#define CONST_MASK_ADDR(nr, addr) WBYTE_ADDR((void *)(addr) + ((nr)>>3))
#define CONST_MASK(nr) (1 << ((nr) & 7))
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered. See __set_bit()
- * if you do not require the atomic guarantees.
- *
- * Note: there are no guarantees that this function will not be reordered
- * on non x86 architectures, so if you are writing portable code,
- * make sure not to rely on its reordering guarantees.
- *
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
static __always_inline void
-set_bit(long nr, volatile unsigned long *addr)
+arch_set_bit(long nr, volatile unsigned long *addr)
{
if (IS_IMMEDIATE(nr)) {
asm volatile(LOCK_PREFIX "orb %1,%0"
}
}
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __always_inline void __set_bit(long nr, volatile unsigned long *addr)
+static __always_inline void
+arch___set_bit(long nr, volatile unsigned long *addr)
{
asm volatile(__ASM_SIZE(bts) " %1,%0" : : ADDR, "Ir" (nr) : "memory");
}
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered. However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic()
- * in order to ensure changes are visible on other processors.
- */
static __always_inline void
-clear_bit(long nr, volatile unsigned long *addr)
+arch_clear_bit(long nr, volatile unsigned long *addr)
{
if (IS_IMMEDIATE(nr)) {
asm volatile(LOCK_PREFIX "andb %1,%0"
}
}
-/*
- * clear_bit_unlock - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and implies release semantics before the memory
- * operation. It can be used for an unlock.
- */
-static __always_inline void clear_bit_unlock(long nr, volatile unsigned long *addr)
+static __always_inline void
+arch_clear_bit_unlock(long nr, volatile unsigned long *addr)
{
barrier();
- clear_bit(nr, addr);
+ arch_clear_bit(nr, addr);
}
-static __always_inline void __clear_bit(long nr, volatile unsigned long *addr)
+static __always_inline void
+arch___clear_bit(long nr, volatile unsigned long *addr)
{
asm volatile(__ASM_SIZE(btr) " %1,%0" : : ADDR, "Ir" (nr) : "memory");
}
-static __always_inline bool clear_bit_unlock_is_negative_byte(long nr, volatile unsigned long *addr)
+static __always_inline bool
+arch_clear_bit_unlock_is_negative_byte(long nr, volatile unsigned long *addr)
{
bool negative;
asm volatile(LOCK_PREFIX "andb %2,%1"
: "ir" ((char) ~(1 << nr)) : "memory");
return negative;
}
+#define arch_clear_bit_unlock_is_negative_byte \
+ arch_clear_bit_unlock_is_negative_byte
-// Let everybody know we have it
-#define clear_bit_unlock_is_negative_byte clear_bit_unlock_is_negative_byte
-
-/*
- * __clear_bit_unlock - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * __clear_bit() is non-atomic and implies release semantics before the memory
- * operation. It can be used for an unlock if no other CPUs can concurrently
- * modify other bits in the word.
- */
-static __always_inline void __clear_bit_unlock(long nr, volatile unsigned long *addr)
+static __always_inline void
+arch___clear_bit_unlock(long nr, volatile unsigned long *addr)
{
- __clear_bit(nr, addr);
+ arch___clear_bit(nr, addr);
}
-/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __always_inline void __change_bit(long nr, volatile unsigned long *addr)
+static __always_inline void
+arch___change_bit(long nr, volatile unsigned long *addr)
{
asm volatile(__ASM_SIZE(btc) " %1,%0" : : ADDR, "Ir" (nr) : "memory");
}
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to change
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __always_inline void change_bit(long nr, volatile unsigned long *addr)
+static __always_inline void
+arch_change_bit(long nr, volatile unsigned long *addr)
{
if (IS_IMMEDIATE(nr)) {
asm volatile(LOCK_PREFIX "xorb %1,%0"
}
}
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __always_inline bool test_and_set_bit(long nr, volatile unsigned long *addr)
+static __always_inline bool
+arch_test_and_set_bit(long nr, volatile unsigned long *addr)
{
return GEN_BINARY_RMWcc(LOCK_PREFIX __ASM_SIZE(bts), *addr, c, "Ir", nr);
}
-/**
- * test_and_set_bit_lock - Set a bit and return its old value for lock
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This is the same as test_and_set_bit on x86.
