drm: Unexport primary plane helpers

Well except the destroy helper, which isn't really a primary helper
but generally useful, if mislabelled.

v2: Keep some of the nice comments about the limitations of the
primarmy plane helpers, and put them into the kerneldoc for
drm_crtc_init() (Sam).

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005094732.31353-1-daniel.vetter@ffwll.ch

diff --git a/drivers/gpu/drm/drm_modeset_helper.c b/drivers/gpu/drm/drm_modeset_helper.c
index f1c24ab..9150fa3 100644 (file)
--- a/drivers/gpu/drm/drm_modeset_helper.c
+++ b/drivers/gpu/drm/drm_modeset_helper.c
@@ -146,6 +146,21 @@ static struct drm_plane *create_primary_plane(struct drm_device *dev)
  * Initialize a CRTC object with a default helper-provided primary plane and no
  * cursor plane.
  *
+ * Note that we make some assumptions about hardware limitations that may not be
+ * true for all hardware:
+ *
+ * 1. Primary plane cannot be repositioned.
+ * 2. Primary plane cannot be scaled.
+ * 3. Primary plane must cover the entire CRTC.
+ * 4. Subpixel positioning is not supported.
+ * 5. The primary plane must always be on if the CRTC is enabled.
+ *
+ * This is purely a backwards compatibility helper for old drivers. Drivers
+ * should instead implement their own primary plane. Atomic drivers must do so.
+ * Drivers with the above hardware restriction can look into using &struct
+ * drm_simple_display_pipe, which encapsulates the above limitations into a nice
+ * interface.
+ *
  * Returns:
  * Zero on success, error code on failure.
  */

diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
index 9652862..06c761d 100644 (file)
--- a/drivers/gpu/drm/drm_plane_helper.c
+++ b/drivers/gpu/drm/drm_plane_helper.c
@@ -42,11 +42,8 @@
  * primary plane support on top of the normal CRTC configuration interface.
  * Since the legacy &drm_mode_config_funcs.set_config interface ties the primary
  * plane together with the CRTC state this does not allow userspace to disable
- * the primary plane itself.  To avoid too much duplicated code use
- * drm_plane_helper_check_update() which can be used to enforce the same
- * restrictions as primary planes had thus. The default primary plane only
- * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached
- * framebuffer.
+ * the primary plane itself. The default primary plane only expose XRBG8888 and
+ * ARGB8888 as valid pixel formats for the attached framebuffer.
  *
  * Drivers are highly recommended to implement proper support for primary
  * planes, and newly merged drivers must not rely upon these transitional
@@ -175,50 +172,13 @@ int drm_plane_helper_check_update(struct drm_plane *plane,
 }
 EXPORT_SYMBOL(drm_plane_helper_check_update);
 
-/**
- * drm_primary_helper_update() - Helper for primary plane update
- * @plane: plane object to update
- * @crtc: owning CRTC of owning plane
- * @fb: framebuffer to flip onto plane
- * @crtc_x: x offset of primary plane on crtc
- * @crtc_y: y offset of primary plane on crtc
- * @crtc_w: width of primary plane rectangle on crtc
- * @crtc_h: height of primary plane rectangle on crtc
- * @src_x: x offset of @fb for panning
- * @src_y: y offset of @fb for panning
- * @src_w: width of source rectangle in @fb
- * @src_h: height of source rectangle in @fb
- * @ctx: lock acquire context, not used here
- *
- * Provides a default plane update handler for primary planes.  This is handler
- * is called in response to a userspace SetPlane operation on the plane with a
- * non-NULL framebuffer.  We call the driver's modeset handler to update the
- * framebuffer.
- *
- * SetPlane() on a primary plane of a disabled CRTC is not supported, and will
- * return an error.
- *
- * Note that we make some assumptions about hardware limitations that may not be
- * true for all hardware --
- *
- * 1. Primary plane cannot be repositioned.
- * 2. Primary plane cannot be scaled.
- * 3. Primary plane must cover the entire CRTC.
- * 4. Subpixel positioning is not supported.
- *
- * Drivers for hardware that don't have these restrictions can provide their
- * own implementation rather than using this helper.
- *
- * RETURNS:
- * Zero on success, error code on failure
- */
-int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
-                             struct drm_framebuffer *fb,
-                             int crtc_x, int crtc_y,
-                             unsigned int crtc_w, unsigned int crtc_h,
-                             uint32_t src_x, uint32_t src_y,
-                             uint32_t src_w, uint32_t src_h,
-                             struct drm_modeset_acquire_ctx *ctx)
+static int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
+                                    struct drm_framebuffer *fb,
+                                    int crtc_x, int crtc_y,
+                                    unsigned int crtc_w, unsigned int crtc_h,
+                                    uint32_t src_x, uint32_t src_y,
+                                    uint32_t src_w, uint32_t src_h,
+                                    struct drm_modeset_acquire_ctx *ctx)
 {
        struct drm_mode_set set = {
                .crtc = crtc,
@@ -285,35 +245,12 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
        kfree(connector_list);
        return ret;
 }
-EXPORT_SYMBOL(drm_primary_helper_update);
 
-/**
- * drm_primary_helper_disable() - Helper for primary plane disable
- * @plane: plane to disable
- * @ctx: lock acquire context, not used here
- *
- * Provides a default plane disable handler for primary planes.  This is handler
- * is called in response to a userspace SetPlane operation on the plane with a
- * NULL framebuffer parameter.  It unconditionally fails the disable call with
- * -EINVAL the only way to disable the primary plane without driver support is
- * to disable the entire CRTC. Which does not match the plane
- * &drm_plane_funcs.disable_plane hook.
- *
- * Note that some hardware may be able to disable the primary plane without
- * disabling the whole CRTC.  Drivers for such hardware should provide their
- * own disable handler that disables just the primary plane (and they'll likely
- * need to provide their own update handler as well to properly re-enable a
- * disabled primary plane).
- *
- * RETURNS:
- * Unconditionally returns -EINVAL.
- */
-int drm_primary_helper_disable(struct drm_plane *plane,
-                              struct drm_modeset_acquire_ctx *ctx)
+static int drm_primary_helper_disable(struct drm_plane *plane,
+                                     struct drm_modeset_acquire_ctx *ctx)
 {
        return -EINVAL;
 }
-EXPORT_SYMBOL(drm_primary_helper_disable);
 
 /**
  * drm_primary_helper_destroy() - Helper for primary plane destruction

diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
index 1999781..fb086aa 100644 (file)
--- a/include/drm/drm_plane_helper.h
+++ b/include/drm/drm_plane_helper.h
@@ -49,16 +49,6 @@ int drm_plane_helper_check_update(struct drm_plane *plane,
                                  bool can_position,
                                  bool can_update_disabled,
                                  bool *visible);
-int drm_primary_helper_update(struct drm_plane *plane,
-                             struct drm_crtc *crtc,
-                             struct drm_framebuffer *fb,
-                             int crtc_x, int crtc_y,
-                             unsigned int crtc_w, unsigned int crtc_h,
-                             uint32_t src_x, uint32_t src_y,
-                             uint32_t src_w, uint32_t src_h,
-                             struct drm_modeset_acquire_ctx *ctx);
-int drm_primary_helper_disable(struct drm_plane *plane,
-                              struct drm_modeset_acquire_ctx *ctx);
 void drm_primary_helper_destroy(struct drm_plane *plane);
 extern const struct drm_plane_funcs drm_primary_helper_funcs;