powerpc: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 602eea7..1888636 100644 (file)
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -286,12 +286,10 @@ config ARCH_MAY_HAVE_PC_FDC
 
 config PPC_UDBG_16550
        bool
-       default n
 
 config GENERIC_TBSYNC
        bool
        default y if PPC32 && SMP
-       default n
 
 config AUDIT_ARCH
        bool
@@ -310,13 +308,11 @@ config EPAPR_BOOT
        bool
        help
          Used to allow a board to specify it wants an ePAPR compliant wrapper.
-       default n
 
 config DEFAULT_UIMAGE
        bool
        help
          Used to allow a board to specify it wants a uImage built by default
-       default n
 
 config ARCH_HIBERNATION_POSSIBLE
        bool
@@ -330,11 +326,9 @@ config ARCH_SUSPEND_POSSIBLE
 
 config PPC_DCR_NATIVE
        bool
-       default n
 
 config PPC_DCR_MMIO
        bool
-       default n
 
 config PPC_DCR
        bool
@@ -345,7 +339,6 @@ config PPC_OF_PLATFORM_PCI
        bool
        depends on PCI
        depends on PPC64 # not supported on 32 bits yet
-       default n
 
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
        depends on PPC32 || PPC_BOOK3S_64
@@ -448,14 +441,12 @@ config PPC_TRANSACTIONAL_MEM
        depends on SMP
        select ALTIVEC
        select VSX
-       default n
        ---help---
          Support user-mode Transactional Memory on POWERPC.
 
 config LD_HEAD_STUB_CATCH
        bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
        depends on PPC64
-       default n
        help
          Very large kernels can cause linker branch stubs to be generated by
          code in head_64.S, which moves the head text sections out of their
@@ -558,7 +549,6 @@ config RELOCATABLE
 config RELOCATABLE_TEST
        bool "Test relocatable kernel"
        depends on (PPC64 && RELOCATABLE)
-       default n
        help
          This runs the relocatable kernel at the address it was initially
          loaded at, which tends to be non-zero and therefore test the
@@ -770,7 +760,6 @@ config PPC_SUBPAGE_PROT
 
 config PPC_COPRO_BASE
        bool
-       default n
 
 config SCHED_SMT
        bool "SMT (Hyperthreading) scheduler support"
@@ -893,7 +882,6 @@ config PPC_INDIRECT_PCI
        bool
        depends on PCI
        default y if 40x || 44x
-       default n
 
 config EISA
        bool
@@ -990,7 +978,6 @@ source "drivers/pcmcia/Kconfig"
 
 config HAS_RAPIDIO
        bool
-       default n
 
 config RAPIDIO
        tristate "RapidIO support"
@@ -1013,7 +1000,6 @@ endmenu
 
 config NONSTATIC_KERNEL
        bool
-       default n
 
 menu "Advanced setup"
        depends on PPC32

diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index fd63cd9..f4961fb 100644 (file)
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -2,7 +2,6 @@
 
 config PPC_DISABLE_WERROR
        bool "Don't build arch/powerpc code with -Werror"
-       default n
        help
          This option tells the compiler NOT to build the code under
          arch/powerpc with the -Werror flag (which means warnings
@@ -56,7 +55,6 @@ config PPC_EMULATED_STATS
 config CODE_PATCHING_SELFTEST
        bool "Run self-tests of the code-patching code"
        depends on DEBUG_KERNEL
-       default n
 
 config JUMP_LABEL_FEATURE_CHECKS
        bool "Enable use of jump label for cpu/mmu_has_feature()"
@@ -70,7 +68,6 @@ config JUMP_LABEL_FEATURE_CHECKS
 config JUMP_LABEL_FEATURE_CHECK_DEBUG
        bool "Do extra check on feature fixup calls"
        depends on DEBUG_KERNEL && JUMP_LABEL_FEATURE_CHECKS
-       default n
        help
          This tries to catch incorrect usage of cpu_has_feature() and
          mmu_has_feature() in the code.
@@ -80,16 +77,13 @@ config JUMP_LABEL_FEATURE_CHECK_DEBUG
 config FTR_FIXUP_SELFTEST
        bool "Run self-tests of the feature-fixup code"
        depends on DEBUG_KERNEL
-       default n
 
