Fix regression error messages for platforms Peter doesn't use.

diff --git a/src/test/regress/expected/abstime-solaris-1947.out b/src/test/regress/expected/abstime-solaris-1947.out
index 41a0861..353580b 100644 (file)
--- a/src/test/regress/expected/abstime-solaris-1947.out
+++ b/src/test/regress/expected/abstime-solaris-1947.out
@@ -29,12 +29,12 @@ INSERT INTO ABSTIME_TBL (f1) VALUES (abstime 'May 10, 1947 23:59:12');
 -- what happens if we specify slightly misformatted abstime? 
 INSERT INTO ABSTIME_TBL (f1) VALUES ('Feb 35, 1946 10:00:00');
 ERROR:  date/time field value out of range: "Feb 35, 1946 10:00:00"
-HINT:  Perhaps you need a different DateStyle setting.
+HINT:  Perhaps you need a different "datestyle" setting.
 INSERT INTO ABSTIME_TBL (f1) VALUES ('Feb 28, 1984 25:08:10');
 ERROR:  date/time field value out of range: "Feb 28, 1984 25:08:10"
 -- badly formatted abstimes:  these should result in invalid abstimes 
 INSERT INTO ABSTIME_TBL (f1) VALUES ('bad date format');
-ERROR:  invalid input syntax for abstime: "bad date format"
+ERROR:  invalid input syntax for type abstime: "bad date format"
 INSERT INTO ABSTIME_TBL (f1) VALUES ('Jun 10, 1843');
 -- test abstime operators
 SELECT '' AS eight, ABSTIME_TBL.*;

diff --git a/src/test/regress/expected/float4-exp-three-digits.out b/src/test/regress/expected/float4-exp-three-digits.out
index db982a4..9999939 100644 (file)
--- a/src/test/regress/expected/float4-exp-three-digits.out
+++ b/src/test/regress/expected/float4-exp-three-digits.out
@@ -9,13 +9,13 @@ INSERT INTO FLOAT4_TBL(f1) VALUES ('1.2345678901234e+20');
 INSERT INTO FLOAT4_TBL(f1) VALUES ('1.2345678901234e-20');
 -- test for over and under flow 
 INSERT INTO FLOAT4_TBL(f1) VALUES ('10e40');
-ERROR:  float4 value out of range: overflow
+ERROR:  type "real" value out of range: overflow
 INSERT INTO FLOAT4_TBL(f1) VALUES ('-10e40');
-ERROR:  float4 value out of range: overflow
+ERROR:  type "real" value out of range: overflow
 INSERT INTO FLOAT4_TBL(f1) VALUES ('10e-40');
-ERROR:  float4 value out of range: underflow
+ERROR:  type "real" value out of range: underflow
 INSERT INTO FLOAT4_TBL(f1) VALUES ('-10e-40');
-ERROR:  float4 value out of range: underflow
+ERROR:  type "real" value out of range: underflow
 SELECT '' AS five, FLOAT4_TBL.*;
  five |      f1      
 ------+--------------

diff --git a/src/test/regress/expected/float8-exp-three-digits.out b/src/test/regress/expected/float8-exp-three-digits.out
index 3803ff6..8113a3b 100644 (file)
--- a/src/test/regress/expected/float8-exp-three-digits.out
+++ b/src/test/regress/expected/float8-exp-three-digits.out
@@ -247,13 +247,13 @@ UPDATE FLOAT8_TBL
    SET f1 = FLOAT8_TBL.f1 * '-1'
    WHERE FLOAT8_TBL.f1 > '0.0';
 SELECT '' AS bad, f.f1 * '1e200' from FLOAT8_TBL f;
-ERROR:  float8 value out of range: overflow
+ERROR:  type "double precision" value out of range: overflow
 SELECT '' AS bad, f.f1 ^ '1e200' from FLOAT8_TBL f;
 ERROR:  result is out of range
 SELECT '' AS bad, ln(f.f1) from FLOAT8_TBL f where f.f1 = '0.0' ;
-ERROR:  cannot take log of zero
+ERROR:  cannot take logarithm of zero
 SELECT '' AS bad, ln(f.f1) from FLOAT8_TBL f where f.f1 < '0.0' ;
-ERROR:  cannot take log of a negative number
+ERROR:  cannot take logarithm of a negative number
 SELECT '' AS bad, exp(f.f1) from FLOAT8_TBL f;
 ERROR:  result is out of range
 SELECT '' AS bad, f.f1 / '0.0' from FLOAT8_TBL f;
@@ -270,13 +270,13 @@ SELECT '' AS five, FLOAT8_TBL.*;
 
