/*
libparted - a library for manipulating disk partitions
- Copyright (C) 1999, 2000, 2001, 2002, 2003, 2005, 2007
+ Copyright (C) 1999, 2000, 2001, 2002, 2003, 2005, 2007, 2008
Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
#include <parted/debug.h>
#include "architecture.h"
+#include "intprops.h"
#if ENABLE_NLS
# include <libintl.h>
return 1;
}
+static PedSector
+_partition_max_start (char const *label_type)
+{
+ /* List partition table names (a la disk->type->name) for which
+ the partition length, in sectors, must fit in 32 bytes. */
+ static char const *const max_32[] = {"msdos", "dvh"};
+ unsigned int i;
+
+ for (i = 0; i < sizeof max_32 / sizeof *max_32; i++)
+ if (strcmp (label_type, max_32[i]) == 0)
+ return UINT32_MAX;
+
+ return TYPE_MAXIMUM (PedSector);
+}
+
+static PedSector
+_partition_max_len (char const *label_type)
+{
+ /* NOTE: for now, they happen to be the same, so don't
+ duplicate needlessly. Of course, if there's some format
+ with different length and starting sector limits, then
+ these functions will diverge. */
+ return _partition_max_start (label_type);
+}
+
static int
_check_partition (PedDisk* disk, PedPartition* part)
{
return 0;
}
+ if (!(part->type & PED_PARTITION_METADATA)) {
+ char const *label_type = disk->type->name;
+ /* Enforce some restrictions inherent in the DOS
+ partition table format. Without these, one would be able
+ to create a 2TB partition (or larger), and it would work,
+ but only until the next reboot. This was insidious: the
+ too-large partition would work initially, because with
+ Linux-2.4.x and newer we set the partition start sector
+ and length (in sectors) accurately and directly via the
+ BLKPG ioctl. However, only the last 32 bits of each
+ number would be written to the partition table, and the
+ next time the system would read/use those corrupted numbers
+ it would usually complain about an invalid partition.
+ The same applies to the starting sector number. */
+
+ if (part->geom.length > _partition_max_len (label_type)) {
+ ped_exception_throw (
+ PED_EXCEPTION_ERROR, PED_EXCEPTION_CANCEL,
+ _("partition length of %jd sectors exceeds the "
+ "%s-partition-table-imposed maximum of %jd"),
+ part->geom.length,
+ label_type,
+ _partition_max_len (label_type));
+ return 0;
+ }
+
+ /* The starting sector number must fit in 32 bytes. */
+ if (part->geom.start > _partition_max_start (label_type)) {
+ ped_exception_throw (
+ PED_EXCEPTION_ERROR, PED_EXCEPTION_CANCEL,
+ _("starting sector number, %jd exceeds the"
+ " %s-partition-table-imposed maximum of %jd"),
+ part->geom.start,
+ label_type,
+ _partition_max_start (label_type));
+ return 0;
+ }
+ }
+
return 1;
}
t2000-mkfs.sh \
t2100-mkswap.sh \
t3000-constraints.sh \
- t3100-resize-ext2-partion.sh
+ t3100-resize-ext2-partion.sh \
+ t4100-msdos-partition-limits.sh \
+ t4100-dvh-partition-limits.sh
EXTRA_DIST = \
$(TESTS) test-lib.sh mkdtemp
--- /dev/null
+#!/bin/sh
+
+# Copyright (C) 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+test_description='enforce limits on partition start sector and length'
+
+# Need root privileges to use mount.
+privileges_required_=1
+
+. ./init.sh
+
+####################################################
+# Create and mount a file system capable of dealing with >=2TB files.
+# We must be able to create a file with an apparent length of 2TB or larger.
+# It needn't be a large file system.
+fs=fs_file
+mp=`pwd`/mount-point
+n=4096
+
+test_expect_success \
+ 'create an XFS file system' \
+ '
+ dd if=/dev/zero of=$fs bs=1MB count=2 seek=20 &&
+ mkfs.xfs -q $fs &&
+ mkdir "$mp"
+
+ '
+
+# Unmount upon interrupt, failure, etc., as well as upon normal completion.
+cleanup_() { cd "$test_dir_" && umount "$mp" > /dev/null 2>&1; }
+
+test_expect_success \
+ 'mount it' \
+ '
+ mount -o loop $fs "$mp" &&
+ cd "$mp"
+
+ '
+dev=loop-file
+
+do_mkpart()
+{
+ start_sector=$1
+ end_sector=$2
+ # echo '********' $(echo $end_sector - $start_sector + 1 |bc)
+ dd if=/dev/zero of=$dev bs=1b count=2k seek=$end_sector 2> /dev/null &&
+ parted -s $dev mklabel $table_type &&
+ parted -s $dev mkpart p xfs ${start_sector}s ${end_sector}s
+}
+
+# Specify the starting sector number and length in sectors,
+# rather than start and end.
