do { } while (0)
#endif
+struct VFIODevice;
+
+typedef struct VFIOQuirk {
+ MemoryRegion mem;
+ struct VFIODevice *vdev;
+ QLIST_ENTRY(VFIOQuirk) next;
+ uint32_t data;
+ uint32_t data2;
+} VFIOQuirk;
+
typedef struct VFIOBAR {
off_t fd_offset; /* offset of BAR within device fd */
int fd; /* device fd, allows us to pass VFIOBAR as opaque data */
size_t size;
uint32_t flags; /* VFIO region flags (rd/wr/mmap) */
uint8_t nr; /* cache the BAR number for debug */
+ QLIST_HEAD(, VFIOQuirk) quirks;
} VFIOBAR;
typedef struct VFIOVGARegion {
MemoryRegion mem;
off_t offset;
int nr;
+ QLIST_HEAD(, VFIOQuirk) quirks;
} VFIOVGARegion;
typedef struct VFIOVGA {
QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
} VFIOINTx;
-struct VFIODevice;
-
typedef struct VFIOMSIVector {
EventNotifier interrupt; /* eventfd triggered on interrupt */
struct VFIODevice *vdev; /* back pointer to device */
static void vfio_disable_interrupts(VFIODevice *vdev);
static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
+static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
+ uint32_t val, int len);
static void vfio_mmap_set_enabled(VFIODevice *vdev, bool enabled);
/*
};
/*
+ * Device specific quirks
+ */
+
+#define PCI_VENDOR_ID_ATI 0x1002
+
+/*
+ * Device 1002:68f9 (Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon
+ * HD 5450/6350]) reports the upper byte of the physical address of the
+ * I/O port BAR4 through VGA register 0x3c3. The BAR is 256 bytes, so the
+ * lower byte is known to be zero. Probing for this quirk reads 0xff from
+ * port 0x3c3 on some devices so we store the physical address and replace
+ * reads with the virtual address any time it matches. XXX Research when
+ * to enable quirk.
+ */
+static uint64_t vfio_ati_3c3_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ PCIDevice *pdev = &vdev->pdev;
+ uint64_t data = vfio_vga_read(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
+ addr + 0x3, size);
+
+ if (data == quirk->data) {
+ data = pci_get_byte(pdev->config + PCI_BASE_ADDRESS_4 + 1);
+ DPRINTF("%s(0x3c3, 1) = 0x%"PRIx64"\n", __func__, data);
+ }
+
+ return data;
+}
+
+static const MemoryRegionOps vfio_ati_3c3_quirk = {
+ .read = vfio_ati_3c3_quirk_read,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_vga_probe_ati_3c3_quirk(VFIODevice *vdev)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_4;
+ uint32_t physbar;
+ VFIOQuirk *quirk;
+
+ if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI ||
+ vdev->bars[4].size < 256) {
+ return;
+ }
+
+ /* Get I/O port BAR physical address */
+ if (pread(vdev->fd, &physbar, 4, physoffset) != 4) {
+ error_report("vfio: probe failed for ATI/AMD 0x3c3 quirk on device "
+ "%04x:%02x:%02x.%x", vdev->host.domain,
+ vdev->host.bus, vdev->host.slot, vdev->host.function);
+ return;
+ }
+
+ quirk = g_malloc0(sizeof(*quirk));
+ quirk->vdev = vdev;
+ quirk->data = (physbar >> 8) & 0xff;
+
+ memory_region_init_io(&quirk->mem, &vfio_ati_3c3_quirk, quirk,
+ "vfio-ati-3c3-quirk", 1);
+ memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem, 3,
+ &quirk->mem);
+
+ QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
+ quirk, next);
+
+ DPRINTF("Enabled ATI/AMD quirk 0x3c3 for device %04x:%02x:%02x.%x\n",
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function);
+}
+
+/*
+ * Device 1002:68f9 (Advanced Micro Devices [AMD] nee ATI Cedar PRO [Radeon
+ * HD 5450/6350]) reports the physical address of MMIO BAR0 through a
+ * write/read operation on I/O port BAR4. When uint32_t 0x4010 is written
+ * to offset 0x0, the subsequent read from offset 0x4 returns the contents
+ * of BAR0. Test for this quirk on all ATI/AMD devices. XXX - Note that
+ * 0x10 is the offset of BAR0 in config sapce, is this a window to all of
+ * config space?