 -- test for over- and underflow 
 INSERT INTO FLOAT8_TBL(f1) VALUES ('10e400');
-ERROR:  "10e400" is out of range for float8
+ERROR:  "10e400" is out of range for type double precision
 INSERT INTO FLOAT8_TBL(f1) VALUES ('-10e400');
-ERROR:  "-10e400" is out of range for float8
+ERROR:  "-10e400" is out of range for type double precision
 INSERT INTO FLOAT8_TBL(f1) VALUES ('10e-400');
-ERROR:  "10e-400" is out of range for float8
+ERROR:  "10e-400" is out of range for type double precision
 INSERT INTO FLOAT8_TBL(f1) VALUES ('-10e-400');
-ERROR:  "-10e-400" is out of range for float8
+ERROR:  "-10e-400" is out of range for type double precision
 -- maintain external table consistency across platforms
 -- delete all values and reinsert well-behaved ones
 DELETE FROM FLOAT8_TBL;

diff --git a/src/test/regress/expected/float8-fp-exception.out b/src/test/regress/expected/float8-fp-exception.out
index 4e30cc9..091b0f6 100644 (file)
--- a/src/test/regress/expected/float8-fp-exception.out
+++ b/src/test/regress/expected/float8-fp-exception.out
@@ -252,9 +252,9 @@ DETAIL:  An invalid floating-point operation was signaled. This probably means a
 SELECT '' AS bad, f.f1 ^ '1e200' from FLOAT8_TBL f;
 ERROR:  result is out of range
 SELECT '' AS bad, ln(f.f1) from FLOAT8_TBL f where f.f1 = '0.0' ;
-ERROR:  cannot take log of zero
+ERROR:  cannot take logarithm of zero
 SELECT '' AS bad, ln(f.f1) from FLOAT8_TBL f where f.f1 < '0.0' ;
-ERROR:  cannot take log of a negative number
+ERROR:  cannot take logarithm of a negative number
 SELECT '' AS bad, exp(f.f1) from FLOAT8_TBL f;
 ERROR:  result is out of range
 SELECT '' AS bad, f.f1 / '0.0' from FLOAT8_TBL f;
@@ -271,13 +271,13 @@ SELECT '' AS five, FLOAT8_TBL.*;
 
 -- test for over- and underflow 
 INSERT INTO FLOAT8_TBL(f1) VALUES ('10e400');
-ERROR:  "10e400" is out of range for float8
+ERROR:  "10e400" is out of range for type double precision
 INSERT INTO FLOAT8_TBL(f1) VALUES ('-10e400');
-ERROR:  "-10e400" is out of range for float8
+ERROR:  "-10e400" is out of range for type double precision
 INSERT INTO FLOAT8_TBL(f1) VALUES ('10e-400');
-ERROR:  "10e-400" is out of range for float8
+ERROR:  "10e-400" is out of range for type double precision
 INSERT INTO FLOAT8_TBL(f1) VALUES ('-10e-400');
-ERROR:  "-10e-400" is out of range for float8
+ERROR:  "-10e-400" is out of range for type double precision
 -- maintain external table consistency across platforms
 -- delete all values and reinsert well-behaved ones
 DELETE FROM FLOAT8_TBL;

