#include "sysemu/dma.h"
#include "hw/ide/internal.h"
#include "hw/ide/pci.h"
-#include "hw/ide/ahci.h"
+#include "hw/ide/ahci_internal.h"
#define DEBUG_AHCI 0
--- /dev/null
+/*
+ * QEMU AHCI Emulation
+ *
+ * Copyright (c) 2010 qiaochong@loongson.cn
+ * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com>
+ * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
+ * Copyright (c) 2010 Alexander Graf <agraf@suse.de>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef HW_IDE_AHCI_INTERNAL_H
+#define HW_IDE_AHCI_INTERNAL_H
+
+#include "hw/ide/ahci.h"
+#include "hw/sysbus.h"
+
+#define AHCI_MEM_BAR_SIZE 0x1000
+#define AHCI_MAX_PORTS 32
+#define AHCI_MAX_SG 168 /* hardware max is 64K */
+#define AHCI_DMA_BOUNDARY 0xffffffff
+#define AHCI_USE_CLUSTERING 0
+#define AHCI_MAX_CMDS 32
+#define AHCI_CMD_SZ 32
+#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ)
+#define AHCI_RX_FIS_SZ 256
+#define AHCI_CMD_TBL_CDB 0x40
+#define AHCI_CMD_TBL_HDR_SZ 0x80
+#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
+#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
+#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
+ AHCI_RX_FIS_SZ)
+
+#define AHCI_IRQ_ON_SG (1U << 31)
+#define AHCI_CMD_ATAPI (1 << 5)
+#define AHCI_CMD_WRITE (1 << 6)
+#define AHCI_CMD_PREFETCH (1 << 7)
+#define AHCI_CMD_RESET (1 << 8)
+#define AHCI_CMD_CLR_BUSY (1 << 10)
+
+#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
+#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */
+#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */
+
+/* global controller registers */
+#define HOST_CAP 0x00 /* host capabilities */
+#define HOST_CTL 0x04 /* global host control */
+#define HOST_IRQ_STAT 0x08 /* interrupt status */
+#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
+#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
+
+/* HOST_CTL bits */
+#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */
+#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */
+#define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */
+
+/* HOST_CAP bits */
+#define HOST_CAP_SSC (1 << 14) /* Slumber capable */
+#define HOST_CAP_AHCI (1 << 18) /* AHCI only */
+#define HOST_CAP_CLO (1 << 24) /* Command List Override support */
+#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */
+#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
+#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */
+
+/* registers for each SATA port */
+#define PORT_LST_ADDR 0x00 /* command list DMA addr */
+#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
+#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
+#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
+#define PORT_IRQ_STAT 0x10 /* interrupt status */
+#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
+#define PORT_CMD 0x18 /* port command */
+#define PORT_TFDATA 0x20 /* taskfile data */
+#define PORT_SIG 0x24 /* device TF signature */
+#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
+#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
+#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
+#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
+#define PORT_CMD_ISSUE 0x38 /* command issue */
+#define PORT_RESERVED 0x3c /* reserved */
+
+/* PORT_IRQ_{STAT,MASK} bits */
+#define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */
+#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
+#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
+#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
+#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
+#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
+#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
+#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
+
+#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
+#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
+#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
+#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
+#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
+#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
+#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
+#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
+#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
+
+#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \
+ PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \
+ PORT_IRQ_UNK_FIS)
+#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \
+ PORT_IRQ_HBUS_DATA_ERR)
+#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \
+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \
+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
+
+/* PORT_CMD bits */
+#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
+#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
