"connected" -> "disconnected"
Disconnected from the remote device
-Headset hierarchy
-=================
-
-Service org.bluez
-Interface org.bluez.Headset
-Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
-
-Methods void Connect()
-
- Connect to the HSP/HFP service on the remote device.
-
- void Disconnect()
-
- Disconnect from the HSP/HFP service on the remote
- device.
-
- void IndicateCall()
-
- Indicate an incoming call on the headset
- connected to the stream. Will continue to
- ring the headset about every 3 seconds.
-
- void CancelCall()
-
- Cancel the incoming call indication.
-
- void Play() {deprecated}
-
- Open the audio connection to the headset.
-
- void Stop()
-
- Close the audio connection.
-
- dict GetProperties()
-
- Returns all properties for the interface. See the
- properties section for available properties.
-
- Possible Errors: org.bluez.Error.InvalidArguments
-
- void SetProperty(string name, variant value)
-
- Changes the value of the specified property. Only
- properties that are listed as read-write are changeable.
- On success this will emit a PropertyChanged signal.
-
- Possible Errors: org.bluez.Error.DoesNotExist
- org.bluez.Error.InvalidArguments
-
-Signals void AnswerRequested()
-
- Sent when the answer button is pressed on the headset
-
- void Connected() {deprecated}
-
- Sent when the device has been connected to.
-
- void Disconnected() {deprecated}
-
- Sent when the device has been disconnected from.
-
- void Stopped() {deprecated}
-
- Sent when the audio connection is closed
-
- void Playing() {deprecated}
-
- Sent when the audio connection is opened
-
- void SpeakerGainChanged(uint16 gain) {deprecated}
-
- The speaker gain changed.
-
- void MicrophoneGainChanged(uint16 gain) {deprecated}
-
- The microphone gain changed.
-
- PropertyChanged(string name, variant value)
-
- This signal indicates a changed value of the given
- property.
-
-properties string State [readonly]
-
- Possible values: "disconnected", "connecting",
- "connected", "playing"
-
- "disconnected" -> "connecting"
- Either an incoming or outgoing connection
- attempt ongoing.
-
- "connecting" -> "disconnected"
- Connection attempt failed
-
- "connecting" -> "connected"
- Successfully connected
-
- "connected" -> "playing"
- SCO audio connection successfully opened
-
- "playing" -> "connected"
- SCO audio connection closed
-
- "connected" -> "disconnected"
- "playing" -> "disconnected"
- Disconnected from the remote device
-
- boolean Connected [readonly]
-
- Indicates if there is a active connection to the
- HSP/HFP connection on the remote device.
-
- boolean Playing [readonly]
-
- Indicates if an audio connection to the headset
- is active.
-
- uint16 SpeakerGain [readwrite]
-
- The speaker gain when available.
-
- uint16 MicrophoneGain [readwrite]
-
- The speaker gain when available.
-
AudioSink hierarchy
===================
"connected" -> "disconnected"
"playing" -> "disconnected"
Disconnected from the remote device
-
-
-HeadsetGateway hierarchy
-========================
-
-Service org.bluez
-Interface org.bluez.HeadsetGateway
-Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
-
-This interface is available for remote devices which can function in the Audio
-Gateway role of the HFP profiles.
-
-Methods void Connect()
-
- Connect to the AG service on the remote device.
-
- void Disconnect()
-
- Disconnect from the AG service on the remote device
-
- void AnswerCall()
-
- It has to called only after Ring signal received.
-
- void TerminateCall()
-
- Terminate call which is running or reject an incoming
- call. This has nothing with any 3-way situation incl.
- RaH. Just plain old PDH.
-
- void Call(string number)
-
- Dial a number 'number'. No number processing is done
- thus if AG would reject to dial it don't blame me :)
-
- string GetOperatorName()
-
- Find out the name of the currently selected network
- operator by AG.
-
- void SendDTMF(string digits)
-
- Will send each digit in the 'digits' sequentially. Would
- send nothing if there is non-dtmf digit.
-
- string GetSubscriberNumber()
-
- Get the voicecall subscriber number of AG
-
- dict GetProperties()
-
- Returns all properties for the interface. See the
- properties section for available properties.
-
-Signals void Ring(string number)
-
- Someone's calling from 'number'.
- Caller number is provided as received from AG.
-
- void CallTerminated()
-
- Call failed to set up. It means that we tried to call
- someone or someone tried to call us but call was not
- accepted.
-
- void CallStarted()
-
- Call set up successfully.
-
- void CallEnded()
-
- Call was started and now ended. In contrast with
- CallTerminated where call didn't started
-
- PropertyChanged(string name, variant value)
-
- This signal indicates a changed value of the given
- property.
-
-properties boolean Connected [readonly]
-
- Indicates if there is an active connection to the
- AG service on the remote device.
-
- uint16 RegistrationStatus [readonly]
-
- Service availability indicator of AG, where:
- 0 implies no service. No Home/Roam network available.
- 1 implies presence of service. Home/Roam network
- available.
-
- uint16 SignalStrength [readonly]
-
- Signal strength indicator of AG, the value ranges from
- 0 to 5.
-
- uint16 RoamingStatus [readonly]
-
- Roaming status indicator of AG, where:
- 0 means roaming is not active
- 1 means a roaming is active
-
- uint16 BatteryCharge [readonly]
-
- Battery Charge indicator of AG, the value ranges from
- 0 to 5.
-
- uint16 SpeakerGain [readonly]
-
- The speaker gain when available.
-
- uint16 MicrophoneGain [readonly]
-
- The speaker gain when available.
OSDN Git Service