+ */
+static uint64_t vfio_ati_4010_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ PCIDevice *pdev = &vdev->pdev;
+ uint64_t data = vfio_bar_read(&vdev->bars[4], addr, size);
+
+ if (addr == 4 && size == 4 && quirk->data) {
+ data = pci_get_long(pdev->config + PCI_BASE_ADDRESS_0);
+ DPRINTF("%s(BAR4+0x4) = 0x%"PRIx64"\n", __func__, data);
+ }
+
+ quirk->data = 0;
+
+ return data;
+}
+
+static void vfio_ati_4010_quirk_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+
+ vfio_bar_write(&vdev->bars[4], addr, data, size);
+
+ quirk->data = (addr == 0 && size == 4 && data == 0x4010) ? 1 : 0;
+}
+
+static const MemoryRegionOps vfio_ati_4010_quirk = {
+ .read = vfio_ati_4010_quirk_read,
+ .write = vfio_ati_4010_quirk_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_probe_ati_4010_quirk(VFIODevice *vdev, int nr)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_0;
+ uint32_t physbar0;
+ uint64_t data;
+ VFIOQuirk *quirk;
+
+ if (!vdev->has_vga || nr != 4 || !vdev->bars[0].size ||
+ pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
+ return;
+ }
+
+ /* Get I/O port BAR physical address */
+ if (pread(vdev->fd, &physbar0, 4, physoffset) != 4) {
+ error_report("vfio: probe failed for ATI/AMD 0x4010 quirk on device "
+ "%04x:%02x:%02x.%x", vdev->host.domain,
+ vdev->host.bus, vdev->host.slot, vdev->host.function);
+ return;
+ }
+
+ /* Write 0x4010 to I/O port BAR offset 0 */
+ vfio_bar_write(&vdev->bars[4], 0, 0x4010, 4);
+ /* Read back result */
+ data = vfio_bar_read(&vdev->bars[4], 4, 4);
+
+ /* If the register matches the physical address of BAR0, we need a quirk */
+ if (data != physbar0) {
+ return;
+ }
+
+ quirk = g_malloc0(sizeof(*quirk));
+ quirk->vdev = vdev;
+
+ memory_region_init_io(&quirk->mem, &vfio_ati_4010_quirk, quirk,
+ "vfio-ati-4010-quirk", 8);
+ memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
+
+ QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
+
+ DPRINTF("Enabled ATI/AMD quirk 0x4010 for device %04x:%02x:%02x.%x\n",
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function);
+}
+
+/*
+ * Device 1002:5b63 (Advanced Micro Devices [AMD] nee ATI RV370 [Radeon X550])
+ * retrieves the upper half of the MMIO BAR0 physical address by writing
+ * 0xf10 to I/O port BAR1 offset 0 and reading the result from offset 6.
+ * XXX - 0x10 is the offset of BAR0 in PCI config space, this could provide
+ * full access to config space. Config space is little endian, so the data
+ * register probably starts at 0x4.
