scsi: ufs: Add driver for TI wrapper for Cadence UFS IP

TI's J721e SoC has a Cadence UFS IP with a TI specific wrapper. This is a
minimal driver to configure the wrapper. It releases the UFS slave device
out of reset and sets up registers to indicate PHY reference clock input
frequency before probing child Cadence UFS driver.

Link: https://lore.kernel.org/r/20191108164857.11466-3-vigneshr@ti.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 0b845ab..d14c224 100644 (file)
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -132,6 +132,16 @@ config SCSI_UFS_HISI
          Select this if you have UFS controller on Hisilicon chipset.
          If unsure, say N.
 
+config SCSI_UFS_TI_J721E
+       tristate "TI glue layer for Cadence UFS Controller"
+       depends on OF && HAS_IOMEM && (ARCH_K3 || COMPILE_TEST)
+       help
+         This selects driver for TI glue layer for Cadence UFS Host
+         Controller IP.
+
+         Selects this if you have TI platform with UFS controller.
+         If unsure, say N.
+
 config SCSI_UFS_BSG
        bool "Universal Flash Storage BSG device node"
        depends on SCSI_UFSHCD

diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 2a90979..94c6c5d 100644 (file)
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
 obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
 obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
 obj-$(CONFIG_SCSI_UFS_MEDIATEK) += ufs-mediatek.o
+obj-$(CONFIG_SCSI_UFS_TI_J721E) += ti-j721e-ufs.o

diff --git a/drivers/scsi/ufs/ti-j721e-ufs.c b/drivers/scsi/ufs/ti-j721e-ufs.c
new file mode 100644 (file)
index 0000000..5216d22
--- /dev/null
+++ b/drivers/scsi/ufs/ti-j721e-ufs.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+//
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define TI_UFS_SS_CTRL         0x4
+#define TI_UFS_SS_RST_N_PCS    BIT(0)
+#define TI_UFS_SS_CLK_26MHZ    BIT(4)
+
+static int ti_j721e_ufs_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       unsigned long clk_rate;
+       void __iomem *regbase;
+       struct clk *clk;
+       u32 reg = 0;
+       int ret;
+
+       regbase = devm_platform_ioremap_resource(pdev, 0);
+       if (IS_ERR(regbase))
+               return PTR_ERR(regbase);
+
+       pm_runtime_enable(dev);
+       ret = pm_runtime_get_sync(dev);
+       if (ret < 0) {
+               pm_runtime_put_noidle(dev);
+               return ret;
+       }
+
+       /* Select MPHY refclk frequency */
+       clk = devm_clk_get(dev, NULL);
+       if (IS_ERR(clk)) {
+               dev_err(dev, "Cannot claim MPHY clock.\n");
+               return PTR_ERR(clk);
+       }
+       clk_rate = clk_get_rate(clk);
+       if (clk_rate == 26000000)
+               reg |= TI_UFS_SS_CLK_26MHZ;
+       devm_clk_put(dev, clk);
+
+       /*  Take UFS slave device out of reset */
+       reg |= TI_UFS_SS_RST_N_PCS;
+       writel(reg, regbase + TI_UFS_SS_CTRL);
+
+       ret = of_platform_populate(pdev->dev.of_node, NULL, NULL,
+                                  dev);
+       if (ret) {
+               dev_err(dev, "failed to populate child nodes %d\n", ret);
+               pm_runtime_put_sync(dev);
+       }
+
+       return ret;
+}
+
+static int ti_j721e_ufs_remove(struct platform_device *pdev)
+{
+       of_platform_depopulate(&pdev->dev);
+       pm_runtime_put_sync(&pdev->dev);
+
+       return 0;
+}
+
+static const struct of_device_id ti_j721e_ufs_of_match[] = {
+       {
+               .compatible = "ti,j721e-ufs",
+       },
+       { },
+};
+
+static struct platform_driver ti_j721e_ufs_driver = {
+       .probe  = ti_j721e_ufs_probe,
+       .remove = ti_j721e_ufs_remove,
+       .driver = {
+               .name   = "ti-j721e-ufs",
+               .of_match_table = ti_j721e_ufs_of_match,
+       },
+};
+module_platform_driver(ti_j721e_ufs_driver);
+
+MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>");
+MODULE_DESCRIPTION("TI UFS host controller glue driver");
+MODULE_LICENSE("GPL v2");