+do_mkpart_start_and_len()
+{
+ start_sector=$1
+ len=$2
+ end_sector=$(echo $start_sector + $len - 1|bc)
+ do_mkpart $start_sector $end_sector
+}
+
+for table_type in dvh; do
+
+test_expect_success \
+ "$table_type: a partition length of 2^32-1 works." \
+ '
+ end=$(echo $n+2^32-2|bc) &&
+ do_mkpart $n $end
+ '
+
+test_expect_success \
+ 'print the result' \
+ 'parted -s $dev unit s p > out 2>&1 &&
+ sed -n "/^ *1 *$n/s/ */ /gp" out|sed "s/ *\$//" > k && mv k out &&
+ echo " 1 ${n}s ${end}s 4294967295s primary" > exp &&
+ diff -u out exp
+ '
+
+test_expect_failure \
+ "$table_type: a partition length of exactly 2^32 sectors provokes failure." \
+ 'do_mkpart $n $(echo $n+2^32-1|bc) > err 2>&1'
+
+bad_part_length()
+{ echo "Error: partition length of $1 sectors exceeds the"\
+ "$table_type-partition-table-imposed maximum of 4294967295"; }
+test_expect_success \
+ 'check for new diagnostic' \
+ 'bad_part_length 4294967296 > exp && diff -u err exp'
+
+# FIXME: investigate this.
+# Unexpectedly to me, both of these failed with this same diagnostic:
+#
+# Error: partition length of 4294967296 sectors exceeds the \
+# DOS-partition-table-imposed maximum of 2^32-1" > exp &&
+#
+# I expected the one below to fail with a length of _4294967297_.
+# Debugging, I see that _check_partition *does* detect this,
+# but the diagnostic doesn't get displayed because of the wonders
+# of parted's exception mechanism.
+
+test_expect_failure \
+ "$table_type: a partition length of 2^32+1 sectors provokes failure." \
+ 'do_mkpart $n $(echo $n+2^32|bc) > err 2>&1'
+
+test_expect_success \
+ 'check for new diagnostic' \
+ 'bad_part_length 4294967297 > exp && diff -u err exp'
+
+# =========================================================
+# Now consider partition starting sector numbers.
+bad_start_sector()
+{ echo "Error: starting sector number, $1 exceeds the"\
+ "$table_type-partition-table-imposed maximum of 4294967295"; }
+
+test_expect_success \
+ "$table_type: a partition start sector number of 2^32-1 works." \
+ 'do_mkpart_start_and_len $(echo 2^32-1|bc) 1000'
+
+# FIXME: this partition number 9 (not requested!) looks totally bogus
+# FIXME: For now, we just expect what the code produces.
+# FIXME: In the long run, figure out if it's sensible.
+cat > exp <<EOF
+Model: (file)
+Disk: 4294970342s
+Sector size (logical/physical): 512B/512B
+Partition Table: $table_type
+
+Number Start End Size Type File system Name Flags
+ 9 0s 4095s 4096s extended
+ 1 4294967295s 4294968294s 1000s primary
+
+EOF
+
+test_expect_success \
+ 'print the result' \
+ 'parted -s $dev unit s p > out 2>&1 &&
+ sed "s/Disk .*:/Disk:/;s/ *$//" out > k && mv k out &&
+ diff -u out exp
+ '
+
+test_expect_failure \
+ "$table_type: a partition start sector number of 2^32 must fail." \
+ 'do_mkpart_start_and_len $(echo 2^32|bc) 1000 > err 2>&1'
+test_expect_success \
+ 'check for new diagnostic' \
+ 'bad_start_sector 4294967296 > exp && diff -u err exp'
+
+test_expect_failure \
+ "$table_type: a partition start sector number of 2^32+1 must fail, too." \
+ 'do_mkpart_start_and_len $(echo 2^32+1|bc) 1000 > err 2>&1'
+test_expect_success \
+ 'check for new diagnostic' \
+ 'bad_start_sector 4294967297 > exp && diff -u err exp'
+
+done
+
+test_done
--- /dev/null
+#!/bin/sh
+
+# Copyright (C) 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+test_description='enforce limits on partition start sector and length'
+
+# Need root privileges to use mount.
+privileges_required_=1
+
+. ./init.sh
+
+####################################################
+# Create and mount a file system capable of dealing with >=2TB files.
+# We must be able to create a file with an apparent length of 2TB or larger.
+# It needn't be a large file system.
+fs=fs_file
+mp=`pwd`/mount-point
+n=4096
+
+test_expect_success \
+ 'create an XFS file system' \
+ '
+ dd if=/dev/zero of=$fs bs=1MB count=2 seek=20 &&
+ mkfs.xfs -q $fs &&
+ mkdir "$mp"
+
+ '
+
+# Unmount upon interrupt, failure, etc., as well as upon normal completion.