+ */
+static uint64_t vfio_ati_f10_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ PCIDevice *pdev = &vdev->pdev;
+ uint64_t data = vfio_bar_read(&vdev->bars[1], addr, size);
+
+ if (addr == 6 && size == 2 && quirk->data) {
+ data = pci_get_word(pdev->config + PCI_BASE_ADDRESS_0 + 2);
+ DPRINTF("%s(BAR1+0x6) = 0x%"PRIx64"\n", __func__, data);
+ }
+
+ quirk->data = 0;
+
+ return data;
+}
+
+static void vfio_ati_f10_quirk_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+
+ vfio_bar_write(&vdev->bars[1], addr, data, size);
+
+ quirk->data = (addr == 0 && size == 4 && data == 0xf10) ? 1 : 0;
+}
+
+static const MemoryRegionOps vfio_ati_f10_quirk = {
+ .read = vfio_ati_f10_quirk_read,
+ .write = vfio_ati_f10_quirk_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_probe_ati_f10_quirk(VFIODevice *vdev, int nr)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ off_t physoffset = vdev->config_offset + PCI_BASE_ADDRESS_0;
+ uint32_t physbar0;
+ uint64_t data;
+ VFIOQuirk *quirk;
+
+ if (!vdev->has_vga || nr != 1 || !vdev->bars[0].size ||
+ pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_ATI) {
+ return;
+ }
+
+ /* Get I/O port BAR physical address */
+ if (pread(vdev->fd, &physbar0, 4, physoffset) != 4) {
+ error_report("vfio: probe failed for ATI/AMD 0xf10 quirk on device "
+ "%04x:%02x:%02x.%x", vdev->host.domain,
+ vdev->host.bus, vdev->host.slot, vdev->host.function);
+ return;
+ }
+
+ vfio_bar_write(&vdev->bars[1], 0, 0xf10, 4);
+ data = vfio_bar_read(&vdev->bars[1], 0x6, 2);
+
+ /* If the register matches the physical address of BAR0, we need a quirk */
+ if (data != (le32_to_cpu(physbar0) >> 16)) {
+ return;
+ }
+
+ quirk = g_malloc0(sizeof(*quirk));
+ quirk->vdev = vdev;
+
+ memory_region_init_io(&quirk->mem, &vfio_ati_f10_quirk, quirk,
+ "vfio-ati-f10-quirk", 8);
+ memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
+
+ QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
+
+ DPRINTF("Enabled ATI/AMD quirk 0xf10 for device %04x:%02x:%02x.%x\n",
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function);
+}
+
+#define PCI_VENDOR_ID_NVIDIA 0x10de
+
+/*
+ * Nvidia has several different methods to get to config space, the
+ * nouveu project has several of these documented here:
+ * https://github.com/pathscale/envytools/tree/master/hwdocs
+ *
+ * The first quirk is actually not documented in envytools and is found
+ * on 10de:01d1 (NVIDIA Corporation G72 [GeForce 7300 LE]). This is an
+ * NV46 chipset. The backdoor uses the legacy VGA I/O ports to access
+ * the mirror of PCI config space found at BAR0 offset 0x1800. The access
+ * sequence first writes 0x338 to I/O port 0x3d4. The target offset is
+ * then written to 0x3d0. Finally 0x538 is written for a read and 0x738
+ * is written for a write to 0x3d4. The BAR0 offset is then accessible
+ * through 0x3d0. This quirk doesn't seem to be necessary on newer cards
+ * that use the I/O port BAR5 window but it doesn't hurt to leave it.
+ */
+enum {
+ NV_3D0_NONE,
+ NV_3D0_SELECT,
+ NV_3D0_WINDOW,
+ NV_3D0_READ,
+ NV_3D0_WRITE,
+};
+
+static uint64_t vfio_nvidia_3d0_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ PCIDevice *pdev = &vdev->pdev;
+ uint64_t data = vfio_vga_read(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
+ addr + 0x10, size);
+
+ if (quirk->data == NV_3D0_READ && addr == 0) {
+ data = vfio_pci_read_config(pdev, quirk->data2, size);
+ DPRINTF("%s(0x3d0, %d) = 0x%"PRIx64"\n", __func__, size, data);
+ }
+
+ quirk->data = NV_3D0_NONE;
+
+ return data;
+}
+
+static void vfio_nvidia_3d0_quirk_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ PCIDevice *pdev = &vdev->pdev;
+