+#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
+#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
+#define PORT_CMD_CLO (1 << 3) /* Command list override */
+#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
+#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
+#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
+
+#define PORT_CMD_ICC_MASK (0xfU << 28) /* i/f ICC state mask */
+#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
+#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
+#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
+
+#define PORT_CMD_RO_MASK 0x007dffe0 /* Which CMD bits are read only? */
+
+/* ap->flags bits */
+#define AHCI_FLAG_NO_NCQ (1 << 24)
+#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */
+#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */
+#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */
+#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */
+
+#define ATA_SRST (1 << 2) /* software reset */
+
+#define STATE_RUN 0
+#define STATE_RESET 1
+
+#define SATA_SCR_SSTATUS_DET_NODEV 0x0
+#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
+
+#define SATA_SCR_SSTATUS_SPD_NODEV 0x00
+#define SATA_SCR_SSTATUS_SPD_GEN1 0x10
+
+#define SATA_SCR_SSTATUS_IPM_NODEV 0x000
+#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100
+
+#define AHCI_SCR_SCTL_DET 0xf
+
+#define SATA_FIS_TYPE_REGISTER_H2D 0x27
+#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
+#define SATA_FIS_TYPE_REGISTER_D2H 0x34
+#define SATA_FIS_TYPE_PIO_SETUP 0x5f
+#define SATA_FIS_TYPE_SDB 0xA1
+
+#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f
+#define AHCI_CMD_HDR_PRDT_LEN 16
+
+#define SATA_SIGNATURE_CDROM 0xeb140101
+#define SATA_SIGNATURE_DISK 0x00000101
+
+#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
+ /* Shouldn't this be 0x2c? */
+
+#define AHCI_PORT_REGS_START_ADDR 0x100
+#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f
+#define AHCI_PORT_ADDR_OFFSET_LEN 0x80
+
+#define AHCI_NUM_COMMAND_SLOTS 31
+#define AHCI_SUPPORTED_SPEED 20
+#define AHCI_SUPPORTED_SPEED_GEN1 1
+#define AHCI_VERSION_1_0 0x10000
+
+#define AHCI_PROGMODE_MAJOR_REV_1 1
+
+#define AHCI_COMMAND_TABLE_ACMD 0x40
+
+#define AHCI_PRDT_SIZE_MASK 0x3fffff
+
+#define IDE_FEATURE_DMA 1
+
+#define READ_FPDMA_QUEUED 0x60
+#define WRITE_FPDMA_QUEUED 0x61
+#define NCQ_NON_DATA 0x63
+#define RECEIVE_FPDMA_QUEUED 0x65
+#define SEND_FPDMA_QUEUED 0x64
+
+#define NCQ_FIS_FUA_MASK 0x80
+#define NCQ_FIS_RARC_MASK 0x01
+
+#define RES_FIS_DSFIS 0x00
+#define RES_FIS_PSFIS 0x20
+#define RES_FIS_RFIS 0x40
+#define RES_FIS_SDBFIS 0x58
+#define RES_FIS_UFIS 0x60
+
+#define SATA_CAP_SIZE 0x8
+#define SATA_CAP_REV 0x2
+#define SATA_CAP_BAR 0x4
+
+typedef struct AHCIPortRegs {
+ uint32_t lst_addr;
+ uint32_t lst_addr_hi;
+ uint32_t fis_addr;
+ uint32_t fis_addr_hi;
+ uint32_t irq_stat;
+ uint32_t irq_mask;
+ uint32_t cmd;
+ uint32_t unused0;
+ uint32_t tfdata;
+ uint32_t sig;
+ uint32_t scr_stat;
+ uint32_t scr_ctl;
+ uint32_t scr_err;
+ uint32_t scr_act;
+ uint32_t cmd_issue;
+ uint32_t reserved;
+} AHCIPortRegs;
+
+typedef struct AHCICmdHdr {
+ uint16_t opts;
+ uint16_t prdtl;
+ uint32_t status;
+ uint64_t tbl_addr;
+ uint32_t reserved[4];
+} QEMU_PACKED AHCICmdHdr;
+
+typedef struct AHCI_SG {
+ uint64_t addr;
+ uint32_t reserved;
+ uint32_t flags_size;
+} QEMU_PACKED AHCI_SG;
+
+typedef struct NCQTransferState {
+ AHCIDevice *drive;
+ BlockAIOCB *aiocb;
+ AHCICmdHdr *cmdh;
+ QEMUSGList sglist;
+ BlockAcctCookie acct;
+ uint32_t sector_count;
+ uint64_t lba;
+ uint8_t tag;
+ uint8_t cmd;
+ uint8_t slot;
+ bool used;
+ bool halt;
+} NCQTransferState;
+
+struct AHCIDevice {
+ IDEDMA dma;
+ IDEBus port;
+ int port_no;
+ uint32_t port_state;
+ uint32_t finished;
+ AHCIPortRegs port_regs;
+ struct AHCIState *hba;
+ QEMUBH *check_bh;
+ uint8_t *lst;
+ uint8_t *res_fis;
+ bool done_atapi_packet;
+ int32_t busy_slot;
+ bool init_d2h_sent;
+ AHCICmdHdr *cur_cmd;
+ NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
+};
+
+struct AHCIPCIState {
+ /*< private >*/
+ PCIDevice parent_obj;
+ /*< public >*/
+
+ AHCIState ahci;
+};
+
+#define TYPE_ICH9_AHCI "ich9-ahci"
+
+#define ICH_AHCI(obj) \
+ OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
+
+extern const VMStateDescription vmstate_ahci;
+
+#define VMSTATE_AHCI(_field, _state) { \
+ .name = (stringify(_field)), \
+ .size = sizeof(AHCIState), \
+ .vmsd = &vmstate_ahci, \
+ .flags = VMS_STRUCT, \
+ .offset = vmstate_offset_value(_state, _field, AHCIState), \
+}
+
+/**
+ * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2),
+ * but some fields have been re-mapped and re-purposed, as seen in
+ * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED")
+ *
+ * cmd_fis[3], feature 7:0, becomes sector count 7:0.
+ * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit.
+ * cmd_fis[11], feature 15:8, becomes sector count 15:8.
+ * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0)
+ * cmd_fis[13], count 15:8, becomes the priority value (7:6)
+ * bytes 16-19 become an le32 "auxiliary" field.
+ */
+typedef struct NCQFrame {
+ uint8_t fis_type;
+ uint8_t c;
+ uint8_t command;
+ uint8_t sector_count_low; /* (feature 7:0) */
+ uint8_t lba0;
+ uint8_t lba1;
+ uint8_t lba2;
+ uint8_t fua; /* (device 7:0) */
+ uint8_t lba3;
+ uint8_t lba4;
+ uint8_t lba5;
+ uint8_t sector_count_high; /* (feature 15:8) */
+ uint8_t tag; /* (count 0:7) */
+ uint8_t prio; /* (count 15:8) */
+ uint8_t icc;
+ uint8_t control;
+ uint8_t aux0;
+ uint8_t aux1;
+ uint8_t aux2;
+ uint8_t aux3;
+} QEMU_PACKED NCQFrame;
+
+typedef struct SDBFIS {
+ uint8_t type;
+ uint8_t flags;
+ uint8_t status;
+ uint8_t error;
+ uint32_t payload;
+} QEMU_PACKED SDBFIS;
+
+void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
+void ahci_init(AHCIState *s, DeviceState *qdev);
+void ahci_uninit(AHCIState *s);
+
+void ahci_reset(AHCIState *s);
+
+#define TYPE_SYSBUS_AHCI "sysbus-ahci"
+#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
+
+#define TYPE_ALLWINNER_AHCI "allwinner-ahci"
+#define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \
+ TYPE_ALLWINNER_AHCI)
+
+#endif /* HW_IDE_AHCI_H */
#include "sysemu/block-backend.h"
#include "sysemu/dma.h"
#include "hw/ide/pci.h"
-#include "hw/ide/ahci.h"
+#include "hw/ide/ahci_internal.h"
#define ICH9_MSI_CAP_OFFSET 0x80
#define ICH9_SATA_CAP_OFFSET 0xA8
*
*/
-#ifndef HW_IDE_AHCI_INTERNAL_H
-#define HW_IDE_AHCI_INTERNAL_H
+#ifndef HW_IDE_AHCI_H
+#define HW_IDE_AHCI_H
-#include "hw/ide/ahci_public.h"
#include "hw/sysbus.h"
-#define AHCI_MEM_BAR_SIZE 0x1000
-#define AHCI_MAX_PORTS 32
-#define AHCI_MAX_SG 168 /* hardware max is 64K */
-#define AHCI_DMA_BOUNDARY 0xffffffff
-#define AHCI_USE_CLUSTERING 0
-#define AHCI_MAX_CMDS 32
-#define AHCI_CMD_SZ 32
-#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ)
-#define AHCI_RX_FIS_SZ 256
-#define AHCI_CMD_TBL_CDB 0x40
-#define AHCI_CMD_TBL_HDR_SZ 0x80
-#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
-#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
-#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
- AHCI_RX_FIS_SZ)
+typedef struct AHCIDevice AHCIDevice;
-#define AHCI_IRQ_ON_SG (1U << 31)
-#define AHCI_CMD_ATAPI (1 << 5)
-#define AHCI_CMD_WRITE (1 << 6)
-#define AHCI_CMD_PREFETCH (1 << 7)
-#define AHCI_CMD_RESET (1 << 8)
-#define AHCI_CMD_CLR_BUSY (1 << 10)
+typedef struct AHCIControlRegs {
+ uint32_t cap;
+ uint32_t ghc;
+ uint32_t irqstatus;
+ uint32_t impl;
+ uint32_t version;
+} AHCIControlRegs;
-#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
-#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */
-#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */
+typedef struct AHCIState {
+ DeviceState *container;
-/* global controller registers */
-#define HOST_CAP 0x00 /* host capabilities */
-#define HOST_CTL 0x04 /* global host control */
-#define HOST_IRQ_STAT 0x08 /* interrupt status */
-#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
-#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
+ AHCIDevice *dev;
+ AHCIControlRegs control_regs;
+ MemoryRegion mem;
+ MemoryRegion idp; /* Index-Data Pair I/O port space */
+ unsigned idp_offset; /* Offset of index in I/O port space */
+ uint32_t idp_index; /* Current IDP index */
+ int32_t ports;
+ qemu_irq irq;
+ AddressSpace *as;
+} AHCIState;
-/* HOST_CTL bits */
-#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */
-#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */
-#define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */
-
-/* HOST_CAP bits */
-#define HOST_CAP_SSC (1 << 14) /* Slumber capable */
-#define HOST_CAP_AHCI (1 << 18) /* AHCI only */
