Add background MIB counter reading support.
Port MIB counters should only be read when there is link. Otherwise it is
a waste of time as hardware never increases those counters. There are
exceptions as some switches keep track of dropped counts no matter what.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/iopoll.h>
#include <linux/platform_data/microchip-ksz.h>
#include <linux/phy.h>
#include <linux/etherdevice.h>
#include <net/switchdev.h>
#include "ksz_priv.h"
-#include "ksz_common.h"
#include "ksz9477_reg.h"
+#include "ksz_common.h"
static const struct {
int index;
return 0;
}
+static void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
+ u64 *cnt)
+{
+ struct ksz_poll_ctx ctx = {
+ .dev = dev,
+ .port = port,
+ .offset = REG_PORT_MIB_CTRL_STAT__4,
+ };
+ struct ksz_port *p = &dev->ports[port];
+ u32 data;
+ int ret;
+
+ /* retain the flush/freeze bit */
+ data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
+ data |= MIB_COUNTER_READ;
+ data |= (addr << MIB_COUNTER_INDEX_S);
+ ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+ ret = readx_poll_timeout(ksz_pread32_poll, &ctx, data,
+ !(data & MIB_COUNTER_READ), 10, 1000);
+
+ /* failed to read MIB. get out of loop */
+ if (ret < 0) {
+ dev_dbg(dev->dev, "Failed to get MIB\n");
+ return;
+ }
+
+ /* count resets upon read */
+ ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+ *cnt += data;
+}
+
+static void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+ u64 *dropped, u64 *cnt)
+{
+ addr = ksz9477_mib_names[addr].index;
+ ksz9477_r_mib_cnt(dev, port, addr, cnt);
+}
+
+static void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+ u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
+ struct ksz_port *p = &dev->ports[port];
+
+ /* enable/disable the port for flush/freeze function */
+ mutex_lock(&p->mib.cnt_mutex);
+ ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val);
+
+ /* used by MIB counter reading code to know freeze is enabled */
+ p->freeze = freeze;
+ mutex_unlock(&p->mib.cnt_mutex);
+}
+
+static void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
+{
+ struct ksz_port_mib *mib = &dev->ports[port].mib;
+
+ /* flush all enabled port MIB counters */
+ mutex_lock(&mib->cnt_mutex);
+ ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+ MIB_COUNTER_FLUSH_FREEZE);
+ ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH);
+ ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0);
+ mutex_unlock(&mib->cnt_mutex);
+
+ mib->cnt_ptr = 0;
+ memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
+}
+
static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
int port)
{
}
}
-static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
- uint64_t *buf)
-{
- struct ksz_device *dev = ds->priv;
- int i;
- u32 data;
- int timeout;
-
- mutex_lock(&dev->stats_mutex);
-
- for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
- data = MIB_COUNTER_READ;
- data |= ((ksz9477_mib_names[i].index & 0xFF) <<
- MIB_COUNTER_INDEX_S);
- ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
-
- timeout = 1000;
- do {
- ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
- &data);
- usleep_range(1, 10);
- if (!(data & MIB_COUNTER_READ))
- break;
- } while (timeout-- > 0);
-
- /* failed to read MIB. get out of loop */
- if (!timeout) {
- dev_dbg(dev->dev, "Failed to get MIB\n");
- break;
- }
-
- /* count resets upon read */
- ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
-
- dev->mib_value[i] += (uint64_t)data;
- buf[i] = dev->mib_value[i];
- }
-
- mutex_unlock(&dev->stats_mutex);
-}
-
static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
u8 member)
{
/* queue based egress rate limit */
ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+ /* enable global MIB counter freeze function */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
+
/* start switch */
ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
+ ksz_init_mib_timer(dev);
+
return 0;
}
if (!dev->ports)
return -ENOMEM;
for (i = 0; i < dev->mib_port_cnt; i++) {
+ mutex_init(&dev->ports[i].mib.cnt_mutex);
dev->ports[i].mib.counters =
devm_kzalloc(dev->dev,
sizeof(u64) *
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
.phy_setup = ksz9477_phy_setup,
.port_setup = ksz9477_port_setup,
+ .r_mib_cnt = ksz9477_r_mib_cnt,
+ .r_mib_pkt = ksz9477_r_mib_pkt,
+ .freeze_mib = ksz9477_freeze_mib,
+ .port_init_cnt = ksz9477_port_init_cnt,
.shutdown = ksz9477_reset_switch,
.detect = ksz9477_switch_detect,
.init = ksz9477_switch_init,
}
EXPORT_SYMBOL_GPL(ksz_update_port_member);
+static void port_r_cnt(struct ksz_device *dev, int port)
+{
+ struct ksz_port_mib *mib = &dev->ports[port].mib;
+ u64 *dropped;
+
+ /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
+ while (mib->cnt_ptr < dev->reg_mib_cnt) {
+ dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
+ &mib->counters[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+
+ /* last one in storage */
+ dropped = &mib->counters[dev->mib_cnt];
+
+ /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
+ while (mib->cnt_ptr < dev->mib_cnt) {
+ dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
+ dropped, &mib->counters[mib->cnt_ptr]);
+ ++mib->cnt_ptr;
+ }
+ mib->cnt_ptr = 0;
+}
+
+static void ksz_mib_read_work(struct work_struct *work)
+{
+ struct ksz_device *dev = container_of(work, struct ksz_device,
+ mib_read);
+ struct ksz_port_mib *mib;
+ struct ksz_port *p;
+ int i;
+
+ for (i = 0; i < dev->mib_port_cnt; i++) {
+ p = &dev->ports[i];
+ mib = &p->mib;
+ mutex_lock(&mib->cnt_mutex);
+
+ /* Only read MIB counters when the port is told to do.