+ switch (quirk->data) {
+ case NV_3D0_NONE:
+ if (addr == 4 && data == 0x338) {
+ quirk->data = NV_3D0_SELECT;
+ }
+ break;
+ case NV_3D0_SELECT:
+ quirk->data = NV_3D0_NONE;
+ if (addr == 0 && (data & ~0xff) == 0x1800) {
+ quirk->data = NV_3D0_WINDOW;
+ quirk->data2 = data & 0xff;
+ }
+ break;
+ case NV_3D0_WINDOW:
+ quirk->data = NV_3D0_NONE;
+ if (addr == 4) {
+ if (data == 0x538) {
+ quirk->data = NV_3D0_READ;
+ } else if (data == 0x738) {
+ quirk->data = NV_3D0_WRITE;
+ }
+ }
+ break;
+ case NV_3D0_WRITE:
+ quirk->data = NV_3D0_NONE;
+ if (addr == 0) {
+ vfio_pci_write_config(pdev, quirk->data2, data, size);
+ DPRINTF("%s(0x3d0, 0x%"PRIx64", %d)\n", __func__, data, size);
+ return;
+ }
+ break;
+ default:
+ quirk->data = NV_3D0_NONE;
+ }
+
+ vfio_vga_write(&vdev->vga.region[QEMU_PCI_VGA_IO_HI],
+ addr + 0x10, data, size);
+}
+
+static const MemoryRegionOps vfio_nvidia_3d0_quirk = {
+ .read = vfio_nvidia_3d0_quirk_read,
+ .write = vfio_nvidia_3d0_quirk_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_vga_probe_nvidia_3d0_quirk(VFIODevice *vdev)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ VFIOQuirk *quirk;
+
+ if (pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA ||
+ !vdev->bars[1].size) {
+ return;
+ }
+
+ quirk = g_malloc0(sizeof(*quirk));
+ quirk->vdev = vdev;
+
+ memory_region_init_io(&quirk->mem, &vfio_nvidia_3d0_quirk, quirk,
+ "vfio-nvidia-3d0-quirk", 6);
+ memory_region_add_subregion(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem,
+ 0x10, &quirk->mem);
+
+ QLIST_INSERT_HEAD(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks,
+ quirk, next);
+
+ DPRINTF("Enabled NVIDIA VGA 0x3d0 quirk for device %04x:%02x:%02x.%x\n",
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function);
+}
+
+/*
+ * The second quirk is documented in envytools. The I/O port BAR5 is just
+ * a set of address/data ports to the MMIO BARs. The BAR we care about is
+ * again BAR0. This backdoor is apparently a bit newer than the one above
+ * so we need to not only trap 256 bytes @0x1800, but all of PCI config
+ * space, including extended space is available at the 4k @0x88000.
+ */
+enum {
+ NV_BAR5_ADDRESS = 0x1,
+ NV_BAR5_ENABLE = 0x2,
+ NV_BAR5_MASTER = 0x4,
+ NV_BAR5_VALID = 0x7,
+};
+
+static uint64_t vfio_nvidia_bar5_window_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ uint64_t data = vfio_bar_read(&vdev->bars[5], addr, size);
+
+ if (addr == 0xc && quirk->data == NV_BAR5_VALID) {
+ data = vfio_pci_read_config(&vdev->pdev, quirk->data2, size);
+ DPRINTF("%s(%04x:%02x:%02x.%x:BAR5+0x%"HWADDR_PRIx", %d) = 0x%"
+ PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
+ vdev->host.slot, vdev->host.function, addr, size, data);
+ }
+
+ return data;
+}
+
+static void vfio_nvidia_bar5_window_quirk_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+
+ /*
+ * Use quirk->data to track enables and quirk->data2 for the offset
+ */
+ switch (addr) {
+ case 0x0:
+ if (data & 0x1) {
+ quirk->data |= NV_BAR5_MASTER;
+ } else {
+ quirk->data &= ~NV_BAR5_MASTER;
+ }
+ break;
+ case 0x4:
+ if (data & 0x1) {
+ quirk->data |= NV_BAR5_ENABLE;
+ } else {
+ quirk->data &= ~NV_BAR5_ENABLE;
+ }
+ break;
+ case 0x8:
+ if (quirk->data & NV_BAR5_MASTER) {
+ if ((data & ~0xfff) == 0x88000) {
+ quirk->data |= NV_BAR5_ADDRESS;
+ quirk->data2 = data & 0xfff;
+ } else if ((data & ~0xff) == 0x1800) {
+ quirk->data |= NV_BAR5_ADDRESS;
+ quirk->data2 = data & 0xff;
+ } else {
+ quirk->data &= ~NV_BAR5_ADDRESS;
+ }
+ }
+ break;
+ case 0xc:
+ if (quirk->data == NV_BAR5_VALID) {
+ vfio_pci_write_config(&vdev->pdev, quirk->data2, data, size);
+ DPRINTF("%s(%04x:%02x:%02x.%x:BAR5+0x%"HWADDR_PRIx", 0x%"
