drm/i915/ringbuffer: Delay after invalidating gen6+ xcs

During stress testing of full-ppgtt (on Baytrail at least), we found
that the invalidation around a context/mm switch was insufficient (writes
would go astray). Adding a second MI_FLUSH_DW barrier prevents this, but
it is unclear as to whether this is merely a delaying tactic or if it is
truly serialising with the TLB invalidation. Either way, it is
empirically required.

v2: Avoid the loop for readability;

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107715
References: https://bugs.freedesktop.org/show_bug.cgi?id=107759
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180830161042.29193-1-chris@chris-wilson.co.uk

diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index d40f55a..4443267 100644 (file)
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1944,7 +1944,7 @@ static void gen6_bsd_submit_request(struct i915_request *request)
        intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
 }
 
-static int gen6_bsd_ring_flush(struct i915_request *rq, u32 mode)
+static int emit_mi_flush_dw(struct i915_request *rq, u32 flags)
 {
        u32 cmd, *cs;
 
@@ -1954,7 +1954,8 @@ static int gen6_bsd_ring_flush(struct i915_request *rq, u32 mode)
 
        cmd = MI_FLUSH_DW;
 
-       /* We always require a command barrier so that subsequent
+       /*
+        * We always require a command barrier so that subsequent
         * commands, such as breadcrumb interrupts, are strictly ordered
         * wrt the contents of the write cache being flushed to memory
         * (and thus being coherent from the CPU).
@@ -1962,22 +1963,49 @@ static int gen6_bsd_ring_flush(struct i915_request *rq, u32 mode)
        cmd |= MI_FLUSH_DW_STORE_INDEX | MI_FLUSH_DW_OP_STOREDW;
 
        /*
-        * Bspec vol 1c.5 - video engine command streamer:
+        * Bspec vol 1c.3 - blitter engine command streamer:
         * "If ENABLED, all TLBs will be invalidated once the flush
         * operation is complete. This bit is only valid when the
         * Post-Sync Operation field is a value of 1h or 3h."
         */
-       if (mode & EMIT_INVALIDATE)
-               cmd |= MI_INVALIDATE_TLB | MI_INVALIDATE_BSD;
+       cmd |= flags;
 
        *cs++ = cmd;
        *cs++ = I915_GEM_HWS_SCRATCH_ADDR | MI_FLUSH_DW_USE_GTT;
        *cs++ = 0;
        *cs++ = MI_NOOP;
+
        intel_ring_advance(rq, cs);
+
        return 0;
 }
 
+static int gen6_flush_dw(struct i915_request *rq, u32 mode, u32 invflags)
+{
+       int err;
+
+       /*
+        * Not only do we need a full barrier (post-sync write) after
+        * invalidating the TLBs, but we need to wait a little bit
+        * longer. Whether this is merely delaying us, or the
+        * subsequent flush is a key part of serialising with the
+        * post-sync op, this extra pass appears vital before a
+        * mm switch!
+        */
+       if (mode & EMIT_INVALIDATE) {
+               err = emit_mi_flush_dw(rq, invflags);
+               if (err)
+                       return err;
+       }
+
+       return emit_mi_flush_dw(rq, 0);
+}
+
+static int gen6_bsd_ring_flush(struct i915_request *rq, u32 mode)
+{
+       return gen6_flush_dw(rq, mode, MI_INVALIDATE_TLB | MI_INVALIDATE_BSD);
+}
+
 static int
 hsw_emit_bb_start(struct i915_request *rq,
                  u64 offset, u32 len,
@@ -2022,36 +2050,7 @@ gen6_emit_bb_start(struct i915_request *rq,
 
 static int gen6_ring_flush(struct i915_request *rq, u32 mode)
 {
-       u32 cmd, *cs;
-
-       cs = intel_ring_begin(rq, 4);
-       if (IS_ERR(cs))
-               return PTR_ERR(cs);
-
-       cmd = MI_FLUSH_DW;
-
-       /* We always require a command barrier so that subsequent
-        * commands, such as breadcrumb interrupts, are strictly ordered
-        * wrt the contents of the write cache being flushed to memory
-        * (and thus being coherent from the CPU).
-        */
-       cmd |= MI_FLUSH_DW_STORE_INDEX | MI_FLUSH_DW_OP_STOREDW;
-
-       /*
-        * Bspec vol 1c.3 - blitter engine command streamer:
-        * "If ENABLED, all TLBs will be invalidated once the flush
-        * operation is complete. This bit is only valid when the
-        * Post-Sync Operation field is a value of 1h or 3h."
-        */
-       if (mode & EMIT_INVALIDATE)
-               cmd |= MI_INVALIDATE_TLB;
-       *cs++ = cmd;
-       *cs++ = I915_GEM_HWS_SCRATCH_ADDR | MI_FLUSH_DW_USE_GTT;
-       *cs++ = 0;
-       *cs++ = MI_NOOP;
-       intel_ring_advance(rq, cs);
-
-       return 0;
+       return gen6_flush_dw(rq, mode, MI_INVALIDATE_TLB);
 }
 
 static void intel_ring_init_semaphores(struct drm_i915_private *dev_priv,