OSDN Git Service

mac80211_hwsim: add hwsim_tx_rate_flags to netlink attributes
authorBenjamin Beichler <benjamin.beichler@uni-rostock.de>
Wed, 10 Jan 2018 16:42:55 +0000 (17:42 +0100)
committerJohannes Berg <johannes.berg@intel.com>
Mon, 15 Jan 2018 12:18:42 +0000 (13:18 +0100)
For correct interpretation of a tx rate, the corresponding rate flags are
needed (e.g. whether a HT-MCS rate or a legacy rate) and moreover for more
correct simulation the other infos of the flags are important (like
short-GI). Keeping compatibility, the flags are not integrated into the
existing hwsim_tx_rate, but transmitted as an additional netlink attribute.

Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
drivers/net/wireless/mac80211_hwsim.c
drivers/net/wireless/mac80211_hwsim.h

index 9339615..6bf063a 100644 (file)
@@ -1018,6 +1018,36 @@ static int hwsim_unicast_netgroup(struct mac80211_hwsim_data *data,
        return res;
 }
 
+static inline u16 trans_tx_rate_flags_ieee2hwsim(struct ieee80211_tx_rate *rate)
+{
+       u16 result = 0;
+
+       if (rate->flags & IEEE80211_TX_RC_USE_RTS_CTS)
+               result |= MAC80211_HWSIM_TX_RC_USE_RTS_CTS;
+       if (rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
+               result |= MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT;
+       if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+               result |= MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE;
+       if (rate->flags & IEEE80211_TX_RC_MCS)
+               result |= MAC80211_HWSIM_TX_RC_MCS;
+       if (rate->flags & IEEE80211_TX_RC_GREEN_FIELD)
+               result |= MAC80211_HWSIM_TX_RC_GREEN_FIELD;
+       if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+               result |= MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH;
+       if (rate->flags & IEEE80211_TX_RC_DUP_DATA)
+               result |= MAC80211_HWSIM_TX_RC_DUP_DATA;
+       if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
+               result |= MAC80211_HWSIM_TX_RC_SHORT_GI;
+       if (rate->flags & IEEE80211_TX_RC_VHT_MCS)
+               result |= MAC80211_HWSIM_TX_RC_VHT_MCS;
+       if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
+               result |= MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH;
+       if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
+               result |= MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH;
+
+       return result;
+}
+
 static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
                                       struct sk_buff *my_skb,
                                       int dst_portid)
@@ -1030,6 +1060,7 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
        unsigned int hwsim_flags = 0;
        int i;
        struct hwsim_tx_rate tx_attempts[IEEE80211_TX_MAX_RATES];
+       struct hwsim_tx_rate_flag tx_attempts_flags[IEEE80211_TX_MAX_RATES];
        uintptr_t cookie;
 
        if (data->ps != PS_DISABLED)
@@ -1081,7 +1112,11 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
 
        for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
                tx_attempts[i].idx = info->status.rates[i].idx;
+               tx_attempts_flags[i].idx = info->status.rates[i].idx;
                tx_attempts[i].count = info->status.rates[i].count;
+               tx_attempts_flags[i].flags =
+                               trans_tx_rate_flags_ieee2hwsim(
+                                               &info->status.rates[i]);
        }
 
        if (nla_put(skb, HWSIM_ATTR_TX_INFO,
@@ -1089,6 +1124,11 @@ static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
                    tx_attempts))
                goto nla_put_failure;
 
+       if (nla_put(skb, HWSIM_ATTR_TX_INFO_FLAGS,
+                   sizeof(struct hwsim_tx_rate_flag) * IEEE80211_TX_MAX_RATES,
+                   tx_attempts_flags))
+               goto nla_put_failure;
+
        /* We create a cookie to identify this skb */
        data->pending_cookie++;
        cookie = data->pending_cookie;
@@ -2983,7 +3023,6 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
        for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
                txi->status.rates[i].idx = tx_attempts[i].idx;
                txi->status.rates[i].count = tx_attempts[i].count;
-               /*txi->status.rates[i].flags = 0;*/
        }
 
        txi->status.ack_signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]);
index 3f5eda5..a96a79c 100644 (file)
@@ -64,7 +64,8 @@ enum hwsim_tx_control_flags {
  * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to
  *     kernel, uses:
  *     %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS,
- *     %HWSIM_ATTR_TX_INFO, %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
+ *     %HWSIM_ATTR_TX_INFO, %WSIM_ATTR_TX_INFO_FLAGS,
+ *     %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
  * @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters,
  *     returns the radio ID (>= 0) or negative on errors, if successful
  *     then multicast the result
@@ -123,6 +124,8 @@ enum {
  * @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666
  * @HWSIM_ATTR_NO_VIF:  Do not create vif (wlanX) when creating radio.
  * @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received.
+ * @HWSIM_ATTR_TX_INFO_FLAGS: additional flags for corresponding
+ *     rates of %HWSIM_ATTR_TX_INFO
  * @__HWSIM_ATTR_MAX: enum limit
  */
 
@@ -149,6 +152,7 @@ enum {
        HWSIM_ATTR_NO_VIF,
        HWSIM_ATTR_FREQ,
        HWSIM_ATTR_PAD,
+       HWSIM_ATTR_TX_INFO_FLAGS,
        __HWSIM_ATTR_MAX,
 };
 #define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
@@ -171,4 +175,66 @@ struct hwsim_tx_rate {
        u8 count;
 } __packed;
 
+/**
+ * enum hwsim_tx_rate_flags - per-rate flags set by the rate control algorithm.
+ *     Inspired by structure mac80211_rate_control_flags. New flags may be
+ *     appended, but old flags not deleted, to keep compatibility for
+ *     userspace.
+ *
+ * These flags are set by the Rate control algorithm for each rate during tx,
+ * in the @flags member of struct ieee80211_tx_rate.
+ *
+ * @MAC80211_HWSIM_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
+ * @MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
+ *     This is set if the current BSS requires ERP protection.
+ * @MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
+ * @MAC80211_HWSIM_TX_RC_MCS: HT rate.
+ * @MAC80211_HWSIM_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is
+ *     split into a higher 4 bits (Nss) and lower 4 bits (MCS number)
+ * @MAC80211_HWSIM_TX_RC_GREEN_FIELD: Indicates whether this rate should be used
+ *     in Greenfield mode.
+ * @MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be
+ *     40 MHz.
+ * @MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission
+ * @MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission
+ *     (80+80 isn't supported yet)
+ * @MAC80211_HWSIM_TX_RC_DUP_DATA: The frame should be transmitted on both of
+ *     the adjacent 20 MHz channels, if the current channel type is
+ *     NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
+ * @MAC80211_HWSIM_TX_RC_SHORT_GI: Short Guard interval should be used for this
+ *     rate.
+ */
+enum hwsim_tx_rate_flags {
+       MAC80211_HWSIM_TX_RC_USE_RTS_CTS                = BIT(0),
+       MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT            = BIT(1),
+       MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
+
+       /* rate index is an HT/VHT MCS instead of an index */
+       MAC80211_HWSIM_TX_RC_MCS                        = BIT(3),
+       MAC80211_HWSIM_TX_RC_GREEN_FIELD                = BIT(4),
+       MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH               = BIT(5),
+       MAC80211_HWSIM_TX_RC_DUP_DATA           = BIT(6),
+       MAC80211_HWSIM_TX_RC_SHORT_GI           = BIT(7),
+       MAC80211_HWSIM_TX_RC_VHT_MCS                    = BIT(8),
+       MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH               = BIT(9),
+       MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH              = BIT(10),
+};
+
+/**
+ * struct hwsim_tx_rate - rate selection/status
+ *
+ * @idx: rate index to attempt to send with
+ * @count: number of tries in this rate before going to the next rate
+ *
+ * A value of -1 for @idx indicates an invalid rate and, if used
+ * in an array of retry rates, that no more rates should be tried.
+ *
+ * When used for transmit status reporting, the driver should
+ * always report the rate and number of retries used.
+ *
+ */
+struct hwsim_tx_rate_flag {
+       s8 idx;
+       u16 flags;
+} __packed;
 #endif /* __MAC80211_HWSIM_H */