+ PRIx64", %d)\n", __func__, vdev->host.domain,
+ vdev->host.bus, vdev->host.slot, vdev->host.function,
+ addr, data, size);
+ return;
+ }
+ }
+
+ vfio_bar_write(&vdev->bars[5], addr, data, size);
+}
+
+static const MemoryRegionOps vfio_nvidia_bar5_window_quirk = {
+ .read = vfio_nvidia_bar5_window_quirk_read,
+ .write = vfio_nvidia_bar5_window_quirk_write,
+ .valid.min_access_size = 4,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_probe_nvidia_bar5_window_quirk(VFIODevice *vdev, int nr)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ VFIOQuirk *quirk;
+
+ if (!vdev->has_vga || nr != 5 ||
+ pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA) {
+ return;
+ }
+
+ quirk = g_malloc0(sizeof(*quirk));
+ quirk->vdev = vdev;
+
+ memory_region_init_io(&quirk->mem, &vfio_nvidia_bar5_window_quirk, quirk,
+ "vfio-nvidia-bar5-window-quirk", 16);
+ memory_region_add_subregion_overlap(&vdev->bars[nr].mem, 0, &quirk->mem, 1);
+
+ QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
+
+ DPRINTF("Enabled NVIDIA BAR5 window quirk for device %04x:%02x:%02x.%x\n",
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function);
+}
+
+/*
+ * Finally, BAR0 itself. We want to redirect any accesses to either
+ * 0x1800 or 0x88000 through the PCI config space access functions.
+ *
+ * NB - quirk at a page granularity or else they don't seem to work when
+ * BARs are mmap'd
+ *
+ * Here's offset 0x88000...
+ */
+static uint64_t vfio_nvidia_bar0_88000_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ hwaddr base = 0x88000 & TARGET_PAGE_MASK;
+ hwaddr offset = 0x88000 & ~TARGET_PAGE_MASK;
+ uint64_t data = vfio_bar_read(&vdev->bars[0], addr + base, size);
+
+ if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
+ data = vfio_pci_read_config(&vdev->pdev, addr - offset, size);
+
+ DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", %d) = 0x%"
+ PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
+ vdev->host.slot, vdev->host.function, addr + base, size, data);
+ }
+
+ return data;
+}
+
+static void vfio_nvidia_bar0_88000_quirk_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ hwaddr base = 0x88000 & TARGET_PAGE_MASK;
+ hwaddr offset = 0x88000 & ~TARGET_PAGE_MASK;
+
+ if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
+ vfio_pci_write_config(&vdev->pdev, addr - offset, data, size);
+
+ DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", 0x%"
+ PRIx64", %d)\n", __func__, vdev->host.domain, vdev->host.bus,
+ vdev->host.slot, vdev->host.function, addr + base, data, size);
+ } else {
+ vfio_bar_write(&vdev->bars[0], addr + base, data, size);
+ }
+}
+
+static const MemoryRegionOps vfio_nvidia_bar0_88000_quirk = {
+ .read = vfio_nvidia_bar0_88000_quirk_read,
+ .write = vfio_nvidia_bar0_88000_quirk_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_probe_nvidia_bar0_88000_quirk(VFIODevice *vdev, int nr)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ VFIOQuirk *quirk;
+
+ if (!vdev->has_vga || nr != 0 ||
+ pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA) {
+ return;
+ }
+
+ quirk = g_malloc0(sizeof(*quirk));
+ quirk->vdev = vdev;
+
+ memory_region_init_io(&quirk->mem, &vfio_nvidia_bar0_88000_quirk, quirk,
+ "vfio-nvidia-bar0-88000-quirk",
+ TARGET_PAGE_ALIGN(PCIE_CONFIG_SPACE_SIZE));
+ memory_region_add_subregion_overlap(&vdev->bars[nr].mem,
+ 0x88000 & TARGET_PAGE_MASK,
+ &quirk->mem, 1);
+
+ QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
+
+ DPRINTF("Enabled NVIDIA BAR0 0x88000 quirk for device %04x:%02x:%02x.%x\n",
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function);
+}
+
+/*
+ * And here's the same for BAR0 offset 0x1800...