 config MSI_BITMAP_SELFTEST
        bool "Run self-tests of the MSI bitmap code"
        depends on DEBUG_KERNEL
-       default n
 
 config PPC_IRQ_SOFT_MASK_DEBUG
        bool "Include extra checks for powerpc irq soft masking"
-       default n
 
 config XMON
        bool "Include xmon kernel debugger"

diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 60254a3..2a9d662 100644 (file)
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -2,7 +2,6 @@
 config ACADIA
        bool "Acadia"
        depends on 40x
-       default n
        select PPC40x_SIMPLE
        select 405EZ
        help
@@ -11,7 +10,6 @@ config ACADIA
 config EP405
        bool "EP405/EP405PC"
        depends on 40x
-       default n
        select 405GP
        select PCI
        help
@@ -20,7 +18,6 @@ config EP405
 config HOTFOOT
         bool "Hotfoot"
        depends on 40x
-       default n
        select PPC40x_SIMPLE
        select PCI
         help
@@ -29,7 +26,6 @@ config HOTFOOT
 config KILAUEA
        bool "Kilauea"
        depends on 40x
-       default n
        select 405EX
        select PPC40x_SIMPLE
        select PPC4xx_PCI_EXPRESS
@@ -41,7 +37,6 @@ config KILAUEA
 config MAKALU
        bool "Makalu"
        depends on 40x
-       default n
        select 405EX
        select PCI
        select PPC4xx_PCI_EXPRESS
@@ -62,7 +57,6 @@ config WALNUT
 config XILINX_VIRTEX_GENERIC_BOARD
        bool "Generic Xilinx Virtex board"
        depends on 40x
-       default n
        select XILINX_VIRTEX_II_PRO
        select XILINX_VIRTEX_4_FX
        select XILINX_INTC
@@ -80,7 +74,6 @@ config XILINX_VIRTEX_GENERIC_BOARD
 config OBS600
        bool "OpenBlockS 600"
        depends on 40x
-       default n
        select 405EX
        select PPC40x_SIMPLE
        help
@@ -90,7 +83,6 @@ config OBS600
 config PPC40x_SIMPLE
        bool "Simple PowerPC 40x board support"
        depends on 40x
-       default n
        help
          This option enables the simple PowerPC 40x platform support.
 
@@ -156,7 +148,6 @@ config IBM405_ERR51
 config APM8018X
        bool "APM8018X"
        depends on 40x
-       default n
        select PPC40x_SIMPLE
        help
          This option enables support for the AppliedMicro APM8018X evaluation

diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index a601142..f024efd 100644 (file)
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -2,7 +2,6 @@
 config PPC_47x
        bool "Support for 47x variant"
        depends on 44x
-       default n
        select MPIC
        help
          This option enables support for the 47x family of processors and is
@@ -11,7 +10,6 @@ config PPC_47x
 config BAMBOO
        bool "Bamboo"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 440EP
        select PCI
@@ -21,7 +19,6 @@ config BAMBOO
 config BLUESTONE
        bool "Bluestone"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select APM821xx
        select PCI_MSI
@@ -44,7 +41,6 @@ config EBONY
 config SAM440EP
         bool "Sam440ep"
        depends on 44x
-        default n
         select 440EP
         select PCI
         help
@@ -53,7 +49,6 @@ config SAM440EP
 config SEQUOIA
        bool "Sequoia"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 440EPX
        help
@@ -62,7 +57,6 @@ config SEQUOIA
 config TAISHAN
        bool "Taishan"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 440GX
        select PCI
@@ -73,7 +67,6 @@ config TAISHAN
 config KATMAI
        bool "Katmai"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 440SPe
        select PCI
@@ -86,7 +79,6 @@ config KATMAI
 config RAINIER
        bool "Rainier"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 440GRX
        select PCI
@@ -96,7 +88,6 @@ config RAINIER
 config WARP
        bool "PIKA Warp"
        depends on 44x
-       default n
        select 440EP
        help
          This option enables support for the PIKA Warp(tm) Appliance. The Warp
@@ -109,7 +100,6 @@ config WARP
 config ARCHES
        bool "Arches"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 460EX # Odd since it uses 460GT but the effects are the same
        select PCI
@@ -120,7 +110,6 @@ config ARCHES
 config CANYONLANDS
        bool "Canyonlands"
        depends on 44x
-       default n
        select 460EX
        select PCI
        select PPC4xx_PCI_EXPRESS
@@ -134,7 +123,6 @@ config CANYONLANDS
 config GLACIER
        bool "Glacier"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 460EX # Odd since it uses 460GT but the effects are the same
        select PCI
@@ -147,7 +135,6 @@ config GLACIER
 config REDWOOD
        bool "Redwood"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 460SX
        select PCI
@@ -160,7 +147,6 @@ config REDWOOD
 config EIGER
        bool "Eiger"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 460SX
        select PCI
@@ -172,7 +158,6 @@ config EIGER
 config YOSEMITE
        bool "Yosemite"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 440EP
        select PCI
@@ -182,7 +167,6 @@ config YOSEMITE
 config ISS4xx
        bool "ISS 4xx Simulator"
        depends on (44x || 40x)
-       default n
        select 405GP if 40x
        select 440GP if 44x && !PPC_47x
        select PPC_FPU
@@ -193,7 +177,6 @@ config ISS4xx
 config CURRITUCK
        bool "IBM Currituck (476fpe) Support"
        depends on PPC_47x
-       default n
        select SWIOTLB
        select 476FPE
        select PPC4xx_PCI_EXPRESS
@@ -203,7 +186,6 @@ config CURRITUCK
 config FSP2
        bool "IBM FSP2 (476fpe) Support"
        depends on PPC_47x
-       default n
        select 476FPE
        select IBM_EMAC_EMAC4 if IBM_EMAC
        select IBM_EMAC_RGMII if IBM_EMAC
@@ -215,7 +197,6 @@ config FSP2
 config AKEBONO
        bool "IBM Akebono (476gtr) Support"
        depends on PPC_47x
-       default n
        select SWIOTLB
        select 476FPE
        select PPC4xx_PCI_EXPRESS
@@ -241,7 +222,6 @@ config AKEBONO
 config ICON
        bool "Icon"
        depends on 44x
-       default n
        select PPC44x_SIMPLE
        select 440SPe
        select PCI
@@ -252,7 +232,6 @@ config ICON
 config XILINX_VIRTEX440_GENERIC_BOARD
        bool "Generic Xilinx Virtex 5 FXT board support"
        depends on 44x
-       default n
        select XILINX_VIRTEX_5_FXT
        select XILINX_INTC
        help
@@ -280,7 +259,6 @@ config XILINX_ML510
 config PPC44x_SIMPLE
        bool "Simple PowerPC 44x board support"
        depends on 44x
-       default n
        help
          This option enables the simple PowerPC 44x platform support.
 

diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 6e04099..1947a88 100644 (file)
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -51,7 +51,6 @@ endif
 
 config PQ2ADS
        bool
-       default n
 
 config 8260
        bool

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 14ef17e..260a56b 100644 (file)
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -23,7 +23,6 @@ source "arch/powerpc/platforms/amigaone/Kconfig"
 
 config KVM_GUEST
        bool "KVM Guest support"
-       default n
        select EPAPR_PARAVIRT
        ---help---
          This option enables various optimizations for running under the KVM
@@ -34,7 +33,6 @@ config KVM_GUEST
 
 config EPAPR_PARAVIRT
        bool "ePAPR para-virtualization support"
-       default n
        help
          Enables ePAPR para-virtualization support for guests.
 