-#define HOST_CAP_CLO (1 << 24) /* Command List Override support */
-#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */
-#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
-#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */
-
-/* registers for each SATA port */
-#define PORT_LST_ADDR 0x00 /* command list DMA addr */
-#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
-#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
-#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
-#define PORT_IRQ_STAT 0x10 /* interrupt status */
-#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
-#define PORT_CMD 0x18 /* port command */
-#define PORT_TFDATA 0x20 /* taskfile data */
-#define PORT_SIG 0x24 /* device TF signature */
-#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
-#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
-#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
-#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
-#define PORT_CMD_ISSUE 0x38 /* command issue */
-#define PORT_RESERVED 0x3c /* reserved */
-
-/* PORT_IRQ_{STAT,MASK} bits */
-#define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */
-#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
-#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
-#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
-#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
-#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
-#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
-#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
-
-#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
-#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
-#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
-#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
-#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
-#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
-#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
-#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
-#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
-
-#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \
- PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \
- PORT_IRQ_UNK_FIS)
-#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \
- PORT_IRQ_HBUS_DATA_ERR)
-#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \
- PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \
- PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
-
-/* PORT_CMD bits */
-#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
-#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
-#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
-#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
-#define PORT_CMD_CLO (1 << 3) /* Command list override */
-#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
-#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
-#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
-
-#define PORT_CMD_ICC_MASK (0xfU << 28) /* i/f ICC state mask */
-#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
-#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
-#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
-
-#define PORT_CMD_RO_MASK 0x007dffe0 /* Which CMD bits are read only? */
-
-/* ap->flags bits */
-#define AHCI_FLAG_NO_NCQ (1 << 24)
-#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */
-#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */
-#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */
-#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */
-
-#define ATA_SRST (1 << 2) /* software reset */
-
-#define STATE_RUN 0
-#define STATE_RESET 1
-
-#define SATA_SCR_SSTATUS_DET_NODEV 0x0
-#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
-
-#define SATA_SCR_SSTATUS_SPD_NODEV 0x00
-#define SATA_SCR_SSTATUS_SPD_GEN1 0x10
-
-#define SATA_SCR_SSTATUS_IPM_NODEV 0x000
-#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100
-
-#define AHCI_SCR_SCTL_DET 0xf
-
-#define SATA_FIS_TYPE_REGISTER_H2D 0x27
-#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
-#define SATA_FIS_TYPE_REGISTER_D2H 0x34
-#define SATA_FIS_TYPE_PIO_SETUP 0x5f
-#define SATA_FIS_TYPE_SDB 0xA1
-
-#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f
-#define AHCI_CMD_HDR_PRDT_LEN 16
-
-#define SATA_SIGNATURE_CDROM 0xeb140101
-#define SATA_SIGNATURE_DISK 0x00000101
-
-#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
- /* Shouldn't this be 0x2c? */
-
-#define AHCI_PORT_REGS_START_ADDR 0x100
-#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f
-#define AHCI_PORT_ADDR_OFFSET_LEN 0x80
-
-#define AHCI_NUM_COMMAND_SLOTS 31
-#define AHCI_SUPPORTED_SPEED 20
-#define AHCI_SUPPORTED_SPEED_GEN1 1
-#define AHCI_VERSION_1_0 0x10000
-
-#define AHCI_PROGMODE_MAJOR_REV_1 1
-
-#define AHCI_COMMAND_TABLE_ACMD 0x40
-
-#define AHCI_PRDT_SIZE_MASK 0x3fffff
-
-#define IDE_FEATURE_DMA 1
-
-#define READ_FPDMA_QUEUED 0x60
-#define WRITE_FPDMA_QUEUED 0x61
-#define NCQ_NON_DATA 0x63
-#define RECEIVE_FPDMA_QUEUED 0x65
-#define SEND_FPDMA_QUEUED 0x64
-
-#define NCQ_FIS_FUA_MASK 0x80
-#define NCQ_FIS_RARC_MASK 0x01
-
-#define RES_FIS_DSFIS 0x00
-#define RES_FIS_PSFIS 0x20
-#define RES_FIS_RFIS 0x40
-#define RES_FIS_SDBFIS 0x58
-#define RES_FIS_UFIS 0x60
-
-#define SATA_CAP_SIZE 0x8
-#define SATA_CAP_REV 0x2
-#define SATA_CAP_BAR 0x4
-
-typedef struct AHCIPortRegs {
- uint32_t lst_addr;
- uint32_t lst_addr_hi;
- uint32_t fis_addr;
- uint32_t fis_addr_hi;
- uint32_t irq_stat;
- uint32_t irq_mask;
- uint32_t cmd;
- uint32_t unused0;
- uint32_t tfdata;
- uint32_t sig;
- uint32_t scr_stat;
- uint32_t scr_ctl;
- uint32_t scr_err;
- uint32_t scr_act;
- uint32_t cmd_issue;
- uint32_t reserved;
-} AHCIPortRegs;
-
-typedef struct AHCICmdHdr {
- uint16_t opts;
- uint16_t prdtl;
- uint32_t status;
- uint64_t tbl_addr;
- uint32_t reserved[4];
-} QEMU_PACKED AHCICmdHdr;
-
-typedef struct AHCI_SG {
- uint64_t addr;
- uint32_t reserved;
- uint32_t flags_size;
-} QEMU_PACKED AHCI_SG;
-
-typedef struct NCQTransferState {
- AHCIDevice *drive;
- BlockAIOCB *aiocb;
- AHCICmdHdr *cmdh;
- QEMUSGList sglist;
- BlockAcctCookie acct;
- uint32_t sector_count;
- uint64_t lba;
- uint8_t tag;
- uint8_t cmd;
- uint8_t slot;
- bool used;
- bool halt;
-} NCQTransferState;
-
-struct AHCIDevice {
- IDEDMA dma;
- IDEBus port;
- int port_no;
- uint32_t port_state;
- uint32_t finished;
- AHCIPortRegs port_regs;
- struct AHCIState *hba;
- QEMUBH *check_bh;
- uint8_t *lst;
- uint8_t *res_fis;
- bool done_atapi_packet;
- int32_t busy_slot;
- bool init_d2h_sent;
- AHCICmdHdr *cur_cmd;
- NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
-};
-
-struct AHCIPCIState {
- /*< private >*/
- PCIDevice parent_obj;
- /*< public >*/
-
- AHCIState ahci;
-};
+typedef struct AHCIPCIState AHCIPCIState;
#define TYPE_ICH9_AHCI "ich9-ahci"
#define ICH_AHCI(obj) \
OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
-extern const VMStateDescription vmstate_ahci;
-
-#define VMSTATE_AHCI(_field, _state) { \
- .name = (stringify(_field)), \
- .size = sizeof(AHCIState), \
- .vmsd = &vmstate_ahci, \
- .flags = VMS_STRUCT, \
- .offset = vmstate_offset_value(_state, _field, AHCIState), \
-}
-
-/**
- * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2),
- * but some fields have been re-mapped and re-purposed, as seen in
- * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED")
- *
- * cmd_fis[3], feature 7:0, becomes sector count 7:0.
- * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit.
- * cmd_fis[11], feature 15:8, becomes sector count 15:8.
- * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0)
- * cmd_fis[13], count 15:8, becomes the priority value (7:6)
- * bytes 16-19 become an le32 "auxiliary" field.
