arm64: dts: qcom: sm6375: Add pin configs for some QUP configurations

Add the pin setup for SPI/I2C configurations that are supported
downstream. I can guesstimate the correct settings for other buses,
but:

- I have no hardware to test it on
- Some QUPs are straight up missing pin funcs in TLMM
- Vendors probably didn't really care and used whatever was there in
the reference design and BSP - should any other be used, they can be
configured at a later time

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115152727.9736-5-konrad.dybcio@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 62a64dd..9521568 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -519,6 +519,49 @@
                        gpio-controller;
                        #interrupt-cells = <2>;
                        #gpio-cells = <2>;
+
+                       qup_i2c0_default: qup-i2c0-default-state {
+                               pins = "gpio0", "gpio1";
+                               function = "qup00";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c1_default: qup-i2c1-default-state {
+                               pins = "gpio61", "gpio62";
+                               function = "qup01";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c2_default: qup-i2c2-default-state {
+                               pins = "gpio45", "gpio46";
+                               function = "qup02";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c8_default: qup-i2c8-default-state {
+                               pins = "gpio19", "gpio20";
+                               /* TLMM, GCC and vendor DT all have different indices.. */
+                               function = "qup12";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_i2c10_default: qup-i2c10-default-state {
+                               pins = "gpio4", "gpio5";
+                               function = "qup10";
+                               drive-strength = <2>;
+                               bias-pull-up;
+                       };
+
+                       qup_spi0_default: qup-spi0-default-state {
+                               pins = "gpio0", "gpio1", "gpio2", "gpio3";
+                               function = "qup00";
+                               drive-strength = <6>;
+                               bias-disable;
+                       };
                };
 
                gcc: clock-controller@1400000 {