+ */
+static uint64_t vfio_nvidia_bar0_1800_quirk_read(void *opaque,
+ hwaddr addr, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ hwaddr base = 0x1800 & TARGET_PAGE_MASK;
+ hwaddr offset = 0x1800 & ~TARGET_PAGE_MASK;
+ uint64_t data = vfio_bar_read(&vdev->bars[0], addr + base, size);
+
+ if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
+ data = vfio_pci_read_config(&vdev->pdev, addr - offset, size);
+
+ DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", %d) = 0x%"
+ PRIx64"\n", __func__, vdev->host.domain, vdev->host.bus,
+ vdev->host.slot, vdev->host.function, addr + base, size, data);
+ }
+
+ return data;
+}
+
+static void vfio_nvidia_bar0_1800_quirk_write(void *opaque, hwaddr addr,
+ uint64_t data, unsigned size)
+{
+ VFIOQuirk *quirk = opaque;
+ VFIODevice *vdev = quirk->vdev;
+ hwaddr base = 0x1800 & TARGET_PAGE_MASK;
+ hwaddr offset = 0x1800 & ~TARGET_PAGE_MASK;
+
+ if (ranges_overlap(addr, size, offset, PCI_CONFIG_SPACE_SIZE)) {
+ vfio_pci_write_config(&vdev->pdev, addr - offset, data, size);
+
+ DPRINTF("%s(%04x:%02x:%02x.%x:BAR0+0x%"HWADDR_PRIx", 0x%"
+ PRIx64", %d)\n", __func__, vdev->host.domain, vdev->host.bus,
+ vdev->host.slot, vdev->host.function, addr + base, data, size);
+ } else {
+ vfio_bar_write(&vdev->bars[0], addr + base, data, size);
+ }
+}
+
+static const MemoryRegionOps vfio_nvidia_bar0_1800_quirk = {
+ .read = vfio_nvidia_bar0_1800_quirk_read,
+ .write = vfio_nvidia_bar0_1800_quirk_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void vfio_probe_nvidia_bar0_1800_quirk(VFIODevice *vdev, int nr)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ VFIOQuirk *quirk;
+
+ if (!vdev->has_vga || nr != 0 ||
+ pci_get_word(pdev->config + PCI_VENDOR_ID) != PCI_VENDOR_ID_NVIDIA) {
+ return;
+ }
+
+ /* Log the chipset ID */
+ DPRINTF("Nvidia NV%02x\n",
+ (unsigned int)(vfio_bar_read(&vdev->bars[0], 0, 4) >> 20) & 0xff);
+
+ quirk = g_malloc0(sizeof(*quirk));
+ quirk->vdev = vdev;
+
+ memory_region_init_io(&quirk->mem, &vfio_nvidia_bar0_1800_quirk, quirk,
+ "vfio-nvidia-bar0-1800-quirk",
+ TARGET_PAGE_ALIGN(PCI_CONFIG_SPACE_SIZE));
+ memory_region_add_subregion_overlap(&vdev->bars[nr].mem,
+ 0x1800 & TARGET_PAGE_MASK,
+ &quirk->mem, 1);
+
+ QLIST_INSERT_HEAD(&vdev->bars[nr].quirks, quirk, next);
+
+ DPRINTF("Enabled NVIDIA BAR0 0x1800 quirk for device %04x:%02x:%02x.%x\n",
+ vdev->host.domain, vdev->host.bus, vdev->host.slot,
+ vdev->host.function);
+}
+
+/*
+ * TODO - Some Nvidia devices provide config access to their companion HDA
+ * device and even to their parent bridge via these config space mirrors.
+ * Add quirks for those regions.
+ */
+
+/*
+ * Common quirk probe entry points.