+ * If not, read only dropped counters when link is not up.
+ */
+ if (!p->read) {
+ const struct dsa_port *dp = dsa_to_port(dev->ds, i);
+
+ if (!netif_carrier_ok(dp->slave))
+ mib->cnt_ptr = dev->reg_mib_cnt;
+ }
+ port_r_cnt(dev, i);
+ p->read = false;
+ mutex_unlock(&mib->cnt_mutex);
+ }
+}
+
+static void mib_monitor(struct timer_list *t)
+{
+ struct ksz_device *dev = from_timer(dev, t, mib_read_timer);
+
+ mod_timer(&dev->mib_read_timer, jiffies + dev->mib_read_interval);
+ schedule_work(&dev->mib_read);
+}
+
+void ksz_init_mib_timer(struct ksz_device *dev)
+{
+ int i;
+
+ /* Read MIB counters every 30 seconds to avoid overflow. */
+ dev->mib_read_interval = msecs_to_jiffies(30000);
+
+ INIT_WORK(&dev->mib_read, ksz_mib_read_work);
+ timer_setup(&dev->mib_read_timer, mib_monitor, 0);
+
+ for (i = 0; i < dev->mib_port_cnt; i++)
+ dev->dev_ops->port_init_cnt(dev, i);
+
+ /* Start the timer 2 seconds later. */
+ dev->mib_read_timer.expires = jiffies + msecs_to_jiffies(2000);
+ add_timer(&dev->mib_read_timer);
+}
+EXPORT_SYMBOL_GPL(ksz_init_mib_timer);
+
int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
{
struct ksz_device *dev = ds->priv;
}
EXPORT_SYMBOL_GPL(ksz_sset_count);
+void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *buf)
+{
+ const struct dsa_port *dp = dsa_to_port(ds, port);
+ struct ksz_device *dev = ds->priv;
+ struct ksz_port_mib *mib;
+
+ mib = &dev->ports[port].mib;
+ mutex_lock(&mib->cnt_mutex);
+
+ /* Only read dropped counters if no link. */
+ if (!netif_carrier_ok(dp->slave))
+ mib->cnt_ptr = dev->reg_mib_cnt;
+ port_r_cnt(dev, port);
+ memcpy(buf, mib->counters, dev->mib_cnt * sizeof(u64));
+ mutex_unlock(&mib->cnt_mutex);
+}
+EXPORT_SYMBOL_GPL(ksz_get_ethtool_stats);
+
int ksz_port_bridge_join(struct dsa_switch *ds, int port,
struct net_device *br)
{
void ksz_switch_remove(struct ksz_device *dev)
{
+ /* timer started */
+ if (dev->mib_read_timer.expires) {
+ del_timer_sync(&dev->mib_read_timer);
+ flush_work(&dev->mib_read);
+ }
+
dev->dev_ops->exit(dev);
dsa_unregister_switch(dev->ds);
/* SPDX-License-Identifier: GPL-2.0
* Microchip switch driver common header
*
- * Copyright (C) 2017-2018 Microchip Technology Inc.
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
*/
#ifndef __KSZ_COMMON_H
#define __KSZ_COMMON_H
void ksz_update_port_member(struct ksz_device *dev, int port);
+void ksz_init_mib_timer(struct ksz_device *dev);
/* Common DSA access functions */
int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
+void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *buf);
int ksz_port_bridge_join(struct dsa_switch *ds, int port,
struct net_device *br);
void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
ksz_write8(dev, addr, data);
}
+struct ksz_poll_ctx {
+ struct ksz_device *dev;
+ int port;
+ int offset;
+};
+
+static inline u32 ksz_pread32_poll(struct ksz_poll_ctx *ctx)
+{
+ u32 data;
+
+ ksz_pread32(ctx->dev, ctx->port, ctx->offset, &data);
+ return data;
+}
+
#endif
#include <linux/etherdevice.h>
#include <net/dsa.h>
-#include "ksz9477_reg.h"
-
struct ksz_io_ops;
struct vlan_table {
};
struct ksz_port_mib {
+ struct mutex cnt_mutex; /* structure access */
u8 cnt_ptr;
u64 *counters;
};
u32 fiber:1; /* port is fiber */
u32 sgmii:1; /* port is SGMII */
u32 force:1;
- u32 link_just_down:1; /* link just goes down */
+ u32 read:1; /* read MIB counters in background */
+ u32 freeze:1; /* MIB counter freeze is enabled */
struct ksz_port_mib mib;
};
struct vlan_table *vlan_cache;
- u64 mib_value[TOTAL_SWITCH_COUNTER_NUM];
-
u8 *txbuf;
struct ksz_port *ports;
u64 *cnt);
void (*r_mib_pkt)(struct ksz_device *dev, int port, u16 addr,
u64 *dropped, u64 *cnt);
+ void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
void (*port_init_cnt)(struct ksz_device *dev, int port);
int (*shutdown)(struct ksz_device *dev);
int (*detect)(struct ksz_device *dev);
OSDN Git Service