diff --git a/src/test/regress/expected/float8-small-is-zero.out b/src/test/regress/expected/float8-small-is-zero.out
index 716c0fe..618d4de 100644 (file)
--- a/src/test/regress/expected/float8-small-is-zero.out
+++ b/src/test/regress/expected/float8-small-is-zero.out
@@ -247,13 +247,13 @@ UPDATE FLOAT8_TBL
    SET f1 = FLOAT8_TBL.f1 * '-1'
    WHERE FLOAT8_TBL.f1 > '0.0';
 SELECT '' AS bad, f.f1 * '1e200' from FLOAT8_TBL f;
-ERROR:  float8 value out of range: overflow
+ERROR:  type "double precision" value out of range: overflow
 SELECT '' AS bad, f.f1 ^ '1e200' from FLOAT8_TBL f;
 ERROR:  result is out of range
 SELECT '' AS bad, ln(f.f1) from FLOAT8_TBL f where f.f1 = '0.0' ;
-ERROR:  cannot take log of zero
+ERROR:  cannot take logarithm of zero
 SELECT '' AS bad, ln(f.f1) from FLOAT8_TBL f where f.f1 < '0.0' ;
-ERROR:  cannot take log of a negative number
+ERROR:  cannot take logarithm of a negative number
 SELECT '' AS bad, exp(f.f1) from FLOAT8_TBL f;
 ERROR:  result is out of range
 SELECT '' AS bad, f.f1 / '0.0' from FLOAT8_TBL f;
@@ -270,9 +270,9 @@ SELECT '' AS five, FLOAT8_TBL.*;
 
 -- test for over- and underflow 
 INSERT INTO FLOAT8_TBL(f1) VALUES ('10e400');
-ERROR:  "10e400" is out of range for float8
+ERROR:  "10e400" is out of range for type double precision
 INSERT INTO FLOAT8_TBL(f1) VALUES ('-10e400');
-ERROR:  "-10e400" is out of range for float8
+ERROR:  "-10e400" is out of range for type double precision
 INSERT INTO FLOAT8_TBL(f1) VALUES ('10e-400');
 INSERT INTO FLOAT8_TBL(f1) VALUES ('-10e-400');
 -- maintain external table consistency across platforms

diff --git a/src/test/regress/expected/horology-no-DST-before-1970.out b/src/test/regress/expected/horology-no-DST-before-1970.out
index 379e17e..cf95486 100644 (file)
--- a/src/test/regress/expected/horology-no-DST-before-1970.out
+++ b/src/test/regress/expected/horology-no-DST-before-1970.out
@@ -82,7 +82,7 @@ SELECT timestamp with time zone '12/27/2001 04:05:06.789-08';
 -- should fail in mdy mode:
 SELECT timestamp with time zone '27/12/2001 04:05:06.789-08';
 ERROR:  date/time field value out of range: "27/12/2001 04:05:06.789-08"
-HINT:  Perhaps you need a different DateStyle setting.
+HINT:  Perhaps you need a different "datestyle" setting.
 set datestyle to dmy;
 SELECT timestamp with time zone '27/12/2001 04:05:06.789-08';
            timestamptz            
@@ -306,7 +306,7 @@ SELECT date '1991-02-03' - time '04:05:06' AS "Subtract Time";
 
 SELECT date '1991-02-03' - time with time zone '04:05:06 UTC' AS "Subtract Time UTC";
 ERROR:  operator does not exist: date - time with time zone
-HINT:  No operator matches the given name and argument type(s). You may need to add explicit typecasts.
+HINT:  No operator matches the given name and argument type(s). You may need to add explicit type casts.
 --
 -- timestamp, interval arithmetic
 --
@@ -2356,7 +2356,7 @@ SELECT '' AS two, d1 AS "timestamp", abstime(d1) AS abstime
 
 SELECT '' AS three, f1 as abstime, cast(f1 as timestamp) AS "timestamp"
   FROM ABSTIME_TBL WHERE NOT isfinite(f1);
-ERROR:  cannot convert "invalid" abstime to timestamp
+ERROR:  cannot convert abstime "invalid" to timestamp
 SELECT '' AS ten, f1 AS interval, reltime(f1) AS reltime
   FROM INTERVAL_TBL;
  ten |           interval            |            reltime            

diff --git a/src/test/regress/expected/horology-solaris-1947.out b/src/test/regress/expected/horology-solaris-1947.out
index c5c7077..4636697 100644 (file)
--- a/src/test/regress/expected/horology-solaris-1947.out
+++ b/src/test/regress/expected/horology-solaris-1947.out
@@ -82,7 +82,7 @@ SELECT timestamp with time zone '12/27/2001 04:05:06.789-08';
 -- should fail in mdy mode:
 SELECT timestamp with time zone '27/12/2001 04:05:06.789-08';
 ERROR:  date/time field value out of range: "27/12/2001 04:05:06.789-08"
-HINT:  Perhaps you need a different DateStyle setting.
+HINT:  Perhaps you need a different "datestyle" setting.
 set datestyle to dmy;
 SELECT timestamp with time zone '27/12/2001 04:05:06.789-08';
            timestamptz            
@@ -306,7 +306,7 @@ SELECT date '1991-02-03' - time '04:05:06' AS "Subtract Time";
 
