dt-bindings: watchdog: drop duplicated GPIO watchdog bindings

Two conversions to DT schema of GPIO watchdog binding happened and came
through different trees.  Merge them into one:
1. Combine maintainers,
2. Use more descriptive property descriptions and constraints from
   gpio-wdt.yaml,
3. Switch to unevaluatedProperties:false, to allow generic watchdog
   properties.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230415095112.51257-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml b/Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml
deleted file mode 100644 (file)
index 155dc79..0000000
--- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.yaml
+++ /dev/null
@@ -1,55 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/watchdog/gpio-wdt.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: GPIO controlled watchdog
-
-maintainers:
-  - Robert Marko <robert.marko@sartura.hr>
-
-properties:
-  compatible:
-    const: linux,wdt-gpio
-
-  gpios:
-    maxItems: 1
-    description: GPIO connected to the WDT reset pin
-
-  hw_algo:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: Algorithm used by the driver
-    oneOf:
-      - description:
-          Either a high-to-low or a low-to-high transition clears the WDT counter.
-          The watchdog timer is disabled when GPIO is left floating or connected
-          to a three-state buffer.
-        const: toggle
-      - description:
-          Low or high level starts counting WDT timeout, the opposite level
-          disables the WDT.
-          Active level is determined by the GPIO flags.
-        const: level
-
-  hw_margin_ms:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: Maximum time to reset watchdog circuit (in milliseconds)
-    minimum: 2
-    maximum: 65535
-
-  always-running:
-    type: boolean
-    description:
-      If the watchdog timer cannot be disabled, add this flag to have the driver
-      keep toggling the signal without a client.
-      It will only cease to toggle the signal when the device is open and the
-      timeout elapsed.
-
-required:
-  - compatible
-  - gpios
-  - hw_algo
-  - hw_margin_ms
-
-unevaluatedProperties: false

diff --git a/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml b/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml
index 50af79a..499f1b7 100644 (file)
--- a/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml
+++ b/Documentation/devicetree/bindings/watchdog/linux,wdt-gpio.yaml
@@ -8,6 +8,7 @@ title: GPIO-controlled Watchdog
 
 maintainers:
   - Guenter Roeck <linux@roeck-us.net>
+  - Robert Marko <robert.marko@sartura.hr>
 
 properties:
   compatible:
@@ -19,11 +20,23 @@ properties:
 
   hw_algo:
     description: The algorithm used by the driver.
-    enum: [ level, toggle ]
+    oneOf:
+      - description:
+          Either a high-to-low or a low-to-high transition clears the WDT counter.
+          The watchdog timer is disabled when GPIO is left floating or connected
+          to a three-state buffer.
+        const: toggle
+      - description:
+          Low or high level starts counting WDT timeout, the opposite level
+          disables the WDT.
+          Active level is determined by the GPIO flags.
+        const: level
 
   hw_margin_ms:
     description: Maximum time to reset watchdog circuit (milliseconds).
     $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2
+    maximum: 65535
 
   always-running:
     type: boolean
@@ -42,7 +55,7 @@ required:
 allOf:
   - $ref: watchdog.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |