serial: imx: Enable UCR4_OREN in startup interface

Other than enable Receiver Overrun Interrupt Enable (UCR4_OREN)
in start_tx interface, UCR4_OREN should be enabled before enable
of Receiver.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index d61b89e..79f485b 100644 (file)
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -611,13 +611,6 @@ static void imx_start_tx(struct uart_port *port)
                temp &= ~(UCR1_RRDYEN);
                writel(temp, sport->port.membase + UCR1);
        }
-       /* Clear any pending ORE flag before enabling interrupt */
-       temp = readl(sport->port.membase + USR2);
-       writel(temp | USR2_ORE, sport->port.membase + USR2);
-
-       temp = readl(sport->port.membase + UCR4);
-       temp |= UCR4_OREN;
-       writel(temp, sport->port.membase + UCR4);
 
        if (!sport->dma_is_enabled) {
                temp = readl(sport->port.membase + UCR1);
@@ -1178,6 +1171,14 @@ static int imx_startup(struct uart_port *port)
 
        writel(temp, sport->port.membase + UCR1);
 
+       /* Clear any pending ORE flag before enabling interrupt */
+       temp = readl(sport->port.membase + USR2);
+       writel(temp | USR2_ORE, sport->port.membase + USR2);
+
+       temp = readl(sport->port.membase + UCR4);
+       temp |= UCR4_OREN;
+       writel(temp, sport->port.membase + UCR4);
+
        temp = readl(sport->port.membase + UCR2);
        temp |= (UCR2_RXEN | UCR2_TXEN);
        if (!sport->have_rtscts)