@@ -74,7 +72,6 @@ config PPC_DT_CPU_FTRS
 config UDBG_RTAS_CONSOLE
        bool "RTAS based debug console"
        depends on PPC_RTAS
-       default n
 
 config PPC_SMP_MUXED_IPI
        bool
@@ -86,16 +83,13 @@ config PPC_SMP_MUXED_IPI
 
 config IPIC
        bool
-       default n
 
 config MPIC
        bool
-       default n
 
 config MPIC_TIMER
        bool "MPIC Global Timer"
        depends on MPIC && FSL_SOC
-       default n
        help
          The MPIC global timer is a hardware timer inside the
          Freescale PIC complying with OpenPIC standard. When the
@@ -107,7 +101,6 @@ config MPIC_TIMER
 config FSL_MPIC_TIMER_WAKEUP
        tristate "Freescale MPIC global timer wakeup driver"
        depends on FSL_SOC &&  MPIC_TIMER && PM
-       default n
        help
          The driver provides a way to wake up the system by MPIC
          timer.
@@ -115,43 +108,35 @@ config FSL_MPIC_TIMER_WAKEUP
 
 config PPC_EPAPR_HV_PIC
        bool
-       default n
        select EPAPR_PARAVIRT
 
 config MPIC_WEIRD
        bool
-       default n
 
 config MPIC_MSGR
        bool "MPIC message register support"
        depends on MPIC
-       default n
        help
          Enables support for the MPIC message registers.  These
          registers are used for inter-processor communication.
 
 config PPC_I8259
        bool
-       default n
 
 config U3_DART
        bool
        depends on PPC64
-       default n
 
 config PPC_RTAS
        bool
-       default n
 
 config RTAS_ERROR_LOGGING
        bool
        depends on PPC_RTAS
-       default n
 
 config PPC_RTAS_DAEMON
        bool
        depends on PPC_RTAS
-       default n
 
 config RTAS_PROC
        bool "Proc interface to RTAS"
@@ -164,11 +149,9 @@ config RTAS_FLASH
 
 config MMIO_NVRAM
        bool
-       default n
 
 config MPIC_U3_HT_IRQS
        bool
-       default n
 
 config MPIC_BROKEN_REGREAD
        bool
@@ -187,15 +170,12 @@ config EEH
 
 config PPC_MPC106
        bool
-       default n
 
 config PPC_970_NAP
        bool
-       default n
 
 config PPC_P7_NAP
        bool
-       default n
 
 config PPC_INDIRECT_PIO
        bool
@@ -295,7 +275,6 @@ config CPM2
 
 config FSL_ULI1575
        bool
-       default n
        select GENERIC_ISA_DMA
        help
          Supports for the ULI1575 PCIe south bridge that exists on some

diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 495db17..f4e2c57 100644 (file)
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 config PPC64
        bool "64-bit kernel"
-       default n
        select ZLIB_DEFLATE
        help
          This option selects whether a 32-bit or a 64-bit kernel
@@ -369,7 +368,6 @@ config PPC_MM_SLICES
        bool
        default y if PPC_BOOK3S_64
        default y if PPC_8xx && HUGETLB_PAGE
-       default n
 
 config PPC_HAVE_PMU_SUPPORT
        bool
@@ -383,7 +381,6 @@ config PPC_PERF_CTRS
 config FORCE_SMP
        # Allow platforms to force SMP=y by selecting this
        bool
-       default n
        select SMP
 
 config SMP
@@ -424,7 +421,6 @@ config CHECK_CACHE_COHERENCY
 
 config PPC_DOORBELL
        bool
-       default n
 
 endmenu
 

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 9f5958f..4b2f114 100644 (file)
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 config PPC_CELL
        bool
-       default n
 
 config PPC_CELL_COMMON
        bool
@@ -22,7 +21,6 @@ config PPC_CELL_NATIVE
        select IBM_EMAC_RGMII if IBM_EMAC
        select IBM_EMAC_ZMII if IBM_EMAC #test only
        select IBM_EMAC_TAH if IBM_EMAC  #test only
-       default n
 
 config PPC_IBM_CELL_BLADE
        bool "IBM Cell Blade"
@@ -54,7 +52,6 @@ config SPU_FS
 