- */
-typedef struct NCQFrame {
- uint8_t fis_type;
- uint8_t c;
- uint8_t command;
- uint8_t sector_count_low; /* (feature 7:0) */
- uint8_t lba0;
- uint8_t lba1;
- uint8_t lba2;
- uint8_t fua; /* (device 7:0) */
- uint8_t lba3;
- uint8_t lba4;
- uint8_t lba5;
- uint8_t sector_count_high; /* (feature 15:8) */
- uint8_t tag; /* (count 0:7) */
- uint8_t prio; /* (count 15:8) */
- uint8_t icc;
- uint8_t control;
- uint8_t aux0;
- uint8_t aux1;
- uint8_t aux2;
- uint8_t aux3;
-} QEMU_PACKED NCQFrame;
-
-typedef struct SDBFIS {
- uint8_t type;
- uint8_t flags;
- uint8_t status;
- uint8_t error;
- uint32_t payload;
-} QEMU_PACKED SDBFIS;
-
-void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
-void ahci_init(AHCIState *s, DeviceState *qdev);
-void ahci_uninit(AHCIState *s);
-
-void ahci_reset(AHCIState *s);
+int32_t ahci_get_num_ports(PCIDevice *dev);
+void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd);
#define TYPE_SYSBUS_AHCI "sysbus-ahci"
#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
+typedef struct SysbusAHCIState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+ /*< public >*/
+
+ AHCIState ahci;
+ uint32_t num_ports;
+} SysbusAHCIState;
+
#define TYPE_ALLWINNER_AHCI "allwinner-ahci"
#define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \
TYPE_ALLWINNER_AHCI)
+#define ALLWINNER_AHCI_MMIO_OFF 0x80
+#define ALLWINNER_AHCI_MMIO_SIZE 0x80
+
+struct AllwinnerAHCIState {
+ /*< private >*/
+ SysbusAHCIState parent_obj;
+ /*< public >*/
+
+ MemoryRegion mmio;
+ uint32_t regs[ALLWINNER_AHCI_MMIO_SIZE/4];
+};
+
#endif /* HW_IDE_AHCI_H */
+++ /dev/null
-/*
- * QEMU AHCI Emulation
- *
- * Copyright (c) 2010 qiaochong@loongson.cn
- * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com>
- * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
- * Copyright (c) 2010 Alexander Graf <agraf@suse.de>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef HW_IDE_AHCI_H
-#define HW_IDE_AHCI_H
-
-#include "hw/sysbus.h"
-
-typedef struct AHCIDevice AHCIDevice;
-
-typedef struct AHCIControlRegs {
- uint32_t cap;
- uint32_t ghc;
- uint32_t irqstatus;
- uint32_t impl;
- uint32_t version;
-} AHCIControlRegs;
-
-typedef struct AHCIState {
- DeviceState *container;
-
- AHCIDevice *dev;
- AHCIControlRegs control_regs;
- MemoryRegion mem;
- MemoryRegion idp; /* Index-Data Pair I/O port space */
- unsigned idp_offset; /* Offset of index in I/O port space */
- uint32_t idp_index; /* Current IDP index */
- int32_t ports;
- qemu_irq irq;
- AddressSpace *as;
-} AHCIState;
-
-typedef struct AHCIPCIState AHCIPCIState;
-
-#define TYPE_ICH9_AHCI "ich9-ahci"
-
-#define ICH_AHCI(obj) \
- OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
-
-int32_t ahci_get_num_ports(PCIDevice *dev);
-void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd);
-
-#define TYPE_SYSBUS_AHCI "sysbus-ahci"
-#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
-
-typedef struct SysbusAHCIState {
- /*< private >*/
- SysBusDevice parent_obj;
- /*< public >*/
-
- AHCIState ahci;
- uint32_t num_ports;
-} SysbusAHCIState;
-
-#define TYPE_ALLWINNER_AHCI "allwinner-ahci"
-#define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \
- TYPE_ALLWINNER_AHCI)
-
-#define ALLWINNER_AHCI_MMIO_OFF 0x80
-#define ALLWINNER_AHCI_MMIO_SIZE 0x80
-
-struct AllwinnerAHCIState {
- /*< private >*/
- SysbusAHCIState parent_obj;
- /*< public >*/
-
- MemoryRegion mmio;
- uint32_t regs[ALLWINNER_AHCI_MMIO_SIZE/4];
-};
-
-#endif /* HW_IDE_AHCI_H */