continue;
Value *Ptr = getPointerOperand(&I);
- // We don't check wrapping here because we don't know yet if Ptr will be
- // part of a full group or a group with gaps. Checking wrapping for all
- // pointers (even those that end up in groups with no gaps) will be overly
- // conservative. For full groups, wrapping should be ok since if we would
- // wrap around the address space we would do a memory access at nullptr
- // even without the transformation. The wrapping checks are therefore
- // deferred until after we've formed the interleaved groups.
- int64_t Stride = getPtrStride(PSE, Ptr, TheLoop, Strides,
- /*Assume=*/true, /*ShouldCheckWrap=*/false);
+ int64_t Stride = getPtrStride(PSE, Ptr, TheLoop, Strides);
const SCEV *Scev = replaceSymbolicStrideSCEV(PSE, Strides, Ptr);
PointerType *PtrTy = dyn_cast<PointerType>(Ptr->getType());
if (Group->getNumMembers() != Group->getFactor())
releaseGroup(Group);
- // Remove interleaved groups with gaps (currently only loads) whose memory
- // accesses may wrap around. We have to revisit the getPtrStride analysis,
- // this time with ShouldCheckWrap=true, since collectConstStrideAccesses does
- // not check wrapping (see documentation there).
- // FORNOW we use Assume=false;
- // TODO: Change to Assume=true but making sure we don't exceed the threshold
- // of runtime SCEV assumptions checks (thereby potentially failing to
- // vectorize altogether).
- // Additional optional optimizations:
- // TODO: If we are peeling the loop and we know that the first pointer doesn't
- // wrap then we can deduce that all pointers in the group don't wrap.
- // This means that we can forcefully peel the loop in order to only have to
- // check the first pointer for no-wrap. When we'll change to use Assume=true
- // we'll only need at most one runtime check per interleaved group.
- //
- for (InterleaveGroup *Group : LoadGroups) {
-
- // Case 1: A full group. Can Skip the checks; For full groups, if the wide
- // load would wrap around the address space we would do a memory access at
- // nullptr even without the transformation.
- if (Group->getNumMembers() == Group->getFactor())
- continue;
-
- // Case 2: If first and last members of the group don't wrap this implies
- // that all the pointers in the group don't wrap.
- // So we check only group member 0 (which is always guaranteed to exist),
- // and group member Factor-1 (if it doesn't exist we can just ignore it
- // since we know that in this case we will always peel the loop, in which
- // case we only need to check the first member).
- Value *FirstMemberPtr = getPointerOperand(Group->getMember(0));
- if (!getPtrStride(PSE, FirstMemberPtr, TheLoop, Strides, /*Assume=*/false,
- /*ShouldCheckWrap=*/true)) {
- DEBUG(dbgs() << "LV: Invalidate candidate interleaved group due to "
- "potential pointer wrapping.\n");
- releaseGroup(Group);
- continue;
- }
-
- if (Instruction *LastMember = Group->getMember(Group->getFactor() - 1)) {
- Value *LastMemberPtr = getPointerOperand(LastMember);
- if (!getPtrStride(PSE, LastMemberPtr, TheLoop, Strides, /*Assume=*/false,
- /*ShouldCheckWrap=*/true)) {
- DEBUG(dbgs() << "LV: Invalidate candidate interleaved group due to "
- "potential pointer wrapping.\n");
- releaseGroup(Group);
- continue;
- }
- }
- }
-
// If there is a non-reversed interleaved load group with gaps, we will need
// to execute at least one scalar epilogue iteration. This will ensure that
// we don't speculatively access memory out-of-bounds. Note that we only need
-; RUN: opt -loop-vectorize -mtriple=arm64-apple-ios -S -mcpu=cyclone -enable-interleaved-mem-accesses=false < %s | FileCheck %s
+; RUN: opt -loop-vectorize -mtriple=arm64-apple-ios -S -mcpu=cyclone < %s | FileCheck %s
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n32:64-S128"
@kernel = global [512 x float] zeroinitializer, align 16
-; RUN: opt -loop-vectorize -mtriple=thumbv7s-apple-ios6.0.0 -S -enable-interleaved-mem-accesses=false < %s | FileCheck %s
+; RUN: opt -loop-vectorize -mtriple=thumbv7s-apple-ios6.0.0 -S < %s | FileCheck %s
target datalayout = "e-p:32:32:32-i1:8:32-i8:8:32-i16:16:32-i32:32:32-i64:32:64-f32:32:32-f64:32:64-v64:32:64-v128:32:128-a0:0:32-n32-S32"
-; RUN: opt -loop-vectorize -mtriple=x86_64-apple-macosx -S -mcpu=corei7-avx -enable-interleaved-mem-accesses=false < %s | FileCheck %s
+; RUN: opt -loop-vectorize -mtriple=x86_64-apple-macosx -S -mcpu=corei7-avx < %s | FileCheck %s
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
@kernel = global [512 x float] zeroinitializer, align 16
+++ /dev/null
-; RUN: opt -S -loop-vectorize -instcombine -force-vector-width=4 -force-vector-interleave=1 -enable-interleaved-mem-accesses=true < %s | FileCheck %s
-
-target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
-
-; Check that the interleaved-mem-access analysis identifies the access
-; to array 'in' as interleaved, despite the possibly wrapping unsigned
-; 'out_ix' index.