+cleanup_() { cd "$test_dir_" && umount "$mp" > /dev/null 2>&1; }
+
+test_expect_success \
+ 'mount it' \
+ '
+ mount -o loop $fs "$mp" &&
+ cd "$mp"
+
+ '
+dev=loop-file
+
+do_mkpart()
+{
+ start_sector=$1
+ end_sector=$2
+ # echo '********' $(echo $end_sector - $start_sector + 1 |bc)
+ dd if=/dev/zero of=$dev bs=1b count=2k seek=$end_sector 2> /dev/null &&
+ parted -s $dev mklabel $table_type &&
+ parted -s $dev mkpart p xfs ${start_sector}s ${end_sector}s
+}
+
+# Specify the starting sector number and length in sectors,
+# rather than start and end.
+do_mkpart_start_and_len()
+{
+ start_sector=$1
+ len=$2
+ end_sector=$(echo $start_sector + $len - 1|bc)
+ do_mkpart $start_sector $end_sector
+}
+
+for table_type in msdos; do
+
+test_expect_success \
+ "$table_type: a partition length of 2^32-1 works." \
+ '
+ end=$(echo $n+2^32-2|bc) &&
+ do_mkpart $n $end
+ '
+
+test_expect_success \
+ 'print the result' \
+ 'parted -s $dev unit s p > out 2>&1 &&
+ sed -n "/^ *1 *$n/s/ */ /gp" out|sed "s/ *\$//" > k && mv k out &&
+ echo " 1 ${n}s ${end}s 4294967295s primary" > exp &&
+ diff -u out exp
+ '
+
+test_expect_failure \
+ "$table_type: a partition length of exactly 2^32 sectors provokes failure." \
+ 'do_mkpart $n $(echo $n+2^32-1|bc) > err 2>&1'
+
+bad_part_length()
+{ echo "Error: partition length of $1 sectors exceeds the"\
+ "$table_type-partition-table-imposed maximum of 4294967295"; }
+test_expect_success \
+ 'check for new diagnostic' \
+ 'bad_part_length 4294967296 > exp && diff -u err exp'
+
+# FIXME: investigate this.
+# Unexpectedly to me, both of these failed with this same diagnostic:
+#
+# Error: partition length of 4294967296 sectors exceeds the \
+# DOS-partition-table-imposed maximum of 2^32-1" > exp &&
+#
+# I expected the one below to fail with a length of _4294967297_.
+# Debugging, I see that _check_partition *does* detect this,
+# but the diagnostic doesn't get displayed because of the wonders
+# of parted's exception mechanism.
+
+test_expect_failure \
+ "$table_type: a partition length of 2^32+1 sectors provokes failure." \
+ 'do_mkpart $n $(echo $n+2^32|bc) > err 2>&1'
+
+# FIXME: odd that we asked for 2^32+1, yet the diagnostic says 2^32
+# FIXME: Probably due to constraints.
+# FIXME: For now, just accept the current output.
+test_expect_success \
+ 'check for new diagnostic' \
+ 'bad_part_length 4294967296 > exp && diff -u err exp'
+
+# =========================================================
+# Now consider partition starting sector numbers.
+bad_start_sector()
+{ echo "Error: starting sector number, $1 exceeds the"\
+ "$table_type-partition-table-imposed maximum of 4294967295"; }
+
+test_expect_success \
+ "$table_type: a partition start sector number of 2^32-1 works." \
+ 'do_mkpart_start_and_len $(echo 2^32-1|bc) 1000'
+
+cat > exp <<EOF
+Model: (file)
+Disk: 4294970342s
+Sector size (logical/physical): 512B/512B
+Partition Table: $table_type
+
+Number Start End Size Type File system Flags
+ 1 4294967295s 4294968294s 1000s primary
+
+EOF
+
+test_expect_success \
+ 'print the result' \
+ 'parted -s $dev unit s p > out 2>&1 &&
+ sed "s/Disk .*:/Disk:/;s/ *$//" out > k && mv k out &&
+ diff -u out exp
+ '
+
+test_expect_failure \
+ "$table_type: a partition start sector number of 2^32 must fail." \
+ 'do_mkpart_start_and_len $(echo 2^32|bc) 1000 > err 2>&1'
+test_expect_success \
+ 'check for new diagnostic' \
+ 'bad_start_sector 4294967296 > exp && diff -u err exp'
+
+test_expect_failure \
+ "$table_type: a partition start sector number of 2^32+1 must fail, too." \
+ 'do_mkpart_start_and_len $(echo 2^32+1|bc) 1000 > err 2>&1'
+test_expect_success \
+ 'check for new diagnostic' \
+ 'bad_start_sector 4294967296 > exp && diff -u err exp'
+
+done
+
+test_done