i2c: i801: Correct Intel Jasper Lake SOC naming

There is no suffix applied to Intel Jasper Lake SOC. Remove it
from the comments and definitions. Besides that, it's a SOC,
thus replace PCH with SOC where it appropriate.

Fixes: e0c61c04791a ("i2c: i801: Add support for Intel Jasper Lake")
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst
index aa4a0e2..b83da0e 100644 (file)
--- a/Documentation/i2c/busses/i2c-i801.rst
+++ b/Documentation/i2c/busses/i2c-i801.rst
@@ -42,7 +42,7 @@ Supported adapters:
   * Intel Comet Lake (PCH)
   * Intel Elkhart Lake (PCH)
   * Intel Tiger Lake (PCH)
-  * Intel Jasper Lake (PCH)
+  * Intel Jasper Lake (SOC)
 
    Datasheets: Publicly available at the Intel website
 

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 45ca099..71e5ee2 100644 (file)
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -145,7 +145,7 @@ config I2C_I801
            Comet Lake (PCH)
            Elkhart Lake (PCH)
            Tiger Lake (PCH)
-           Jasper Lake (PCH)
+           Jasper Lake (SOC)
 
          This driver can also be built as a module.  If so, the module
          will be called i2c-i801.

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index df02040..f5e69fe 100644 (file)
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -67,7 +67,7 @@
  * Comet Lake-H (PCH)          0x06a3  32      hard    yes     yes     yes
  * Elkhart Lake (PCH)          0x4b23  32      hard    yes     yes     yes
  * Tiger Lake-LP (PCH)         0xa0a3  32      hard    yes     yes     yes
- * Jasper Lake-N (PCH)         0x4da3  32      hard    yes     yes     yes
+ * Jasper Lake (SOC)           0x4da3  32      hard    yes     yes     yes
  *
  * Features supported by this driver:
  * Software PEC                                no
@@ -226,7 +226,7 @@
 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS           0x34a3
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS                0x3b30
 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS         0x4b23
-#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_N_SMBUS                0x4da3
+#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS          0x4da3
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS              0x5ad4
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS            0x8c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS         0x8ca2
@@ -1076,7 +1076,7 @@ static const struct pci_device_id i801_ids[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS) },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) },
-       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_N_SMBUS) },
+       { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
        { 0, }
 };
 
@@ -1759,7 +1759,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
        case PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS:
        case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS:
        case PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS:
-       case PCI_DEVICE_ID_INTEL_JASPER_LAKE_N_SMBUS:
+       case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
                priv->features |= FEATURE_BLOCK_PROC;
                priv->features |= FEATURE_I2C_BLOCK_READ;
                priv->features |= FEATURE_IRQ;