-;
-; In this test the interleave-groups are full (have no gaps), so no wrapping
-; checks are necessary. We can call getPtrStride with Assume=false and
-; ShouldCheckWrap=false to safely figure out that the stride is 2.
-
-; #include <stdlib.h>
-; class Complex {
-; private:
-; float real_;
-; float imaginary_;
-;
-;public:
-; Complex() : real_(0), imaginary_(0) { }
-; Complex(float real, float imaginary) : real_(real), imaginary_(imaginary) { }
-; Complex(const Complex &rhs) : real_(rhs.real()), imaginary_(rhs.imaginary()) { }
-;
-; inline float real() const { return real_; }
-; inline float imaginary() const { return imaginary_; }
-;};
-;
-;void test(Complex * __restrict__ out, Complex * __restrict__ in, size_t out_start, size_t size)
-;{
-; for (size_t out_offset = 0; out_offset < size; ++out_offset)
-; {
-; size_t out_ix = out_start + out_offset;
-; Complex t0 = in[out_ix];
-; out[out_ix] = t0;
-; }
-;}
-
-; CHECK: vector.body:
-; CHECK: %wide.vec = load <8 x i32>, <8 x i32>* {{.*}}, align 4
-; CHECK: shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
-; CHECK: shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 1, i32 3, i32 5, i32 7>
-
-%class.Complex = type { float, float }
-
-define void @_Z4testP7ComplexS0_mm(%class.Complex* noalias nocapture %out, %class.Complex* noalias nocapture readonly %in, i64 %out_start, i64 %size) local_unnamed_addr {
-entry:
- %cmp9 = icmp eq i64 %size, 0
- br i1 %cmp9, label %for.cond.cleanup, label %for.body.preheader
-
-for.body.preheader:
- br label %for.body
-
-for.cond.cleanup.loopexit:
- br label %for.cond.cleanup
-
-for.cond.cleanup:
- ret void
-
-for.body:
- %out_offset.010 = phi i64 [ %inc, %for.body ], [ 0, %for.body.preheader ]
- %add = add i64 %out_offset.010, %out_start
- %arrayidx = getelementptr inbounds %class.Complex, %class.Complex* %in, i64 %add
- %0 = bitcast %class.Complex* %arrayidx to i32*
- %1 = load i32, i32* %0, align 4
- %imaginary_.i.i = getelementptr inbounds %class.Complex, %class.Complex* %in, i64 %add, i32 1
- %2 = bitcast float* %imaginary_.i.i to i32*
- %3 = load i32, i32* %2, align 4
- %arrayidx1 = getelementptr inbounds %class.Complex, %class.Complex* %out, i64 %add
- %4 = bitcast %class.Complex* %arrayidx1 to i64*
- %t0.sroa.4.0.insert.ext = zext i32 %3 to i64
- %t0.sroa.4.0.insert.shift = shl nuw i64 %t0.sroa.4.0.insert.ext, 32
- %t0.sroa.0.0.insert.ext = zext i32 %1 to i64
- %t0.sroa.0.0.insert.insert = or i64 %t0.sroa.4.0.insert.shift, %t0.sroa.0.0.insert.ext
- store i64 %t0.sroa.0.0.insert.insert, i64* %4, align 4
- %inc = add nuw i64 %out_offset.010, 1
- %exitcond = icmp eq i64 %inc, %size
- br i1 %exitcond, label %for.cond.cleanup.loopexit, label %for.body
-}
+++ /dev/null
-; RUN: opt -S -loop-vectorize -instcombine -force-vector-width=4 -force-vector-interleave=1 -enable-interleaved-mem-accesses=true < %s | FileCheck %s
-
-target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
-
-; Check that the interleaved-mem-access analysis currently does not create an
-; interleave group for the access to array 'in' due to the possibly wrapping
-; unsigned 'out_ix' index.
-;
-; In this test the interleave-group of the loads is not full (has gaps), so
-; the wrapping checks are necessary. Here this cannot be done statically so
-; runtime checks are needed, but with Assume=false getPtrStride cannot add
-; runtime checks and as a result we can't create the interleave-group.
