OSDN Git Service

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
authorLinus Torvalds <torvalds@linux-foundation.org>
Tue, 26 Jun 2012 18:23:41 +0000 (11:23 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 26 Jun 2012 18:23:41 +0000 (11:23 -0700)
Pull HID fixes from Jiri Kosina:
 "The most important one is a purification of Kconfig for CONFIG_HID;
  the inclusion of HID groups and autoloading didn't leave the Kconfig
  in a really consistent state.  Henrik's patch fixes that.  In addition
  to that, there are two small fixes for logitech and magicmouse
  drivers."

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Fix the generic Kconfig options
  HID: magicmouse: Correct report range of major / minor axes
  HID: logitech: don't use stack based dj_report structures

drivers/hid/Kconfig
drivers/hid/hid-logitech-dj.c
drivers/hid/hid-magicmouse.c
drivers/hid/usbhid/Kconfig
net/bluetooth/hidp/Kconfig

index 034c80a..bef04c1 100644 (file)
@@ -1,20 +1,11 @@
 #
 # HID driver configuration
 #
-menuconfig HID_SUPPORT
-       bool "HID Devices"
-       depends on INPUT
-       default y
-       ---help---
-         Say Y here to get to see options for various computer-human interface
-         device drivers. This option alone does not add any kernel code.
-
-         If you say N, all options in this submenu will be skipped and disabled.
-
-if HID_SUPPORT
+menu "HID support"
+     depends on INPUT
 
 config HID
-       tristate "Generic HID support"
+       tristate "HID bus support"
        depends on INPUT
        default y
        ---help---
@@ -23,14 +14,17 @@ config HID
          most commonly used to refer to the USB-HID specification, but other
          devices (such as, but not strictly limited to, Bluetooth) are
          designed using HID specification (this involves certain keyboards,
-         mice, tablets, etc). This option compiles into kernel the generic
-         HID layer code (parser, usages, etc.), which can then be used by
-         transport-specific HID implementation (like USB or Bluetooth).
+         mice, tablets, etc). This option adds the HID bus to the kernel,
+         together with generic HID layer code. The HID devices are added and
+         removed from the HID bus by the transport-layer drivers, such as
+         usbhid (USB_HID) and hidp (BT_HIDP).
 
          For docs and specs, see http://www.usb.org/developers/hidpage/
 
          If unsure, say Y.
 
+if HID
+
 config HID_BATTERY_STRENGTH
        bool "Battery level reporting for HID devices"
        depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
@@ -59,23 +53,22 @@ config HIDRAW
 
        If unsure, say Y.
 
-source "drivers/hid/usbhid/Kconfig"
-
-menu "Special HID drivers"
-       depends on HID
-
 config HID_GENERIC
        tristate "Generic HID driver"
        depends on HID
-       default y
+       default HID
        ---help---
-       Support for generic HID devices.
+       Support for generic devices on the HID bus. This includes most
+       keyboards and mice, joysticks, tablets and digitizers.
 
        To compile this driver as a module, choose M here: the module
        will be called hid-generic.
 
        If unsure, say Y.
 
+menu "Special HID drivers"
+       depends on HID
+
 config HID_A4TECH
        tristate "A4 tech mice" if EXPERT
        depends on USB_HID
@@ -662,4 +655,8 @@ config HID_ZYDACRON
 
 endmenu
 
-endif # HID_SUPPORT
+endif # HID
+
+source "drivers/hid/usbhid/Kconfig"
+
+endmenu
index 5e8a7ed..0f9c146 100644 (file)
@@ -436,27 +436,37 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
 
 static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
 {
-       struct dj_report dj_report;
+       struct dj_report *dj_report;
+       int retval;
 
-       memset(&dj_report, 0, sizeof(dj_report));
-       dj_report.report_id = REPORT_ID_DJ_SHORT;
-       dj_report.device_index = 0xFF;
-       dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
-       return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+       dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+       if (!dj_report)
+               return -ENOMEM;
+       dj_report->report_id = REPORT_ID_DJ_SHORT;
+       dj_report->device_index = 0xFF;
+       dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+       retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+       kfree(dj_report);
+       return retval;
 }
 
 static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
                                          unsigned timeout)
 {
-       struct dj_report dj_report;
+       struct dj_report *dj_report;
+       int retval;
 
-       memset(&dj_report, 0, sizeof(dj_report));
-       dj_report.report_id = REPORT_ID_DJ_SHORT;
-       dj_report.device_index = 0xFF;
-       dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
-       dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
-       dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
-       return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+       dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+       if (!dj_report)
+               return -ENOMEM;
+       dj_report->report_id = REPORT_ID_DJ_SHORT;
+       dj_report->device_index = 0xFF;
+       dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
+       dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
+       dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+       retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+       kfree(dj_report);
+       return retval;
 }
 
 
index 7cf3ffe..40ac665 100644 (file)
@@ -426,8 +426,10 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
                __set_bit(EV_ABS, input->evbit);
 
                input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
-               input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
-               input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+               input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2,
+                                    4, 0);
+               input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2,
+                                    4, 0);
                input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
 
                /* Note: Touch Y position from the device is inverted relative
index 0f20fd1..0108c59 100644 (file)
@@ -1,13 +1,13 @@
-comment "USB Input Devices"
+menu "USB HID support"
        depends on USB
 
 config USB_HID
-       tristate "USB Human Interface Device (full HID) support"
+       tristate "USB HID transport layer"
        default y
        depends on USB && INPUT
        select HID
        ---help---
-         Say Y here if you want full HID support to connect USB keyboards,
+         Say Y here if you want to connect USB keyboards,
          mice, joysticks, graphic tablets, or any other HID based devices
          to your computer via USB, as well as Uninterruptible Power Supply
          (UPS) and monitor control devices.
@@ -81,4 +81,4 @@ config USB_MOUSE
 
 endmenu
 
-
+endmenu
index 4deaca7..9332bc7 100644 (file)
@@ -1,6 +1,6 @@
 config BT_HIDP
        tristate "HIDP protocol support"
-       depends on BT && INPUT && HID_SUPPORT
+       depends on BT && INPUT
        select HID
        help
          HIDP (Human Interface Device Protocol) is a transport layer