glue 0>;
 

diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 2a4cf42..8fe9a57 100644 (file)
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -416,7 +416,7 @@
                        clocks = <&sys_clk 6>;
                        reset-names = "ether";
                        resets = <&sys_rst 6>;
-                       phy-mode = "rgmii";
+                       phy-mode = "rgmii-id";
                        local-mac-address = [00 00 00 00 00 00];
                        socionext,syscon-phy-mode = <&soc_glue 0>;
 
@@ -437,7 +437,7 @@
                        clocks = <&sys_clk 7>;
                        reset-names = "ether";
                        resets = <&sys_rst 7>;
-                       phy-mode = "rgmii";
+                       phy-mode = "rgmii-id";
                        local-mac-address = [00 00 00 00 00 00];
                        socionext,syscon-phy-mode = <&soc_glue 1>;