-;
-; FIXME: This is currently a missed optimization until we can use Assume=true
-; with proper threshold checks. Once we do that the candidate interleave-group
-; will not be invalidated by the wrapping checks.
-
-; #include <stdlib.h>
-; void test(float * __restrict__ out, float * __restrict__ in, size_t size)
-; {
-; for (size_t out_offset = 0; out_offset < size; ++out_offset)
-; {
-; float t0 = in[2*out_offset];
-; out[out_offset] = t0;
-; }
-; }
-
-; CHECK: vector.body:
-; CHECK-NOT: %wide.vec = load <8 x i32>, <8 x i32>* {{.*}}, align 4
-; CHECK-NOT: shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
-
-define void @_Z4testPfS_m(float* noalias nocapture %out, float* noalias nocapture readonly %in, i64 %size) local_unnamed_addr {
-entry:
- %cmp7 = icmp eq i64 %size, 0
- br i1 %cmp7, label %for.cond.cleanup, label %for.body.preheader
-
-for.body.preheader:
- br label %for.body
-
-for.cond.cleanup.loopexit:
- br label %for.cond.cleanup
-
-for.cond.cleanup:
- ret void
-
-for.body:
- %out_offset.08 = phi i64 [ %inc, %for.body ], [ 0, %for.body.preheader ]
- %mul = shl i64 %out_offset.08, 1
- %arrayidx = getelementptr inbounds float, float* %in, i64 %mul
- %0 = bitcast float* %arrayidx to i32*
- %1 = load i32, i32* %0, align 4
- %arrayidx1 = getelementptr inbounds float, float* %out, i64 %out_offset.08
- %2 = bitcast float* %arrayidx1 to i32*
- store i32 %1, i32* %2, align 4
- %inc = add nuw i64 %out_offset.08, 1
- %exitcond = icmp eq i64 %inc, %size
- br i1 %exitcond, label %for.cond.cleanup.loopexit, label %for.body
-}
+++ /dev/null
-; RUN: opt -S -loop-vectorize -instcombine -force-vector-width=4 -force-vector-interleave=1 -enable-interleaved-mem-accesses=true < %s | FileCheck %s
-
-target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
-
-; Check that the interleaved-mem-access analysis currently does not create an
-; interleave group for access 'a' due to the possible pointer wrap-around.
-;
-; To begin with, in this test the candidate interleave group can be created
-; only when getPtrStride is called with Assume=true. Next, because
-; the interleave-group of the loads is not full (has gaps), we also need to check
-; for possible pointer wrapping. Here we currently use Assume=false and as a
-; result cannot prove the transformation is safe and therefore invalidate the
-; candidate interleave group.
-;
-; FIXME: This is a missed optimization. Once we use Assume=true here, we will
-; not have to invalidate the group.
-
-; void func(unsigned * __restrict a, unsigned * __restrict b, unsigned char x, unsigned char y) {
-; int i = 0;
-; for (unsigned char index = x; i < y; index +=2, ++i)
-; b[i] = a[index] * 2;
-;
-; }
-
-; CHECK: vector.body:
-; CHECK-NOT: %wide.vec = load <8 x i32>, <8 x i32>* {{.*}}, align 4
-; CHECK-NOT: shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
-
-define void @_Z4funcPjS_hh(i32* noalias nocapture readonly %a, i32* noalias nocapture %b, i8 zeroext %x, i8 zeroext %y) local_unnamed_addr {
-entry:
- %cmp9 = icmp eq i8 %y, 0
- br i1 %cmp9, label %for.cond.cleanup, label %for.body.preheader
-
-for.body.preheader:
- %wide.trip.count = zext i8 %y to i64
- br label %for.body
-
-for.cond.cleanup.loopexit:
- br label %for.cond.cleanup
-
-for.cond.cleanup:
- ret void
-
-for.body:
- %indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %for.body.preheader ]
- %index.011 = phi i8 [ %add, %for.body ], [ %x, %for.body.preheader ]
- %idxprom = zext i8 %index.011 to i64
- %arrayidx = getelementptr inbounds i32, i32* %a, i64 %idxprom
- %0 = load i32, i32* %arrayidx, align 4
- %mul = shl i32 %0, 1
- %arrayidx2 = getelementptr inbounds i32, i32* %b, i64 %indvars.iv
- store i32 %mul, i32* %arrayidx2, align 4
- %add = add i8 %index.011, 2
- %indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
- %exitcond = icmp eq i64 %indvars.iv.next, %wide.trip.count
- br i1 %exitcond, label %for.cond.cleanup.loopexit, label %for.body
-}