i2c: aspeed: Add newline characters into message printings.

There are some log printing without a newline character. This
patch adds the missing newline characters.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 60e4d0e..e3007c1 100644 (file)
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -407,7 +407,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
         */
        ret = aspeed_i2c_is_irq_error(irq_status);
        if (ret < 0) {
-               dev_dbg(bus->dev, "received error interrupt: 0x%08x",
+               dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
                        irq_status);
                bus->cmd_err = ret;
                bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
@@ -416,7 +416,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
 
        /* We are in an invalid state; reset bus to a known state. */
        if (!bus->msgs) {
-               dev_err(bus->dev, "bus in unknown state");
+               dev_err(bus->dev, "bus in unknown state\n");
                bus->cmd_err = -EIO;
                if (bus->master_state != ASPEED_I2C_MASTER_STOP)
                        aspeed_i2c_do_stop(bus);
@@ -431,7 +431,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
         */
        if (bus->master_state == ASPEED_I2C_MASTER_START) {
                if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
-                       pr_devel("no slave present at %02x", msg->addr);
+                       pr_devel("no slave present at %02x\n", msg->addr);
                        status_ack |= ASPEED_I2CD_INTR_TX_NAK;
                        bus->cmd_err = -ENXIO;
                        aspeed_i2c_do_stop(bus);
@@ -451,11 +451,11 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
        switch (bus->master_state) {
        case ASPEED_I2C_MASTER_TX:
                if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
-                       dev_dbg(bus->dev, "slave NACKed TX");
+                       dev_dbg(bus->dev, "slave NACKed TX\n");
                        status_ack |= ASPEED_I2CD_INTR_TX_NAK;
                        goto error_and_stop;
                } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
-                       dev_err(bus->dev, "slave failed to ACK TX");
+                       dev_err(bus->dev, "slave failed to ACK TX\n");
                        goto error_and_stop;
                }
                status_ack |= ASPEED_I2CD_INTR_TX_ACK;
@@ -478,7 +478,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
                /* fallthrough intended */
        case ASPEED_I2C_MASTER_RX:
                if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
-                       dev_err(bus->dev, "master failed to RX");
+                       dev_err(bus->dev, "master failed to RX\n");
                        goto error_and_stop;
                }
                status_ack |= ASPEED_I2CD_INTR_RX_DONE;
@@ -509,7 +509,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
                goto out_no_complete;
        case ASPEED_I2C_MASTER_STOP:
                if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
-                       dev_err(bus->dev, "master failed to STOP");
+                       dev_err(bus->dev, "master failed to STOP\n");
                        bus->cmd_err = -EIO;
                        /* Do not STOP as we have already tried. */
                } else {
@@ -520,7 +520,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
                goto out_complete;
        case ASPEED_I2C_MASTER_INACTIVE:
                dev_err(bus->dev,
-                       "master received interrupt 0x%08x, but is inactive",
+                       "master received interrupt 0x%08x, but is inactive\n",
                        irq_status);
                bus->cmd_err = -EIO;
                /* Do not STOP as we should be inactive. */
@@ -851,7 +851,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
        bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
        if (IS_ERR(bus->rst)) {
                dev_err(&pdev->dev,
-                       "missing or invalid reset controller device tree entry");
+                       "missing or invalid reset controller device tree entry\n");
                return PTR_ERR(bus->rst);
        }
        reset_control_deassert(bus->rst);