+ */
+static void vfio_vga_quirk_setup(VFIODevice *vdev)
+{
+ vfio_vga_probe_ati_3c3_quirk(vdev);
+ vfio_vga_probe_nvidia_3d0_quirk(vdev);
+}
+
+static void vfio_vga_quirk_teardown(VFIODevice *vdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vdev->vga.region); i++) {
+ while (!QLIST_EMPTY(&vdev->vga.region[i].quirks)) {
+ VFIOQuirk *quirk = QLIST_FIRST(&vdev->vga.region[i].quirks);
+ memory_region_del_subregion(&vdev->vga.region[i].mem, &quirk->mem);
+ QLIST_REMOVE(quirk, next);
+ g_free(quirk);
+ }
+ }
+}
+
+static void vfio_bar_quirk_setup(VFIODevice *vdev, int nr)
+{
+ vfio_probe_ati_4010_quirk(vdev, nr);
+ vfio_probe_ati_f10_quirk(vdev, nr);
+ vfio_probe_nvidia_bar5_window_quirk(vdev, nr);
+ vfio_probe_nvidia_bar0_88000_quirk(vdev, nr);
+ vfio_probe_nvidia_bar0_1800_quirk(vdev, nr);
+}
+
+static void vfio_bar_quirk_teardown(VFIODevice *vdev, int nr)
+{
+ VFIOBAR *bar = &vdev->bars[nr];
+
+ while (!QLIST_EMPTY(&bar->quirks)) {
+ VFIOQuirk *quirk = QLIST_FIRST(&bar->quirks);
+ memory_region_del_subregion(&bar->mem, &quirk->mem);
+ QLIST_REMOVE(quirk, next);
+ g_free(quirk);
+ }
+}
+
+/*
* PCI config space
*/
static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len)
return;
}
+ vfio_bar_quirk_teardown(vdev, nr);
+
memory_region_del_subregion(&bar->mem, &bar->mmap_mem);
munmap(bar->mmap, memory_region_size(&bar->mmap_mem));
error_report("%s unsupported. Performance may be slow", name);
}
}
+
+ vfio_bar_quirk_setup(vdev, nr);
}
static void vfio_map_bars(VFIODevice *vdev)
pci_register_vga(&vdev->pdev, &vdev->vga.region[QEMU_PCI_VGA_MEM].mem,
&vdev->vga.region[QEMU_PCI_VGA_IO_LO].mem,
&vdev->vga.region[QEMU_PCI_VGA_IO_HI].mem);
+ vfio_vga_quirk_setup(vdev);
}
}
}
if (vdev->has_vga) {
+ vfio_vga_quirk_teardown(vdev);
pci_unregister_vga(&vdev->pdev);
memory_region_destroy(&vdev->vga.region[QEMU_PCI_VGA_MEM].mem);
memory_region_destroy(&vdev->vga.region[QEMU_PCI_VGA_IO_LO].mem);
vdev->bars[i].fd_offset = reg_info.offset;
vdev->bars[i].fd = vdev->fd;
vdev->bars[i].nr = i;
+ QLIST_INIT(&vdev->bars[i].quirks);
}
reg_info.index = VFIO_PCI_ROM_REGION_INDEX;
vdev->vga.region[QEMU_PCI_VGA_MEM].offset = QEMU_PCI_VGA_MEM_BASE;
vdev->vga.region[QEMU_PCI_VGA_MEM].nr = QEMU_PCI_VGA_MEM;
+ QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_MEM].quirks);
vdev->vga.region[QEMU_PCI_VGA_IO_LO].offset = QEMU_PCI_VGA_IO_LO_BASE;
vdev->vga.region[QEMU_PCI_VGA_IO_LO].nr = QEMU_PCI_VGA_IO_LO;
+ QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_IO_LO].quirks);
vdev->vga.region[QEMU_PCI_VGA_IO_HI].offset = QEMU_PCI_VGA_IO_HI_BASE;
vdev->vga.region[QEMU_PCI_VGA_IO_HI].nr = QEMU_PCI_VGA_IO_HI;
+ QLIST_INIT(&vdev->vga.region[QEMU_PCI_VGA_IO_HI].quirks);
vdev->has_vga = true;
}