- */
static __always_inline bool
-test_and_set_bit_lock(long nr, volatile unsigned long *addr)
+arch_test_and_set_bit_lock(long nr, volatile unsigned long *addr)
{
- return test_and_set_bit(nr, addr);
+ return arch_test_and_set_bit(nr, addr);
}
-/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- */
-static __always_inline bool __test_and_set_bit(long nr, volatile unsigned long *addr)
+static __always_inline bool
+arch___test_and_set_bit(long nr, volatile unsigned long *addr)
{
bool oldbit;
return oldbit;
}
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __always_inline bool test_and_clear_bit(long nr, volatile unsigned long *addr)
+static __always_inline bool
+arch_test_and_clear_bit(long nr, volatile unsigned long *addr)
{
return GEN_BINARY_RMWcc(LOCK_PREFIX __ASM_SIZE(btr), *addr, c, "Ir", nr);
}
-/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail. You must protect multiple accesses with a lock.
- *
+/*
* Note: the operation is performed atomically with respect to
* the local CPU, but not other CPUs. Portable code should not
* rely on this behaviour.
* accessed from a hypervisor on the same CPU if running in a VM: don't change
* this without also updating arch/x86/kernel/kvm.c
*/
-static __always_inline bool __test_and_clear_bit(long nr, volatile unsigned long *addr)
+static __always_inline bool
+arch___test_and_clear_bit(long nr, volatile unsigned long *addr)
{
bool oldbit;
return oldbit;
}
-/* WARNING: non atomic and it can be reordered! */
-static __always_inline bool __test_and_change_bit(long nr, volatile unsigned long *addr)
+static __always_inline bool
+arch___test_and_change_bit(long nr, volatile unsigned long *addr)
{
bool oldbit;
return oldbit;
}
-/**
- * test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __always_inline bool test_and_change_bit(long nr, volatile unsigned long *addr)
+static __always_inline bool
+arch_test_and_change_bit(long nr, volatile unsigned long *addr)
{
return GEN_BINARY_RMWcc(LOCK_PREFIX __ASM_SIZE(btc), *addr, c, "Ir", nr);
}
return oldbit;
}
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
-/**
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static bool test_bit(int nr, const volatile unsigned long *addr);
-#endif
-
-#define test_bit(nr, addr) \
+#define arch_test_bit(nr, addr) \
(__builtin_constant_p((nr)) \
? constant_test_bit((nr), (addr)) \
: variable_test_bit((nr), (addr)))
#include <asm-generic/bitops/const_hweight.h>
+#include <asm-generic/bitops-instrumented.h>
+
#include <asm-generic/bitops/le.h>
#include <asm-generic/bitops/ext2-atomic-setbit.h>
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * This file provides wrappers with sanitizer instrumentation for bit
+ * operations.
+ *
+ * To use this functionality, an arch's bitops.h file needs to define each of
+ * the below bit operations with an arch_ prefix (e.g. arch_set_bit(),
+ * arch___set_bit(), etc.).
+ */
+#ifndef _ASM_GENERIC_BITOPS_INSTRUMENTED_H
+#define _ASM_GENERIC_BITOPS_INSTRUMENTED_H
+
+#include <linux/kasan-checks.h>
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This is a relaxed atomic operation (no implied memory barriers).
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ arch_set_bit(nr, addr);
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic. If it is called on the same
+ * region of memory concurrently, the effect may be that only one operation
+ * succeeds.
+ */
+static inline void __set_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ arch___set_bit(nr, addr);
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * This is a relaxed atomic operation (no implied memory barriers).