 SELECT date '1991-02-03' - time with time zone '04:05:06 UTC' AS "Subtract Time UTC";
 ERROR:  operator does not exist: date - time with time zone
-HINT:  No operator matches the given name and argument type(s). You may need to add explicit typecasts.
+HINT:  No operator matches the given name and argument type(s). You may need to add explicit type casts.
 --
 -- timestamp, interval arithmetic
 --
@@ -2356,7 +2356,7 @@ SELECT '' AS two, d1 AS "timestamp", abstime(d1) AS abstime
 
 SELECT '' AS three, f1 as abstime, cast(f1 as timestamp) AS "timestamp"
   FROM ABSTIME_TBL WHERE NOT isfinite(f1);
-ERROR:  cannot convert "invalid" abstime to timestamp
+ERROR:  cannot convert abstime "invalid" to timestamp
 SELECT '' AS ten, f1 AS interval, reltime(f1) AS reltime
   FROM INTERVAL_TBL;
  ten |           interval            |            reltime            

diff --git a/src/test/regress/expected/select_implicit.out b/src/test/regress/expected/select_implicit.out
index 906cbbf..4c8022d 100644 (file)
--- a/src/test/regress/expected/select_implicit.out
+++ b/src/test/regress/expected/select_implicit.out
@@ -44,7 +44,7 @@ SELECT count(*) FROM test_missing_target GROUP BY test_missing_target.c ORDER BY
 --   w/o existing GROUP BY target and w/o existing a different ORDER BY target
 --   failure expected
 SELECT count(*) FROM test_missing_target GROUP BY a ORDER BY b;
-ERROR:  column "test_missing_target.b" must appear in GROUP BY clause or used in an aggregate function
+ERROR:  column "test_missing_target.b" must appear in the GROUP BY clause or be used in an aggregate function
 --   w/o existing GROUP BY target and w/o existing same ORDER BY target
 SELECT count(*) FROM test_missing_target GROUP BY b ORDER BY b;
  count 
@@ -235,7 +235,7 @@ ORDER BY lower(test_missing_target.c);
 --   w/o existing GROUP BY target and w/o existing a different ORDER BY target
 --   failure expected
 SELECT count(a) FROM test_missing_target GROUP BY a ORDER BY b;
-ERROR:  column "test_missing_target.b" must appear in GROUP BY clause or used in an aggregate function
+ERROR:  column "test_missing_target.b" must appear in the GROUP BY clause or be used in an aggregate function
 --   w/o existing GROUP BY target and w/o existing same ORDER BY target
 SELECT count(b) FROM test_missing_target GROUP BY b/2 ORDER BY b/2;
  count 

diff --git a/src/test/regress/expected/select_implicit_1.out b/src/test/regress/expected/select_implicit_1.out
index fcdcb9c..7e316dd 100644 (file)
--- a/src/test/regress/expected/select_implicit_1.out
+++ b/src/test/regress/expected/select_implicit_1.out
@@ -44,7 +44,7 @@ SELECT count(*) FROM test_missing_target GROUP BY test_missing_target.c ORDER BY
 --   w/o existing GROUP BY target and w/o existing a different ORDER BY target
 --   failure expected
 SELECT count(*) FROM test_missing_target GROUP BY a ORDER BY b;
-ERROR:  attribute "test_missing_target.b" must be GROUPed or used in an aggregate function
+ERROR:  column "test_missing_target.b" must appear in the GROUP BY clause or be used in an aggregate function
 --   w/o existing GROUP BY target and w/o existing same ORDER BY target
 SELECT count(*) FROM test_missing_target GROUP BY b ORDER BY b;
  count 
@@ -114,7 +114,7 @@ SELECT c, count(*) FROM test_missing_target GROUP BY 1 ORDER BY 1;
 --   group using reference number out of range
 --   failure expected
 SELECT c, count(*) FROM test_missing_target GROUP BY 3;
-ERROR:  GROUP BY position 3 is not in target list
+ERROR:  GROUP BY position 3 is not in select list
 --   group w/o existing GROUP BY and ORDER BY target under ambiguous condition
 --   failure expected
 SELECT count(*) FROM test_missing_target x, test_missing_target y 
@@ -235,7 +235,7 @@ ORDER BY lower(test_missing_target.c);
 --   w/o existing GROUP BY target and w/o existing a different ORDER BY target
 --   failure expected
 SELECT count(a) FROM test_missing_target GROUP BY a ORDER BY b;
-ERROR:  attribute "test_missing_target.b" must be GROUPed or used in an aggregate function
+ERROR:  column "test_missing_target.b" must appear in the GROUP BY clause or be used in an aggregate function
 --   w/o existing GROUP BY target and w/o existing same ORDER BY target
 SELECT count(b) FROM test_missing_target GROUP BY b/2 ORDER BY b/2;
  count 

