phy: qcom-qmp-pcie: clean up power-down handling

Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 offset during power on and power off.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index bdbd18b..1105d43 100644 (file)
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -98,18 +98,21 @@ static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
        [QPHY_SW_RESET]                 = 0x00,
        [QPHY_START_CTRL]               = 0x08,
        [QPHY_PCS_STATUS]               = 0x174,
+       [QPHY_PCS_POWER_DOWN_CONTROL]   = 0x04,
 };
 
 static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
        [QPHY_SW_RESET]                 = 0x00,
        [QPHY_START_CTRL]               = 0x08,
        [QPHY_PCS_STATUS]               = 0x174,
+       [QPHY_PCS_POWER_DOWN_CONTROL]   = 0x04,
 };
 
 static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
        [QPHY_SW_RESET]                 = 0x00,
        [QPHY_START_CTRL]               = 0x08,
        [QPHY_PCS_STATUS]               = 0x2ac,
+       [QPHY_PCS_POWER_DOWN_CONTROL]   = 0x04,
 };
 
 static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -1999,13 +2002,8 @@ static int qmp_pcie_init(struct phy *phy)
        if (ret)
                goto err_assert_reset;
 
-       if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL])
-               qphy_setbits(pcs,
-                               cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
-                               cfg->pwrdn_ctrl);
-       else
-               qphy_setbits(pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
-                               cfg->pwrdn_ctrl);
+       qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+                       cfg->pwrdn_ctrl);
 
        return 0;
 
@@ -2112,13 +2110,8 @@ static int qmp_pcie_power_off(struct phy *phy)
        qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
 
        /* Put PHY into POWER DOWN state: active low */
-       if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) {
-               qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
-                            cfg->pwrdn_ctrl);
-       } else {
-               qphy_clrbits(qphy->pcs, QPHY_V2_PCS_POWER_DOWN_CONTROL,
-                               cfg->pwrdn_ctrl);
-       }
+       qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
+                       cfg->pwrdn_ctrl);
 
        return 0;
 }