+ */
+static inline void clear_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ arch_clear_bit(nr, addr);
+}
+
+/**
+ * __clear_bit - Clears a bit in memory
+ * @nr: the bit to clear
+ * @addr: the address to start counting from
+ *
+ * Unlike clear_bit(), this function is non-atomic. If it is called on the same
+ * region of memory concurrently, the effect may be that only one operation
+ * succeeds.
+ */
+static inline void __clear_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ arch___clear_bit(nr, addr);
+}
+
+/**
+ * clear_bit_unlock - Clear a bit in memory, for unlock
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This operation is atomic and provides release barrier semantics.
+ */
+static inline void clear_bit_unlock(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ arch_clear_bit_unlock(nr, addr);
+}
+
+/**
+ * __clear_bit_unlock - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * This is a non-atomic operation but implies a release barrier before the
+ * memory operation. It can be used for an unlock if no other CPUs can
+ * concurrently modify other bits in the word.
+ */
+static inline void __clear_bit_unlock(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ arch___clear_bit_unlock(nr, addr);
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * This is a relaxed atomic operation (no implied memory barriers).
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ arch_change_bit(nr, addr);
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to change
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic. If it is called on the same
+ * region of memory concurrently, the effect may be that only one operation
+ * succeeds.
+ */
+static inline void __change_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ arch___change_bit(nr, addr);
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This is an atomic fully-ordered operation (implied full memory barrier).
+ */
+static inline bool test_and_set_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ return arch_test_and_set_bit(nr, addr);
+}
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic. If two instances of this operation race, one
+ * can appear to succeed but actually fail.
+ */
+static inline bool __test_and_set_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ return arch___test_and_set_bit(nr, addr);
+}
+
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value, for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and provides acquire barrier semantics if
+ * the returned value is 0.
+ * It can be used to implement bit locks.
+ */
+static inline bool test_and_set_bit_lock(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ return arch_test_and_set_bit_lock(nr, addr);
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This is an atomic fully-ordered operation (implied full memory barrier).
+ */
+static inline bool test_and_clear_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ return arch_test_and_clear_bit(nr, addr);
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic. If two instances of this operation race, one
+ * can appear to succeed but actually fail.
+ */
+static inline bool __test_and_clear_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ return arch___test_and_clear_bit(nr, addr);
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This is an atomic fully-ordered operation (implied full memory barrier).
+ */
+static inline bool test_and_change_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ return arch_test_and_change_bit(nr, addr);
+}
+
+/**
+ * __test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic. If two instances of this operation race, one
+ * can appear to succeed but actually fail.
+ */
+static inline bool __test_and_change_bit(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ return arch___test_and_change_bit(nr, addr);
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline bool test_bit(long nr, const volatile unsigned long *addr)
+{
+ kasan_check_read(addr + BIT_WORD(nr), sizeof(long));
+ return arch_test_bit(nr, addr);
+}
+
+#if defined(arch_clear_bit_unlock_is_negative_byte)
+/**
+ * clear_bit_unlock_is_negative_byte - Clear a bit in memory and test if bottom
+ * byte is negative, for unlock.
+ * @nr: the bit to clear
+ * @addr: the address to start counting from
+ *
+ * This operation is atomic and provides release barrier semantics.
+ *
+ * This is a bit of a one-trick-pony for the filemap code, which clears
+ * PG_locked and tests PG_waiters,
+ */
+static inline bool
+clear_bit_unlock_is_negative_byte(long nr, volatile unsigned long *addr)
+{
+ kasan_check_write(addr + BIT_WORD(nr), sizeof(long));
+ return arch_clear_bit_unlock_is_negative_byte(nr, addr);
+}
+/* Let everybody know we have it. */
+#define clear_bit_unlock_is_negative_byte clear_bit_unlock_is_negative_byte
+#endif
+
+#endif /* _ASM_GENERIC_BITOPS_INSTRUMENTED_H */
OSDN Git Service