diff --git a/src/test/regress/expected/select_implicit_2.out b/src/test/regress/expected/select_implicit_2.out
index b399ceb..b45197f 100644 (file)
--- a/src/test/regress/expected/select_implicit_2.out
+++ b/src/test/regress/expected/select_implicit_2.out
@@ -44,7 +44,7 @@ SELECT count(*) FROM test_missing_target GROUP BY test_missing_target.c ORDER BY
 --   w/o existing GROUP BY target and w/o existing a different ORDER BY target
 --   failure expected
 SELECT count(*) FROM test_missing_target GROUP BY a ORDER BY b;
-ERROR:  attribute "test_missing_target.b" must be GROUPed or used in an aggregate function
+ERROR:  column "test_missing_target.b" must appear in the GROUP BY clause or be used in an aggregate function
 --   w/o existing GROUP BY target and w/o existing same ORDER BY target
 SELECT count(*) FROM test_missing_target GROUP BY b ORDER BY b;
  count 
@@ -114,7 +114,7 @@ SELECT c, count(*) FROM test_missing_target GROUP BY 1 ORDER BY 1;
 --   group using reference number out of range
 --   failure expected
 SELECT c, count(*) FROM test_missing_target GROUP BY 3;
-ERROR:  GROUP BY position 3 is not in target list
+ERROR:  GROUP BY position 3 is not in select list
 --   group w/o existing GROUP BY and ORDER BY target under ambiguous condition
 --   failure expected
 SELECT count(*) FROM test_missing_target x, test_missing_target y 
@@ -235,7 +235,7 @@ ORDER BY lower(test_missing_target.c);
 --   w/o existing GROUP BY target and w/o existing a different ORDER BY target
 --   failure expected
 SELECT count(a) FROM test_missing_target GROUP BY a ORDER BY b;
-ERROR:  attribute "test_missing_target.b" must be GROUPed or used in an aggregate function
+ERROR:  column "test_missing_target.b" must appear in the GROUP BY clause or be used in an aggregate function
 --   w/o existing GROUP BY target and w/o existing same ORDER BY target
 SELECT count(b) FROM test_missing_target GROUP BY b/2 ORDER BY b/2;
  count 

diff --git a/src/test/regress/expected/tinterval-solaris-1947.out b/src/test/regress/expected/tinterval-solaris-1947.out
index ebe764b..d3eb745 100644 (file)
--- a/src/test/regress/expected/tinterval-solaris-1947.out
+++ b/src/test/regress/expected/tinterval-solaris-1947.out
@@ -17,10 +17,10 @@ INSERT INTO TINTERVAL_TBL (f1)
 -- badly formatted tintervals 
 INSERT INTO TINTERVAL_TBL (f1)
    VALUES ('["bad time specifications" ""]');
-ERROR:  invalid input syntax for abstime: "bad time specifications"
+ERROR:  invalid input syntax for type abstime: "bad time specifications"
 INSERT INTO TINTERVAL_TBL (f1)
    VALUES ('["" "infinity"]');
-ERROR:  invalid input syntax for abstime: ""
+ERROR:  invalid input syntax for type abstime: ""
 -- test tinterval operators
 SELECT '' AS five, TINTERVAL_TBL.*;
  five |                               f1