 config SPU_BASE
        bool
-       default n
        select PPC_COPRO_BASE
 
 config CBE_RAS

diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig
index 376d0be..2601fac 100644 (file)
--- a/arch/powerpc/platforms/maple/Kconfig
+++ b/arch/powerpc/platforms/maple/Kconfig
@@ -13,7 +13,6 @@ config PPC_MAPLE
        select PPC_RTAS
        select MMIO_NVRAM
        select ATA_NONSTANDARD if ATA
-       default n
        help
           This option enables support for the Maple 970FX Evaluation Board.
          For more information, refer to <http://www.970eval.com>

diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index d458a79..98e3bc2 100644 (file)
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -2,7 +2,6 @@
 config PPC_PASEMI
        depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
        bool "PA Semi SoC-based platforms"
-       default n
        select MPIC
        select PCI
        select PPC_UDBG_16550

diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 028ac94..99083fe 100644 (file)
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -30,7 +30,6 @@ config OPAL_PRD
 config PPC_MEMTRACE
        bool "Enable removal of RAM from kernel mappings for tracing"
        depends on PPC_POWERNV && MEMORY_HOTREMOVE
-       default n
        help
          Enabling this option allows for the removal of memory (RAM)
          from the kernel mappings to be used for hardware tracing.

diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 6f75255..24864b8 100644 (file)
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -49,7 +49,6 @@ config PS3_HTAB_SIZE
 config PS3_DYNAMIC_DMA
        depends on PPC_PS3
        bool "PS3 Platform dynamic DMA page table management"
-       default n
        help
          This option will enable kernel support to take advantage of the
          per device dynamic DMA page table management provided by the Cell
@@ -89,7 +88,6 @@ config PS3_SYS_MANAGER
 config PS3_REPOSITORY_WRITE
        bool "PS3 Repository write support" if PS3_ADVANCED
        depends on PPC_PS3
-       default n
        help
          Enables support for writing to the PS3 System Repository.
 

diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 0c698fd..39032d9 100644 (file)
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -28,7 +28,6 @@ config PPC_PSERIES
 config PPC_SPLPAR
        depends on PPC_PSERIES
        bool "Support for shared-processor logical partitions"
-       default n
        help
          Enabling this option will make the kernel run more efficiently
          on logically-partitioned pSeries systems which use shared
@@ -99,7 +98,6 @@ config PPC_SMLPAR
        bool "Support for shared-memory logical partitions"
        depends on PPC_PSERIES
        select LPARCFG
-       default n
        help
          Select this option to enable shared memory partition support.
          With this option a system running in an LPAR can be given more

diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index bcef2ac..e0dbec7 100644 (file)
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -6,19 +6,16 @@
 config PPC4xx_PCI_EXPRESS
        bool
        depends on PCI && 4xx
-       default n
 
 config PPC4xx_HSTA_MSI
        bool
        depends on PCI_MSI
        depends on PCI && 4xx
-       default n
 
 config PPC4xx_MSI
        bool
        depends on PCI_MSI
        depends on PCI && 4xx
-       default n
 
 config PPC_MSI_BITMAP
        bool
@@ -37,11 +34,9 @@ config PPC_SCOM
 config SCOM_DEBUGFS
        bool "Expose SCOM controllers via debugfs"
        depends on PPC_SCOM && DEBUG_FS
-       default n
 
 config GE_FPGA
        bool
-       default n
 
 config FSL_CORENET_RCPM
        bool

diff --git a/arch/powerpc/sysdev/xive/Kconfig b/arch/powerpc/sysdev/xive/Kconfig
index 70ee976..785c292 100644 (file)
--- a/arch/powerpc/sysdev/xive/Kconfig
+++ b/arch/powerpc/sysdev/xive/Kconfig
@@ -1,17 +1,14 @@
 # SPDX-License-Identifier: GPL-2.0
 config PPC_XIVE
        bool
-       default n
        select PPC_SMP_MUXED_IPI
        select HARDIRQS_SW_RESEND
 
 config PPC_XIVE_NATIVE
        bool
-       default n
        select PPC_XIVE
        depends on PPC_POWERNV
 
 config PPC_XIVE_SPAPR
        bool
-       default n
        select PPC_XIVE